From: Andy Lutomirski <luto@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Cornelia Huck <cornelia.huck@de.ibm.com>,
Sebastian Ott <sebott@linux.vnet.ibm.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Christoph Hellwig <hch@lst.de>,
benh@kernel.crashing.org, KVM <kvm@vger.kernel.org>,
dwmw2@infradead.org, Martin Schwidefsky <schwidefsky@de.ibm.com>,
linux-s390 <linux-s390@vger.kernel.org>,
"Michael S. Tsirkin" <mst@redhat.com>,
virtualization@lists.linux-foundation.org,
Andy Lutomirski <luto@kernel.org>
Subject: [PATCH v3 3/3] virtio_pci: Use the DMA API
Date: Tue, 27 Oct 2015 23:39:00 -0700 [thread overview]
Message-ID: <08f11115dfc54ca55ef70acf11cc6ffc46f62a5e.1446014204.git.luto@kernel.org> (raw)
In-Reply-To: <cover.1446014204.git.luto@kernel.org>
In-Reply-To: <cover.1446014204.git.luto@kernel.org>
This fixes virtio-pci on platforms and busses that have IOMMUs. This
will break the experimental QEMU Q35 IOMMU support until QEMU is
fixed. In exchange, it fixes physical virtio hardware as well as
virtio-pci running under Xen.
We should clean up the virtqueue API to do its own allocation and
teach virtqueue_get_avail and virtqueue_get_used to return DMA
addresses directly.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
drivers/virtio/virtio_pci_common.h | 3 ++-
drivers/virtio/virtio_pci_legacy.c | 19 +++++++++++++++----
drivers/virtio/virtio_pci_modern.c | 34 ++++++++++++++++++++++++----------
3 files changed, 41 insertions(+), 15 deletions(-)
diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h
index b976d968e793..cd6196b513ad 100644
--- a/drivers/virtio/virtio_pci_common.h
+++ b/drivers/virtio/virtio_pci_common.h
@@ -38,8 +38,9 @@ struct virtio_pci_vq_info {
/* the number of entries in the queue */
int num;
- /* the virtual address of the ring queue */
+ /* the ring queue */
void *queue;
+ dma_addr_t queue_dma_addr; /* bus address */
/* the list node for the virtqueues list */
struct list_head node;
diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
index 48bc9797e530..b5293e5f2af4 100644
--- a/drivers/virtio/virtio_pci_legacy.c
+++ b/drivers/virtio/virtio_pci_legacy.c
@@ -135,12 +135,14 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev,
info->msix_vector = msix_vec;
size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
- info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
+ info->queue = dma_zalloc_coherent(&vp_dev->pci_dev->dev, size,
+ &info->queue_dma_addr,
+ GFP_KERNEL);
if (info->queue == NULL)
return ERR_PTR(-ENOMEM);
/* activate the queue */
- iowrite32(virt_to_phys(info->queue) >> VIRTIO_PCI_QUEUE_ADDR_SHIFT,
+ iowrite32(info->queue_dma_addr >> VIRTIO_PCI_QUEUE_ADDR_SHIFT,
vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
/* create the vring */
@@ -169,7 +171,8 @@ out_assign:
vring_del_virtqueue(vq);
out_activate_queue:
iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
- free_pages_exact(info->queue, size);
+ dma_free_coherent(&vp_dev->pci_dev->dev, size,
+ info->queue, info->queue_dma_addr);
return ERR_PTR(err);
}
@@ -194,7 +197,8 @@ static void del_vq(struct virtio_pci_vq_info *info)
iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
size = PAGE_ALIGN(vring_size(info->num, VIRTIO_PCI_VRING_ALIGN));
- free_pages_exact(info->queue, size);
+ dma_free_coherent(&vp_dev->pci_dev->dev, size,
+ info->queue, info->queue_dma_addr);
}
static const struct virtio_config_ops virtio_pci_config_ops = {
@@ -227,6 +231,13 @@ int virtio_pci_legacy_probe(struct virtio_pci_device *vp_dev)
return -ENODEV;
}
+ rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64));
+ if (rc)
+ rc = dma_set_mask_and_coherent(&pci_dev->dev,
+ DMA_BIT_MASK(32));
+ if (rc)
+ dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n");
+
rc = pci_request_region(pci_dev, 0, "virtio-pci-legacy");
if (rc)
return rc;
diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
index 8e5cf194cc0b..fbe0bd1c4881 100644
--- a/drivers/virtio/virtio_pci_modern.c
+++ b/drivers/virtio/virtio_pci_modern.c
@@ -293,14 +293,16 @@ static size_t vring_pci_size(u16 num)
return PAGE_ALIGN(vring_size(num, SMP_CACHE_BYTES));
}
-static void *alloc_virtqueue_pages(int *num)
+static void *alloc_virtqueue_pages(struct virtio_pci_device *vp_dev,
+ int *num, dma_addr_t *dma_addr)
{
void *pages;
/* TODO: allocate each queue chunk individually */
for (; *num && vring_pci_size(*num) > PAGE_SIZE; *num /= 2) {
- pages = alloc_pages_exact(vring_pci_size(*num),
- GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN);
+ pages = dma_zalloc_coherent(
+ &vp_dev->pci_dev->dev, vring_pci_size(*num),
+ dma_addr, GFP_KERNEL|__GFP_NOWARN);
if (pages)
return pages;
}
@@ -309,7 +311,9 @@ static void *alloc_virtqueue_pages(int *num)
return NULL;
/* Try to get a single page. You are my only hope! */
- return alloc_pages_exact(vring_pci_size(*num), GFP_KERNEL|__GFP_ZERO);
+ return dma_zalloc_coherent(
+ &vp_dev->pci_dev->dev, vring_pci_size(*num),
+ dma_addr, GFP_KERNEL);
}
static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev,
@@ -346,7 +350,8 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev,
info->num = num;
info->msix_vector = msix_vec;
- info->queue = alloc_virtqueue_pages(&info->num);
+ info->queue = alloc_virtqueue_pages(vp_dev, &info->num,
+ &info->queue_dma_addr);
if (info->queue == NULL)
return ERR_PTR(-ENOMEM);
@@ -361,11 +366,11 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev,
/* activate the queue */
vp_iowrite16(num, &cfg->queue_size);
- vp_iowrite64_twopart(virt_to_phys(info->queue),
+ vp_iowrite64_twopart(info->queue_dma_addr,
&cfg->queue_desc_lo, &cfg->queue_desc_hi);
- vp_iowrite64_twopart(virt_to_phys(virtqueue_get_avail(vq)),
+ vp_iowrite64_twopart(info->queue_dma_addr + ((char *)virtqueue_get_avail(vq) - (char *)info->queue),
&cfg->queue_avail_lo, &cfg->queue_avail_hi);
- vp_iowrite64_twopart(virt_to_phys(virtqueue_get_used(vq)),
+ vp_iowrite64_twopart(info->queue_dma_addr + ((char *)virtqueue_get_used(vq) - (char *)info->queue),
&cfg->queue_used_lo, &cfg->queue_used_hi);
if (vp_dev->notify_base) {
@@ -411,7 +416,8 @@ err_assign_vector:
err_map_notify:
vring_del_virtqueue(vq);
err_new_queue:
- free_pages_exact(info->queue, vring_pci_size(info->num));
+ dma_free_coherent(&vp_dev->pci_dev->dev, vring_pci_size(info->num),
+ info->queue, info->queue_dma_addr);
return ERR_PTR(err);
}
@@ -457,7 +463,8 @@ static void del_vq(struct virtio_pci_vq_info *info)
vring_del_virtqueue(vq);
- free_pages_exact(info->queue, vring_pci_size(info->num));
+ dma_free_coherent(&vp_dev->pci_dev->dev, vring_pci_size(info->num),
+ info->queue, info->queue_dma_addr);
}
static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
@@ -641,6 +648,13 @@ int virtio_pci_modern_probe(struct virtio_pci_device *vp_dev)
return -EINVAL;
}
+ err = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64));
+ if (err)
+ err = dma_set_mask_and_coherent(&pci_dev->dev,
+ DMA_BIT_MASK(32));
+ if (err)
+ dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n");
+
/* Device capability is only mandatory for devices that have
* device-specific configuration.
*/
--
2.4.3
next prev parent reply other threads:[~2015-10-28 6:40 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-28 6:38 [PATCH v3 0/3] virtio DMA API core stuff Andy Lutomirski
2015-10-28 6:38 ` [PATCH v3 1/3] virtio_net: Stop doing DMA from the stack Andy Lutomirski
2015-10-28 7:08 ` Michael S. Tsirkin
2015-10-28 6:38 ` [PATCH v3 2/3] virtio_ring: Support DMA APIs Andy Lutomirski
2015-10-28 6:39 ` Andy Lutomirski [this message]
2015-10-28 6:53 ` [PATCH v3 0/3] virtio DMA API core stuff David Woodhouse
2015-10-28 7:09 ` Andy Lutomirski
2015-10-28 7:17 ` Michael S. Tsirkin
2015-10-28 7:40 ` Christian Borntraeger
2015-10-28 8:09 ` David Woodhouse
2015-10-28 11:35 ` Michael S. Tsirkin
2015-10-28 13:35 ` David Woodhouse
2015-10-28 14:05 ` Michael S. Tsirkin
2015-10-28 14:13 ` David Woodhouse
2015-10-28 14:22 ` Michael S. Tsirkin
2015-10-28 14:32 ` David Woodhouse
2015-10-28 16:12 ` Michael S. Tsirkin
2015-10-28 22:51 ` Andy Lutomirski
2015-10-29 9:01 ` Michael S. Tsirkin
2015-10-29 16:18 ` David Woodhouse
2015-11-08 10:37 ` Michael S. Tsirkin
2015-11-08 11:49 ` Joerg Roedel
2015-11-10 15:02 ` Michael S. Tsirkin
2015-11-10 18:54 ` Andy Lutomirski
2015-11-11 10:05 ` Michael S. Tsirkin
2015-11-11 15:56 ` Andy Lutomirski
2015-11-11 22:30 ` David Woodhouse
2015-11-12 11:09 ` Michael S. Tsirkin
2015-11-12 12:18 ` David Woodhouse
2015-11-22 13:06 ` Marcel Apfelbaum
2015-11-22 15:54 ` David Woodhouse
2015-11-22 17:04 ` Marcel Apfelbaum
2015-11-22 22:11 ` Michael S. Tsirkin
2015-11-08 12:00 ` David Woodhouse
2015-10-30 15:16 ` Joerg Roedel
2015-11-11 9:11 ` Michael S. Tsirkin
2015-10-30 16:54 ` David Woodhouse
2015-11-03 10:24 ` Paolo Bonzini
2015-10-28 8:36 ` Benjamin Herrenschmidt
2015-10-28 11:23 ` Michael S. Tsirkin
2015-10-28 13:37 ` David Woodhouse
2015-10-28 14:07 ` Michael S. Tsirkin
2015-11-19 13:45 ` Michael S. Tsirkin
2015-11-19 21:59 ` Andy Lutomirski
2015-11-19 23:38 ` David Woodhouse
2015-11-20 2:56 ` Benjamin Herrenschmidt
2015-11-20 8:34 ` Michael S. Tsirkin
2015-11-20 8:21 ` Michael S. Tsirkin
2015-11-22 15:58 ` David Woodhouse
2015-11-22 21:52 ` Michael S. Tsirkin
2015-11-22 22:21 ` David Woodhouse
2015-11-23 7:56 ` Michael S. Tsirkin
2015-11-22 22:21 ` David Woodhouse
2015-11-20 6:56 ` Michael S. Tsirkin
2015-11-20 7:47 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=08f11115dfc54ca55ef70acf11cc6ffc46f62a5e.1446014204.git.luto@kernel.org \
--to=luto@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=borntraeger@de.ibm.com \
--cc=cornelia.huck@de.ibm.com \
--cc=dwmw2@infradead.org \
--cc=hch@lst.de \
--cc=jroedel@suse.de \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=schwidefsky@de.ibm.com \
--cc=sebott@linux.vnet.ibm.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®