Re: [PATCH v1 0/3] usb: dwc3: Avoid using reserved EPs

[Ferry Toth <fntoth@gmail.com>]

Op 16-01-2025 om 16:40 schreef Andy Shevchenko:
> On some platforms (Intel-based and AFAIK ARM-based) the EPs in the gadget
> (USB Device Controller mode) may be reserved for some special means, such as
> tracing. This series extends DT schema and driver to avoid using those.
> Without this the USB gadget mode won't work properly (those devices that
> "luckily" allocated the reserved EPs).
> 
> Ferry already tested the privately sent PoC of this, but I ask him again to
> re-test this version which is slightly different.
> 
> Andy Shevchenko (3):
>    dt-bindings: usb: dwc3: Add a property to reserve endpoints
>    usb: dwc3: gadget: Add support for snps,reserved-endpoints property
>    usb: dwc3: gadget: Skip endpoints ep[18]{in,out} on Intel Merrifield
> 
>   .../devicetree/bindings/usb/snps,dwc3.yaml    | 10 +++++
>   drivers/usb/dwc3/dwc3-pci.c                   |  9 +++++
>   drivers/usb/dwc3/gadget.c                     | 38 ++++++++++++++++++-
>   3 files changed, 56 insertions(+), 1 deletion(-)
> 
Yes I retested this now on v6.13.0-rc7 Intel Merrifield and found no 
problems. Skipping the tracing end point has definitely always been 
needed on this platform. Thanks!

Tested-by: Ferry Toth <fntoth@gmail.com>