From: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
Vinod Koul <vkoul@kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
"Russell King" <linux@armlinux.org.uk>,
Rob Herring <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"Bhupesh Sharma" <bhupesh.sharma@linaro.org>
Cc: <kernel@quicinc.com>, Andrew Halaney <ahalaney@redhat.com>,
Andrew Lunn <andrew@lunn.ch>, <linux-arm-msm@vger.kernel.org>,
<netdev@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v2 2/3] net: stmmac: Add interconnect support
Date: Fri, 28 Jun 2024 12:43:04 -0700 [thread overview]
Message-ID: <0666cba0-a5bb-44bf-845a-6a1c689cb485@quicinc.com> (raw)
In-Reply-To: <da62cf15-0329-40e5-83f3-16c4b60f7b46@kernel.org>
On 6/26/2024 12:40 AM, Krzysztof Kozlowski wrote:
> On 26/06/2024 01:49, Sagar Cheluvegowda wrote:
>> Add interconnect support to vote for bus bandwidth based
>> on the current speed of the driver.This change adds support
>
> Please do not use "This commit/patch/change", but imperative mood. See
> longer explanation here:
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
>
> Also, space after full stop.
> Agreed, i will fix this in my next patch.
>> for two different paths - one from ethernet to DDR and the
>> other from Apps to ethernet.
>> Vote from each interconnect client is aggregated and the on-chip
>> interconnect hardware is configured to the most appropriate
>> bandwidth profile.
>>
>> Suggested-by: Andrew Halaney <ahalaney@redhat.com>
>> Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
>> ---
>> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++++++
>> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 ++++++++++++
>> include/linux/stmmac.h | 2 ++
>> 4 files changed, 23 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> index b23b920eedb1..56a282d2b8cd 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> @@ -21,6 +21,7 @@
>> #include <linux/ptp_clock_kernel.h>
>> #include <linux/net_tstamp.h>
>> #include <linux/reset.h>
>> +#include <linux/interconnect.h>
>> #include <net/page_pool/types.h>
>> #include <net/xdp.h>
>> #include <uapi/linux/bpf.h>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index b3afc7cb7d72..ec7c61ee44d4 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -985,6 +985,12 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
>> }
>> }
>>
>> +static void stmmac_set_icc_bw(struct stmmac_priv *priv, unsigned int speed)
>> +{
>> + icc_set_bw(priv->plat->axi_icc_path, Mbps_to_icc(speed), Mbps_to_icc(speed));
>> + icc_set_bw(priv->plat->ahb_icc_path, Mbps_to_icc(speed), Mbps_to_icc(speed));
>> +}
>> +
>> static void stmmac_mac_link_down(struct phylink_config *config,
>> unsigned int mode, phy_interface_t interface)
>> {
>> @@ -1080,6 +1086,8 @@ static void stmmac_mac_link_up(struct phylink_config *config,
>> if (priv->plat->fix_mac_speed)
>> priv->plat->fix_mac_speed(priv->plat->bsp_priv, speed, mode);
>>
>> + stmmac_set_icc_bw(priv, speed);
>> +
>> if (!duplex)
>> ctrl &= ~priv->hw->link.duplex;
>> else
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> index 54797edc9b38..e46c94b643a3 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> @@ -642,6 +642,18 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
>> dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
>> }
>>
>> + plat->axi_icc_path = devm_of_icc_get(&pdev->dev, "axi");
>> + if (IS_ERR(plat->axi_icc_path)) {
>> + ret = (void *)plat->axi_icc_path;
>> + goto error_hw_init;
>
> This sounds like an ABI break. Considering the interconnects are not
> required by the binding, are you sure this behaves correctly without
> interconnects in DTS?
>
> Best regards,
> Krzysztof
>
Yes, i did check without the interconnect entries in the dtsi and
things are working fine, devm_of_icc_get is properly clearing out
all the references in the case when "interconnects" are not present
in the dtsi.
In the stmmac driver we are only handling the error case and
if the entries are not present in the dtsi we are simply continuing with
the regular code flow.
Regards,
Sagar
next prev parent reply other threads:[~2024-06-28 19:43 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-25 23:49 [PATCH v2 0/3] Add interconnect support for stmmac driver Sagar Cheluvegowda
2024-06-25 23:49 ` [PATCH v2 1/3] dt-bindings: net: qcom: ethernet: Add interconnect properties Sagar Cheluvegowda
2024-06-26 7:39 ` Krzysztof Kozlowski
2024-06-26 14:53 ` Andrew Halaney
2024-07-02 18:50 ` Sagar Cheluvegowda
2024-06-25 23:49 ` [PATCH v2 2/3] net: stmmac: Add interconnect support Sagar Cheluvegowda
2024-06-26 7:40 ` Krzysztof Kozlowski
2024-06-28 19:43 ` Sagar Cheluvegowda [this message]
2024-06-28 20:12 ` Andrew Lunn
2024-06-26 13:07 ` Andrew Lunn
2024-06-26 23:36 ` Sagar Cheluvegowda
2024-06-27 0:12 ` Andrew Lunn
2024-06-28 21:58 ` Sagar Cheluvegowda
2024-06-28 22:23 ` Andrew Lunn
2024-06-28 22:41 ` Sagar Cheluvegowda
2024-06-26 14:54 ` Andrew Halaney
2024-06-26 23:38 ` Sagar Cheluvegowda
2024-06-27 0:14 ` Andrew Lunn
2024-06-28 19:55 ` Sagar Cheluvegowda
2024-06-25 23:49 ` [PATCH v2 3/3] net: stmmac: Bring down the clocks to lower frequencies when mac link goes down Sagar Cheluvegowda
2024-06-26 14:58 ` Andrew Halaney
2024-06-26 15:10 ` Andrew Lunn
2024-06-28 21:50 ` Sagar Cheluvegowda
2024-07-01 19:18 ` Sagar Cheluvegowda
2024-06-28 22:16 ` Russell King (Oracle)
2024-07-02 23:38 ` Sagar Cheluvegowda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0666cba0-a5bb-44bf-845a-6a1c689cb485@quicinc.com \
--to=quic_scheluve@quicinc.com \
--cc=ahalaney@redhat.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=bhupesh.sharma@linaro.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=kernel@quicinc.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®