From: Andy Lutomirski <luto@kernel.org>
To: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org,
Steven Rostedt <rostedt@goodmis.org>,
Ingo Molnar <mingo@redhat.com>, Andy Lutomirski <luto@kernel.org>
Subject: [PATCH] tracing: Choose static tp_printk buffer by explicit nesting count
Date: Tue, 24 May 2016 15:52:28 -0700 [thread overview]
Message-ID: <08104c3c8b9b8091fdcc6b4ca2c8c5dcc9dfd77d.1464130297.git.luto@kernel.org> (raw)
Currently, the trace_printk code chooses which static buffer to use based
on what type of atomic context (NMI, IRQ, etc) it's in. Simplify the
code and make it more robust: simply count the nesting depth and choose
a buffer based on the current nesting depth.
The new code will only drop an event if we nest more than 4 deep,
and the old code was guaranteed to malfunction if that happened.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
kernel/trace/trace.c | 83 +++++++++++++++-------------------------------------
1 file changed, 24 insertions(+), 59 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index a2f0b9f33e9b..4508f3bf4a97 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1986,83 +1986,41 @@ static void __trace_userstack(struct trace_array *tr, unsigned long flags)
/* created for use with alloc_percpu */
struct trace_buffer_struct {
- char buffer[TRACE_BUF_SIZE];
+ int nesting;
+ char buffer[4][TRACE_BUF_SIZE];
};
static struct trace_buffer_struct *trace_percpu_buffer;
-static struct trace_buffer_struct *trace_percpu_sirq_buffer;
-static struct trace_buffer_struct *trace_percpu_irq_buffer;
-static struct trace_buffer_struct *trace_percpu_nmi_buffer;
/*
- * The buffer used is dependent on the context. There is a per cpu
- * buffer for normal context, softirq contex, hard irq context and
- * for NMI context. Thise allows for lockless recording.
- *
- * Note, if the buffers failed to be allocated, then this returns NULL
+ * Thise allows for lockless recording. If we're nested too deeply, then
+ * this returns NULL.
*/
static char *get_trace_buf(void)
{
- struct trace_buffer_struct *percpu_buffer;
-
- /*
- * If we have allocated per cpu buffers, then we do not
- * need to do any locking.
- */
- if (in_nmi())
- percpu_buffer = trace_percpu_nmi_buffer;
- else if (in_irq())
- percpu_buffer = trace_percpu_irq_buffer;
- else if (in_softirq())
- percpu_buffer = trace_percpu_sirq_buffer;
- else
- percpu_buffer = trace_percpu_buffer;
+ struct trace_buffer_struct *buffer = this_cpu_ptr(trace_percpu_buffer);
- if (!percpu_buffer)
+ if (!buffer || buffer->nesting >= 4)
return NULL;
- return this_cpu_ptr(&percpu_buffer->buffer[0]);
+ return &buffer->buffer[buffer->nesting++][0];
+}
+
+static void put_trace_buf(void)
+{
+ this_cpu_dec(trace_percpu_buffer->nesting);
}
static int alloc_percpu_trace_buffer(void)
{
struct trace_buffer_struct *buffers;
- struct trace_buffer_struct *sirq_buffers;
- struct trace_buffer_struct *irq_buffers;
- struct trace_buffer_struct *nmi_buffers;
buffers = alloc_percpu(struct trace_buffer_struct);
- if (!buffers)
- goto err_warn;
-
- sirq_buffers = alloc_percpu(struct trace_buffer_struct);
- if (!sirq_buffers)
- goto err_sirq;
-
- irq_buffers = alloc_percpu(struct trace_buffer_struct);
- if (!irq_buffers)
- goto err_irq;
-
- nmi_buffers = alloc_percpu(struct trace_buffer_struct);
- if (!nmi_buffers)
- goto err_nmi;
+ if (WARN(!buffers, "Could not allocate percpu trace_printk buffer"))
+ return -ENOMEM;
trace_percpu_buffer = buffers;
- trace_percpu_sirq_buffer = sirq_buffers;
- trace_percpu_irq_buffer = irq_buffers;
- trace_percpu_nmi_buffer = nmi_buffers;
-
return 0;
-
- err_nmi:
- free_percpu(irq_buffers);
- err_irq:
- free_percpu(sirq_buffers);
- err_sirq:
- free_percpu(buffers);
- err_warn:
- WARN(1, "Could not allocate percpu trace_printk buffer");
- return -ENOMEM;
}
static int buffers_allocated;
@@ -2153,7 +2111,7 @@ int trace_vbprintk(unsigned long ip, const char *fmt, va_list args)
tbuffer = get_trace_buf();
if (!tbuffer) {
len = 0;
- goto out;
+ goto out_nobuffer;
}
len = vbin_printf((u32 *)tbuffer, TRACE_BUF_SIZE/sizeof(int), fmt, args);
@@ -2179,6 +2137,9 @@ int trace_vbprintk(unsigned long ip, const char *fmt, va_list args)
}
out:
+ put_trace_buf();
+
+out_nobuffer:
preempt_enable_notrace();
unpause_graph_tracing();
@@ -2210,7 +2171,7 @@ __trace_array_vprintk(struct ring_buffer *buffer,
tbuffer = get_trace_buf();
if (!tbuffer) {
len = 0;
- goto out;
+ goto out_nobuffer;
}
len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args);
@@ -2229,7 +2190,11 @@ __trace_array_vprintk(struct ring_buffer *buffer,
__buffer_unlock_commit(buffer, event);
ftrace_trace_stack(&global_trace, buffer, flags, 6, pc, NULL);
}
- out:
+
+out_nobuffer:
+ put_trace_buf();
+
+out:
preempt_enable_notrace();
unpause_graph_tracing();
--
2.5.5
next reply other threads:[~2016-05-24 22:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 22:52 Andy Lutomirski [this message]
2016-05-24 23:02 ` Steven Rostedt
2016-05-25 13:16 ` Peter Zijlstra
2016-05-25 13:36 ` Steven Rostedt
2016-05-25 17:59 ` Peter Zijlstra
2016-05-25 20:17 ` Andy Lutomirski
2016-05-25 13:20 ` Namhyung Kim
2016-05-25 20:18 ` Andy Lutomirski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=08104c3c8b9b8091fdcc6b4ca2c8c5dcc9dfd77d.1464130297.git.luto@kernel.org \
--to=luto@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®