Re: [PATCH 3/3] media: ipu-bridge: Add GalaxyCore GC5035 and GC8034

[Dan Scally <dan.scally@ideasonboard.com>]

Morning Nicola

On 09/10/2026 08:27, Nicola Fiorillo wrote:
> Add the GC5035 and GC8034 ACPI HIDs, with the link frequencies the two
> sensors use with a 19.2 MHz external clock. Both are found on the CHUWI
> Hi10 X1.
> 
> Assisted-by: claude-opus-5-5
> Signed-off-by: Nicola Fiorillo <nicfio@gmail.com>
> ---
>   drivers/media/pci/intel/ipu-bridge.c | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
> index 3739c4a2a..851096d7d 100644
> --- a/drivers/media/pci/intel/ipu-bridge.c
> +++ b/drivers/media/pci/intel/ipu-bridge.c
> @@ -59,6 +59,10 @@ static const u16 ipu6_ov5693_ncont_clk[] = {
>   };
>   
>   static const struct ipu_sensor_config ipu_supported_sensors[] = {
> +	/* GalaxyCore GC5035 */
> +	IPU_SENSOR_CONFIG("GCTI5035", 1, 422400000),
> +	/* GalaxyCore GC8034 */
> +	IPU_SENSOR_CONFIG("GCTI8034", 1, 268800000),

These entries look ok:

Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>

>   	/* Himax HM1092 */
>   	IPU_SENSOR_CONFIG("HIMX1092", 2, 180000000, 180480000),
>   	/* Himax HM11B1 */