mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Henning Schild <henning.schild@siemens.com>,
	Mark Gross <markgross@kernel.org>,
	linux-kernel@vger.kernel.org,
	platform-driver-x86@vger.kernel.org,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Jean Delvare <jdelvare@suse.com>,
	linux-watchdog@vger.kernel.org, linux-hwmon@vger.kernel.org,
	Tobias Schaffner <tobias.schaffner@siemens.com>,
	Gerd Haeussler <gerd.haeussler.ext@siemens.com>
Subject: Re: [PATCH 1/2] watchdog: simatic-ipc-wdt: make IO region access of one model muxed
Date: Mon, 10 Jul 2023 06:45:14 -0700	[thread overview]
Message-ID: <087368d7-15d6-45e2-bd1e-5955bf81d206@roeck-us.net> (raw)
In-Reply-To: <4a11393d-69bb-8e9d-3bfe-21aa7a7fb1e3@redhat.com>

On Mon, Jul 10, 2023 at 03:33:45PM +0200, Hans de Goede wrote:
> Hi Guenter,
> 
> On 7/6/23 18:03, Guenter Roeck wrote:
> > On 7/6/23 08:48, Henning Schild wrote:
> >> The IO region used for the watchdog also hold CMOS battery monitoring
> >> information. Make the access muxed so that a hwmon driver can use the
> >> region as well.
> >>
> >> Signed-off-by: Henning Schild <henning.schild@siemens.com>
> > 
> > Acked-by: Guenter Roeck <linux@roeck-us.net>
> 
> Thank you. Is it ok if I pick up his patch and merge it together with 2/2
> through the pdx86 tree ?
> 

Yes. That was my assumption.

Guenter

> Regards,
> 
> Hans
> 
> 
> > 
> >> ---
> >>   drivers/watchdog/simatic-ipc-wdt.c | 9 ++++++---
> >>   1 file changed, 6 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/watchdog/simatic-ipc-wdt.c b/drivers/watchdog/simatic-ipc-wdt.c
> >> index 6599695dc672..cdc1a2e15180 100644
> >> --- a/drivers/watchdog/simatic-ipc-wdt.c
> >> +++ b/drivers/watchdog/simatic-ipc-wdt.c
> >> @@ -155,9 +155,8 @@ static int simatic_ipc_wdt_probe(struct platform_device *pdev)
> >>         switch (plat->devmode) {
> >>       case SIMATIC_IPC_DEVICE_227E:
> >> -        if (!devm_request_region(dev, gp_status_reg_227e_res.start,
> >> -                     resource_size(&gp_status_reg_227e_res),
> >> -                     KBUILD_MODNAME)) {
> >> +        res = &gp_status_reg_227e_res;
> >> +        if (!request_muxed_region(res->start, resource_size(res), res->name)) {
> >>               dev_err(dev,
> >>                   "Unable to register IO resource at %pR\n",
> >>                   &gp_status_reg_227e_res);
> >> @@ -210,6 +209,10 @@ static int simatic_ipc_wdt_probe(struct platform_device *pdev)
> >>       if (wdd_data.bootstatus)
> >>           dev_warn(dev, "last reboot caused by watchdog reset\n");
> >>   +    if (plat->devmode == SIMATIC_IPC_DEVICE_227E)
> >> +        release_region(gp_status_reg_227e_res.start,
> >> +                   resource_size(&gp_status_reg_227e_res));
> >> +
> >>       watchdog_set_nowayout(&wdd_data, nowayout);
> >>       watchdog_stop_on_reboot(&wdd_data);
> >>       return devm_watchdog_register_device(dev, &wdd_data);
> > 
> 

  reply	other threads:[~2023-07-10 13:45 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-06 15:48 [PATCH 0/2] platform/x86: add CMOS battery monitoring for simatic IPCs Henning Schild
2023-07-06 15:48 ` [PATCH 1/2] watchdog: simatic-ipc-wdt: make IO region access of one model muxed Henning Schild
2023-07-06 16:03   ` Guenter Roeck
2023-07-10 13:33     ` Hans de Goede
2023-07-10 13:45       ` Guenter Roeck [this message]
2023-07-10 18:54         ` Henning Schild
2023-07-06 15:48 ` [PATCH 2/2] platform/x86: add CMOS battery monitoring for simatic IPCs Henning Schild
2023-07-10 13:34   ` Hans de Goede
2023-07-12 18:02   ` Hans de Goede
2023-07-12 18:05   ` Hans de Goede
2023-07-13  8:28     ` Henning Schild
2023-07-13  8:36       ` Hans de Goede
2023-07-13 11:59     ` Henning Schild
2023-07-14  9:28 ` [PATCH 0/2] " Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=087368d7-15d6-45e2-bd1e-5955bf81d206@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=gerd.haeussler.ext@siemens.com \
    --cc=hdegoede@redhat.com \
    --cc=henning.schild@siemens.com \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=markgross@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=tobias.schaffner@siemens.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®