Re: [PATCH v7] drm/msm/dp: reuse generic HDMI codec implementation

[Abhinav Kumar <quic_abhinavk@quicinc.com>]

On 4/23/2025 10:52 AM, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <lumag@kernel.org>
> 
> The MSM DisplayPort driver implements several HDMI codec functions
> in the driver, e.g. it manually manages HDMI codec device registration,
> returning ELD and plugged_cb support. In order to reduce code
> duplication reuse drm_hdmi_audio_* helpers and drm_bridge_connector
> integration.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
> A lot of DisplayPort bridges use HDMI Codec in order to provide audio
> support. Present DRM HDMI Audio support has been written with the HDMI
> and in particular DRM HDMI Connector framework support, however those
> audio helpers can be easily reused for DisplayPort drivers too.
> 
> Patches by Hermes Wu that targeted implementing HDMI Audio support in
> the iTE IT6506 driver pointed out the necessity of allowing one to use
> generic audio helpers for DisplayPort drivers, as otherwise each driver
> has to manually (and correctly) implement the get_eld() and plugged_cb
> support.
> 
> Implement necessary integration in drm_bridge_connector and provide an
> example implementation in the msm/dp driver.
> ---
> Changes in v7:
> - Dropped applied patches
> - Link to v6: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-0-dbd228fa73d7@oss.qualcomm.com
> 
> Changes in v6:
> - Added DRM_BRIDGE_OP_DP_AUDIO and separate set of DisplayPort audio
>    callbacks to the drm_bridge interface (Maxime)
> - Link to v5: https://lore.kernel.org/r/20250307-dp-hdmi-audio-v5-0-f3be215fdb78@linaro.org
> 
> Changes in v5:
> - Rebased on top of linux-next, also handling HDMI audio piece of the
>    MSM HDMI driver.
> - Link to v4: https://lore.kernel.org/r/20250301-dp-hdmi-audio-v4-0-82739daf28cc@linaro.org
> 
> Changes in v4:
> - Rebased on linux-next, adding DRM_BRIDGE_OP_HDMI_AUDIO to Synopsys QP
>    HDMI driver.
> - Drop outdated comment regarding subconnector from the commit message.
> - Link to v3: https://lore.kernel.org/r/20250219-dp-hdmi-audio-v3-0-42900f034b40@linaro.org
> 
> Changes in v3:
> - Dropped DRM_BRIDGE_OP_DisplayPort, added DRM_BRIDGE_OP_HDMI_AUDIO
>    (Laurent, Maxime)
> - Dropped the subconnector patch (again)
> - Link to v2: https://lore.kernel.org/r/20250209-dp-hdmi-audio-v2-0-16db6ebf22ff@linaro.org
> 
> Changes in v2:
> - Added drm_connector_attach_dp_subconnector_property() patches
> - Link to v1: https://lore.kernel.org/r/20250206-dp-hdmi-audio-v1-0-8aa14a8c0d4d@linaro.org
> ---
>   drivers/gpu/drm/msm/Kconfig         |   1 +
>   drivers/gpu/drm/msm/dp/dp_audio.c   | 131 ++++--------------------------------
>   drivers/gpu/drm/msm/dp/dp_audio.h   |  27 ++------
>   drivers/gpu/drm/msm/dp/dp_display.c |  28 ++------
>   drivers/gpu/drm/msm/dp/dp_display.h |   6 --
>   drivers/gpu/drm/msm/dp/dp_drm.c     |   8 +++
>   6 files changed, 31 insertions(+), 170 deletions(-)
> 

Looks fine to me, just one question, please confirm if DP audio was 
re-verified after this change.

Thanks
Abhinav