From: Joe Perches <joe@perches.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Len Brown <len.brown@intel.com>, Pavel Machek <pavel@ucw.cz>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kees Cook <keescook@chromium.org>,
Anton Vorontsov <anton@enomsg.org>,
Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
linux-pm@vger.kernel.org,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH] power: Add and use pr_fmt
Date: Mon, 04 Mar 2019 09:14:38 -0800 [thread overview]
Message-ID: <06d16c65a81d28016643d714f8aa3dfd7a2ad3ed.camel@perches.com> (raw)
Prefix all printk/pr_<level> messages with "PM: " to make the
logging a bit more consistent.
Miscellanea:
o Convert a few printks to pr_<level>
o Whitespace to align to open parentheses
o Remove embedded "PM: " from pr_debugs as pr_fmt adds it
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/base/power/domain.c | 12 +++++++-----
drivers/base/power/main.c | 21 +++++++++++----------
drivers/base/power/trace.c | 2 ++
drivers/base/power/wakeup.c | 4 +++-
4 files changed, 23 insertions(+), 16 deletions(-)
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 2c334c01fc43..764e0f28979e 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -6,6 +6,8 @@
* This file is released under the GPLv2.
*/
+#define pr_fmt(fmt) "PM: " fmt
+
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/io.h>
@@ -1657,8 +1659,8 @@ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
genpd_lock_nested(genpd, SINGLE_DEPTH_NESTING);
if (!list_empty(&subdomain->master_links) || subdomain->device_count) {
- pr_warn("%s: unable to remove subdomain %s\n", genpd->name,
- subdomain->name);
+ pr_warn("%s: unable to remove subdomain %s\n",
+ genpd->name, subdomain->name);
ret = -EBUSY;
goto out;
}
@@ -1767,7 +1769,7 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
if (ret)
return ret;
} else if (!gov) {
- pr_warn("%s : no governor for states\n", genpd->name);
+ pr_warn("%s: no governor for states\n", genpd->name);
}
device_initialize(&genpd->dev);
@@ -2514,7 +2516,7 @@ static int genpd_parse_state(struct genpd_power_state *genpd_state,
&entry_latency);
if (err) {
pr_debug(" * %pOF missing entry-latency-us property\n",
- state_node);
+ state_node);
return -EINVAL;
}
@@ -2522,7 +2524,7 @@ static int genpd_parse_state(struct genpd_power_state *genpd_state,
&exit_latency);
if (err) {
pr_debug(" * %pOF missing exit-latency-us property\n",
- state_node);
+ state_node);
return -EINVAL;
}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 5a8149829ab3..f80d298de3fa 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -17,6 +17,8 @@
* subsystem list maintains.
*/
+#define pr_fmt(fmt) "PM: " fmt
+
#include <linux/device.h>
#include <linux/export.h>
#include <linux/mutex.h>
@@ -128,7 +130,7 @@ void device_pm_add(struct device *dev)
if (device_pm_not_required(dev))
return;
- pr_debug("PM: Adding info for %s:%s\n",
+ pr_debug("Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
device_pm_check_callbacks(dev);
mutex_lock(&dpm_list_mtx);
@@ -149,7 +151,7 @@ void device_pm_remove(struct device *dev)
if (device_pm_not_required(dev))
return;
- pr_debug("PM: Removing info for %s:%s\n",
+ pr_debug("Removing info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
complete_all(&dev->power.completion);
mutex_lock(&dpm_list_mtx);
@@ -168,7 +170,7 @@ void device_pm_remove(struct device *dev)
*/
void device_pm_move_before(struct device *deva, struct device *devb)
{
- pr_debug("PM: Moving %s:%s before %s:%s\n",
+ pr_debug("Moving %s:%s before %s:%s\n",
deva->bus ? deva->bus->name : "No Bus", dev_name(deva),
devb->bus ? devb->bus->name : "No Bus", dev_name(devb));
/* Delete deva from dpm_list and reinsert before devb. */
@@ -182,7 +184,7 @@ void device_pm_move_before(struct device *deva, struct device *devb)
*/
void device_pm_move_after(struct device *deva, struct device *devb)
{
- pr_debug("PM: Moving %s:%s after %s:%s\n",
+ pr_debug("Moving %s:%s after %s:%s\n",
deva->bus ? deva->bus->name : "No Bus", dev_name(deva),
devb->bus ? devb->bus->name : "No Bus", dev_name(devb));
/* Delete deva from dpm_list and reinsert after devb. */
@@ -195,7 +197,7 @@ void device_pm_move_after(struct device *deva, struct device *devb)
*/
void device_pm_move_last(struct device *dev)
{
- pr_debug("PM: Moving %s:%s to end of list\n",
+ pr_debug("Moving %s:%s to end of list\n",
dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
list_move_tail(&dev->power.entry, &dpm_list);
}
@@ -418,8 +420,8 @@ static void pm_dev_dbg(struct device *dev, pm_message_t state, const char *info)
static void pm_dev_err(struct device *dev, pm_message_t state, const char *info,
int error)
{
- printk(KERN_ERR "PM: Device %s failed to %s%s: error %d\n",
- dev_name(dev), pm_verb(state.event), info, error);
+ pr_err("Device %s failed to %s%s: error %d\n",
+ dev_name(dev), pm_verb(state.event), info, error);
}
static void dpm_show_time(ktime_t starttime, pm_message_t state, int error,
@@ -2022,8 +2024,7 @@ int dpm_prepare(pm_message_t state)
error = 0;
continue;
}
- printk(KERN_INFO "PM: Device %s not prepared "
- "for power transition: code %d\n",
+ pr_info("Device %s not prepared for power transition: code %d\n",
dev_name(dev), error);
put_device(dev);
break;
@@ -2062,7 +2063,7 @@ EXPORT_SYMBOL_GPL(dpm_suspend_start);
void __suspend_report_result(const char *function, void *fn, int ret)
{
if (ret)
- printk(KERN_ERR "%s(): %pF returns %d\n", function, fn, ret);
+ pr_err("%s(): %pF returns %d\n", function, fn, ret);
}
EXPORT_SYMBOL_GPL(__suspend_report_result);
diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c
index b11f47a1e819..2bd9d2c744ca 100644
--- a/drivers/base/power/trace.c
+++ b/drivers/base/power/trace.c
@@ -7,6 +7,8 @@
* devices may be working.
*/
+#define pr_fmt(fmt) "PM: " fmt
+
#include <linux/pm-trace.h>
#include <linux/export.h>
#include <linux/rtc.h>
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index f1fee72ed970..d0e77d56c1d9 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -6,6 +6,8 @@
* This file is released under the GPLv2.
*/
+#define pr_fmt(fmt) "PM: " fmt
+
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/sched/signal.h>
@@ -853,7 +855,7 @@ bool pm_wakeup_pending(void)
raw_spin_unlock_irqrestore(&events_lock, flags);
if (ret) {
- pr_debug("PM: Wakeup pending, aborting suspend\n");
+ pr_debug("Wakeup pending, aborting suspend\n");
pm_print_active_wakeup_sources();
}
next reply other threads:[~2019-03-04 17:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-04 17:14 Joe Perches [this message]
2019-03-04 17:21 ` Kees Cook
2019-03-05 2:15 ` Kevin Hilman
2019-03-11 12:00 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=06d16c65a81d28016643d714f8aa3dfd7a2ad3ed.camel@perches.com \
--to=joe@perches.com \
--cc=anton@enomsg.org \
--cc=ccross@android.com \
--cc=gregkh@linuxfoundation.org \
--cc=keescook@chromium.org \
--cc=khilman@kernel.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=rjw@rjwysocki.net \
--cc=tony.luck@intel.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®