From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Antoniu Miclaus <antoniu.miclaus@analog.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org
Subject: Re: [PATCH v3 1/2] dt-bindings: rtc: max31335: add max31335 bindings
Date: Tue, 31 Oct 2023 18:08:45 +0100 [thread overview]
Message-ID: <084b6dd7-2078-43ca-90fe-3611c65dad8a@linaro.org> (raw)
In-Reply-To: <20231031153100.92939-1-antoniu.miclaus@analog.com>
On 31/10/2023 16:30, Antoniu Miclaus wrote:
> Document the Analog Devices MAX31335 device tree bindings.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> changes in v3:
> - `trickle-resistor-ohms` description specifies that the property is mandatory
> if trickle charger should be enabled.
> .../devicetree/bindings/rtc/adi,max31335.yaml | 64 +++++++++++++++++++
> 1 file changed, 64 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/adi,max31335.yaml
>
> diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> new file mode 100644
> index 000000000000..8da9cf2565be
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices MAX31335 RTC
> +
> +maintainers:
> + - Antoniu Miclaus <antoniu.miclaus@analog.com>
> +
> +description:
> + Analog Devices MAX31335 I2C RTC ±2ppm Automotive Real-Time Clock with
> + Integrated MEMS Resonator.
> +
> +allOf:
> + - $ref: rtc.yaml#
> +
> +properties:
> + compatible:
> + const: adi,max31335
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + "#clock-cells":
> + description:
> + RTC can be used as a clock source through its clock output pin.
> + const: 0
> +
> + trickle-resistor-ohms:
> + description:
> + Selected resistor for trickle charger. Should be specified if trickle
> + charger should be enabled.
> + enum: [3000, 6000, 11000]
> +
> + aux-voltage-chargeable: true
Drop, it comes with rtc.yaml.
With this property removed:
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
prev parent reply other threads:[~2023-10-31 17:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-31 15:30 Antoniu Miclaus
2023-10-31 15:30 ` [PATCH v3 2/2] rtc: max31335: add driver support Antoniu Miclaus
2023-10-31 16:01 ` Guenter Roeck
2023-10-31 16:28 ` Miclaus, Antoniu
2023-11-01 18:54 ` Alexandre Belloni
2023-10-31 17:08 ` Krzysztof Kozlowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=084b6dd7-2078-43ca-90fe-3611c65dad8a@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®