mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxim Levitsky <mlevitsk@redhat.com>
To: Sean Christopherson <sean.j.christopherson@intel.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Oliver Upton <oupton@google.com>, Peter Shier <pshier@google.com>
Subject: Re: [PATCH] KVM: x86: Don't attempt to load PDPTRs when 64-bit mode is enabled
Date: Wed, 05 Aug 2020 10:04:26 +0300	[thread overview]
Message-ID: <084a332afc149c0c647e86f71fea49bb0665a843.camel@redhat.com> (raw)
In-Reply-To: <20200714015732.32426-1-sean.j.christopherson@intel.com>

On Mon, 2020-07-13 at 18:57 -0700, Sean Christopherson wrote:
> Don't attempt to load PDPTRs if EFER.LME=1, i.e. if 64-bit mode is
> enabled.  A recent change to reload the PDTPRs when CR0.CD or CR0.NW is
> toggled botched the EFER.LME handling and sends KVM down the PDTPR path
> when is_paging() is true, i.e. when the guest toggles CD/NW in 64-bit
> mode.
> 
> Split the CR0 checks for 64-bit vs. 32-bit PAE into separate paths.  The
> 64-bit path is specifically checking state when paging is toggled on,
> i.e. CR0.PG transititions from 0->1.  The PDPTR path now needs to run if
> the new CR0 state has paging enabled, irrespective of whether paging was
> already enabled.  Trying to shave a few cycles to make the PDPTR path an
> "else if" case is a mess.
> 
> Fixes: d42e3fae6faed ("kvm: x86: Read PDPTEs on CR0.CD and CR0.NW changes")
> Cc: Jim Mattson <jmattson@google.com>
> Cc: Oliver Upton <oupton@google.com>
> Cc: Peter Shier <pshier@google.com>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
> 
> The other way to fix this, with a much smaller diff stat, is to simply
> move the !is_page(vcpu) check inside (vcpu->arch.efer & EFER_LME).  But
> that results in a ridiculous amount of nested conditionals for what is a
> very straightforward check e.g.
> 
> 	if (cr0 & X86_CR0_PG) {
> 		if (vcpu->arch.efer & EFER_LME) }
> 			if (!is_paging(vcpu)) {
> 				...
> 			}
> 		}
> 	}
> 
> Since this doesn't need to be backported anywhere, I didn't see any value
> in having an intermediate step.
> 
>  arch/x86/kvm/x86.c | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 95ef629228691..5f526d94c33f3 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -819,22 +819,22 @@ int kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
>  	if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE))
>  		return 1;
>  
> -	if (cr0 & X86_CR0_PG) {
>  #ifdef CONFIG_X86_64
> -		if (!is_paging(vcpu) && (vcpu->arch.efer & EFER_LME)) {
> -			int cs_db, cs_l;
> +	if ((vcpu->arch.efer & EFER_LME) && !is_paging(vcpu) &&
> +	    (cr0 & X86_CR0_PG)) {
> +		int cs_db, cs_l;
>  
> -			if (!is_pae(vcpu))
> -				return 1;
> -			kvm_x86_ops.get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
> -			if (cs_l)
> -				return 1;
> -		} else
> -#endif
> -		if (is_pae(vcpu) && ((cr0 ^ old_cr0) & pdptr_bits) &&
> -		    !load_pdptrs(vcpu, vcpu->arch.walk_mmu, kvm_read_cr3(vcpu)))
> +		if (!is_pae(vcpu))
> +			return 1;
> +		kvm_x86_ops.get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
> +		if (cs_l)
>  			return 1;
>  	}
> +#endif
> +	if (!(vcpu->arch.efer & EFER_LME) && (cr0 & X86_CR0_PG) &&
> +	    is_pae(vcpu) && ((cr0 ^ old_cr0) & pdptr_bits) &&
> +	    !load_pdptrs(vcpu, vcpu->arch.walk_mmu, kvm_read_cr3(vcpu)))
> +		return 1;
>  
>  	if (!(cr0 & X86_CR0_PG) && kvm_read_cr4_bits(vcpu, X86_CR4_PCIDE))
>  		return 1;

I also investigated this issue (also same thing, OVMF doesn't boot),
and after looking at the intel and amd's PRM, this looks like correct solution.
I also tested this and it works.


Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>

Best regards,
	Maxim Levitsky


  parent reply	other threads:[~2020-08-05  7:04 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-14  1:57 Sean Christopherson
2020-07-14 12:00 ` Vitaly Kuznetsov
2020-07-14 13:21   ` Sean Christopherson
2020-07-14 14:11     ` Vitaly Kuznetsov
2020-07-14 18:55 ` Jim Mattson
2020-07-14 18:58   ` Sean Christopherson
2020-07-14 19:02     ` Jim Mattson
2020-08-04 18:41 ` Sean Christopherson
2020-08-04 18:46   ` Jim Mattson
2020-08-04 19:09     ` Sean Christopherson
2020-08-05  7:04 ` Maxim Levitsky [this message]
2020-08-06 21:32   ` Jim Mattson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=084a332afc149c0c647e86f71fea49bb0665a843.camel@redhat.com \
    --to=mlevitsk@redhat.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oupton@google.com \
    --cc=pbonzini@redhat.com \
    --cc=pshier@google.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®