From: "Aithal, Srikanth" <Srikanth.Aithal@amd.com>
To: Ashish Kalra <Ashish.Kalra@amd.com>, <tglx@kernel.org>,
<mingo@redhat.com>, <bp@alien8.de>, <dave.hansen@linux.intel.com>,
<x86@kernel.org>, <hpa@zytor.com>, <thomas.lendacky@amd.com>,
<nikunj@amd.com>
Cc: <kvm@vger.kernel.org>, <linux-coco@lists.linux.dev>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] x86/sev: Skip DR7 write during kexec when it would trigger an unserviceable #VC
Date: Tue, 17 Nov 2026 12:40:46 +0530 [thread overview]
Message-ID: <09c667a7-f5b7-42ff-aca9-838495738d3d@amd.com> (raw)
In-Reply-To: <20261116230335.1161521-1-Ashish.Kalra@amd.com>
On 11/17/2026 4:33 AM, Ashish Kalra wrote:
> From: Ashish Kalra <ashish.kalra@amd.com>
>
> machine_kexec() calls hw_breakpoint_disable(), which writes DR7. On
> SEV-ES/SNP guests that do not have DebugSwap enabled, DR7 accesses are
> intercepted and delivered to the guest as a #VC exception, which must be
> serviced through the GHCB.
>
> By the time machine_kexec() runs, snp_kexec_finish() (called from
> native_machine_shutdown()) has already converted the per-CPU GHCBs and
> the boot GHCB back to private and set boot_ghcb to NULL, tearing down the
> GHCB infrastructure. The DR7 write therefore raises a #VC that
> dereferences a NULL GHCB pointer, causing a page fault and the kexec to
> fail.
>
> The NULL boot_ghcb pointer is a result of commit 3645eb7e3915 ("x86/fred:
> Fix early boot failures on SEV-ES/SNP guests"): that change makes
> __sev_get_ghcb() return the now-NULL boot_ghcb in this window, turning
> the previously-benign teardown-window #VC (a bogus VMGEXIT the host
> rejected but survived) into a NULL dereference.
>
> Skip the DR7 write once the GHCBs have been torn down; the kexec'ed
> kernel re-initializes DR7.
>
> Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
> Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
> Cc: stable@vger.kernel.org
> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
> ---
> v2:
> - Move the check into hw_breakpoint_disable() through a new
> snp_hw_breakpoint_disable() helper, so the SNP-specific logic lives in
> SEV code (Borislav Petkov).
> - Drop CC_ATTR_GUEST_DEBUG_VIRT and read DebugSwap from sev_status.
> - Skip only once the GHCBs have been torn down, so use_temporary_mm()
> keeps disabling breakpoints at runtime.
> - Trim the commit message (Borislav Petkov).
>
> arch/x86/coco/sev/core.c | 16 ++++++++++++++++
> arch/x86/include/asm/debugreg.h | 4 ++++
> arch/x86/include/asm/sev.h | 2 ++
> 3 files changed, 22 insertions(+)
>
> diff --git a/arch/x86/coco/sev/core.c b/arch/x86/coco/sev/core.c
> index eb2e853e950a..64a5a037a9c8 100644
> --- a/arch/x86/coco/sev/core.c
> +++ b/arch/x86/coco/sev/core.c
> @@ -723,6 +723,22 @@ void snp_kexec_finish(void)
> }
> }
>
> +/*
> + * Without DebugSwap, a DR7 write raises a #VC, which can no longer be serviced
> + * once snp_kexec_finish() has torn down the GHCBs. The kexec'ed kernel
> + * re-initializes DR7, so skip the write in that case.
> + */
> +bool snp_hw_breakpoint_disable(void)
> +{
> + if (!cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT))
> + return false;
> +
> + if (sev_status & MSR_AMD64_SNP_DEBUG_SWAP)
> + return false;
> +
> + return !sev_cfg.ghcbs_initialized;
> +}
> +
> #define __ATTR_BASE (SVM_SELECTOR_P_MASK | SVM_SELECTOR_S_MASK)
> #define INIT_CS_ATTRIBS (__ATTR_BASE | SVM_SELECTOR_READ_MASK | SVM_SELECTOR_CODE_MASK)
> #define INIT_DS_ATTRIBS (__ATTR_BASE | SVM_SELECTOR_WRITE_MASK)
> diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
> index 854d82b88ff4..af15e2c928db 100644
> --- a/arch/x86/include/asm/debugreg.h
> +++ b/arch/x86/include/asm/debugreg.h
> @@ -8,6 +8,7 @@
>
> #include <asm/cpufeature.h>
> #include <asm/msr.h>
> +#include <asm/sev.h>
>
> /*
> * Define bits that are always set to 1 in DR7, only bit 10 is
> @@ -108,6 +109,9 @@ static __always_inline void native_set_debugreg(int regno, unsigned long value)
>
> static inline void hw_breakpoint_disable(void)
> {
> + if (snp_hw_breakpoint_disable())
> + return;
> +
> /* Reset the control register for HW Breakpoint */
> set_debugreg(DR7_FIXED_1, 7);
>
> diff --git a/arch/x86/include/asm/sev.h b/arch/x86/include/asm/sev.h
> index c7ea9845351e..f38bb521987d 100644
> --- a/arch/x86/include/asm/sev.h
> +++ b/arch/x86/include/asm/sev.h
> @@ -522,6 +522,7 @@ int prepare_pte_enc(struct pte_enc_desc *d);
> void set_pte_enc_mask(pte_t *kpte, unsigned long pfn, pgprot_t new_prot);
> void snp_kexec_finish(void);
> void snp_kexec_begin(void);
> +bool snp_hw_breakpoint_disable(void);
>
> int snp_msg_init(struct snp_msg_desc *mdesc, int vmpck_id);
> struct snp_msg_desc *snp_msg_alloc(void);
> @@ -632,6 +633,7 @@ static inline int prepare_pte_enc(struct pte_enc_desc *d) { return 0; }
> static inline void set_pte_enc_mask(pte_t *kpte, unsigned long pfn, pgprot_t new_prot) { }
> static inline void snp_kexec_finish(void) { }
> static inline void snp_kexec_begin(void) { }
> +static inline bool snp_hw_breakpoint_disable(void) { return false; }
> static inline int snp_msg_init(struct snp_msg_desc *mdesc, int vmpck_id) { return -1; }
> static inline struct snp_msg_desc *snp_msg_alloc(void) { return NULL; }
> static inline void snp_msg_free(struct snp_msg_desc *mdesc) { }
>
> base-commit: 9f74092fda91ef93c2b07585785c1dc83cd7971f
Tested v2 on top of 7.4.0-rc3[aebb727]; kexec works fine with this patch.
Reported-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Tested-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
prev parent reply other threads:[~2026-11-17 7:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 23:03 Ashish Kalra
2026-11-17 7:10 ` Aithal, Srikanth [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=09c667a7-f5b7-42ff-aca9-838495738d3d@amd.com \
--to=srikanth.aithal@amd.com \
--cc=Ashish.Kalra@amd.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=nikunj@amd.com \
--cc=tglx@kernel.org \
--cc=thomas.lendacky@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®