RE: [PATCH] [media] s5p-mfc: Use decode status instead of display status on MFCv5

[Kamil Debski <k.debski@samsung.com>]

Hi Sjoerd,

> From: linux-media-owner@vger.kernel.org [mailto:linux-media-
> owner@vger.kernel.org] On Behalf Of Sjoerd Simons
> Sent: Monday, September 22, 2014 2:52 PM
> To: Kyungmin Park; Kamil Debski; Arun Kumar K
> Cc: Mauro Carvalho Chehab; linux-arm-kernel@lists.infradead.org; linux-
> media@vger.kernel.org; linux-kernel@vger.kernel.org; linux-samsung-
> soc@vger.kernel.org; Daniel Drake; Sjoerd Simons
> Subject: [PATCH] [media] s5p-mfc: Use decode status instead of display
> status on MFCv5
> 
> Commit 90c0ae50097 changed how the frame_type of a decoded frame
> gets determined, by switching from the get_dec_frame_type to
> get_disp_frame_type operation. Unfortunately it seems that on MFC v5
> the
> result of get_disp_frame_type is always 0 (no display) when decoding
> (tested with H264), resulting in no frame ever being output from the
> decoder.

Could you tell me which firmware version do you use (date)?

Best wishes,
-- 
Kamil Debski
Samsung R&D Institute Poland
 
> This patch reverts MFC v5 to the previous behaviour while keeping the
> new behaviour for v6 and up.
> 
> Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
> ---
>  drivers/media/platform/s5p-mfc/s5p_mfc.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> index d35b041..27ca9d0 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> @@ -264,7 +264,12 @@ static void s5p_mfc_handle_frame_new(struct
> s5p_mfc_ctx *ctx, unsigned int err)
>  	unsigned int frame_type;
> 
>  	dspl_y_addr = s5p_mfc_hw_call(dev->mfc_ops, get_dspl_y_adr, dev);
> -	frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_disp_frame_type,
> ctx);
> +	if (IS_MFCV6_PLUS(dev))
> +		frame_type = s5p_mfc_hw_call(dev->mfc_ops,
> +			get_disp_frame_type, ctx);
> +	else
> +		frame_type = s5p_mfc_hw_call(dev->mfc_ops,
> +			get_dec_frame_type, dev);
> 
>  	/* If frame is same as previous then skip and do not dequeue */
>  	if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) {
> --
> 2.1.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html