Re: [PATCH v3] usb: hub: add retry routine after intr URB submit error

[Nicolas Saenz Julienne <nsaenzjulienne@suse.de>]

[-- Attachment #1: Type: text/plain, Size: 1245 bytes --]

Hi Oliver,

On Tue, 2018-11-20 at 15:57 +0100, Oliver Neukum wrote:
> On Di, 2018-11-20 at 15:34 +0100, Nicolas Saenz Julienne wrote:
> > The hub sends hot-plug events to the host trough it's interrupt
> > URB. The
> > driver takes care of completing the URB and re-submitting it.
> > Completion
> > errors are handled in the hub_event() work, yet submission errors
> > are
> > ignored, rendering the device unresponsive. All further events are
> > lost.
> > 
> 
> Hi,
> 
> almost. There is no point in kicking of an error handling while aq
> reset is underway. You are checking only "quiescing" but not
> "in_reset".

Anytime "in_reset" is set "quiescing" is also set:

static int hub_pre_reset(struct usb_interface *intf)
{
	struct usb_hub *hub = usb_get_intfdata(intf);

	hub_quiesce(hub, HUB_PRE_RESET); //sets quiesce
	hub->in_reset = 1;
	hub_pm_barrier_for_all_ports(hub);
	return 0;
}

static int hub_post_reset(struct usb_interface *intf)
{
	struct usb_hub *hub = usb_get_intfdata(intf);

	hub->in_reset = 0;
	hub_pm_barrier_for_all_ports(hub);
	hub_activate(hub, HUB_POST_RESET); //clears quiesce
	return 0;
}

I should be OK isn't it?

Regards,
Nicolas

> 
> 	Regards
> 		Oliver
> 


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]