From: Joao Pinto <Joao.Pinto@synopsys.com>
To: vinholikatti@gmail.com, julian.calaby@gmail.com,
akinobu.mita@gmail.com, hch@infradead.org, arnd@arndb.de,
mark.rutland@arm.com
Cc: gbroner@codeaurora.org, subhashj@codeaurora.org,
CARLOS.PALMINHA@synopsys.com, ijc+devicetree@hellion.org.uk,
linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
devicetree@vger.kernel.org, Joao Pinto <Joao.Pinto@synopsys.com>
Subject: [PATCH v11 5/6] add TC G210 platform driver
Date: Mon, 7 Mar 2016 12:09:20 +0000 [thread overview]
Message-ID: <09d60ef0a991150a2eba77f627f292f3c2c827fd.1457352207.git.jpinto@synopsys.com> (raw)
In-Reply-To: <cover.1457111366.git.jpinto@synopsys.com>
In-Reply-To: <f12dcbcb9b83881a5f71460e2d6e1ab0f1e326d8.1457352207.git.jpinto@synopsys.com>
This patch adds a glue platform driver for the Synopsys G210 Test Chip.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v10->v11 (Arnd Bergmann):
- vops structs are now passed in .data
Changes v0->v10:
- This patch only appeared in v10
.../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt | 26 +++++
drivers/scsi/ufs/Kconfig | 9 ++
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/tc-dwc-g210-pltfrm.c | 113 +++++++++++++++++++++
4 files changed, 149 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
diff --git a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
new file mode 100644
index 0000000..6ec9647
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
@@ -0,0 +1,26 @@
+* Universal Flash Storage (UFS) DesignWare Host Controller
+
+DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible : compatible list must contain the PHY type & version:
+ "snps, g210-tc-6.00-20bit"
+ "snps, g210-tc-6.00-40bit"
+ complemented with the Controller IP version:
+ "snps, dwc-ufshcd-1.40a"
+ complemented with the JEDEC version:
+ "jedec,ufs-1.1"
+ "jedec,ufs-2.0"
+
+- reg : <registers mapping>
+- interrupts : <interrupt mapping for UFS host controller IRQ>
+
+Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
+ dwc_ufs@d0000000 {
+ compatible = "snps, g210-tc-6.00-40bit",
+ "snps, dwc-ufshcd-1.40a",
+ "jedec,ufs-2.0";
+ reg = < 0xd0000000 0x10000 >;
+ interrupts = < 24 >;
+ };
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 9d218f9..5cfa87b 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -90,3 +90,12 @@ config SCSI_UFS_DWC
config SCSI_UFS_DWC_TC
bool
select SCSI_UFS_DWC
+
+config SCSI_UFS_DWC_TC_PLATFORM
+ tristate "DesignWare platform support using a G210 Test Chip"
+ depends on SCSI_UFSHCD_PLATFORM
+ select SCSI_UFS_DWC_TC
+ ---help---
+ Synopsys Test Chip is a PHY for prototyping purposes.
+
+ If unsure, say N."
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 9468d7b..a977fe0 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,6 +1,7 @@
# UFSHCD makefile
obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o
+obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c b/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
new file mode 100644
index 0000000..9bffb98
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
@@ -0,0 +1,113 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+
+#include "ufshcd-pltfrm.h"
+#include "ufshcd-dwc.h"
+#include "tc-dwc-g210.h"
+
+/**
+ * UFS DWC specific variant operations
+ */
+static struct ufs_hba_variant_ops tc_dwc_g210_20bit_pltfm_hba_vops = {
+ .name = "tc-dwc-g210-pltfm",
+ .link_startup_notify = ufshcd_dwc_link_startup_notify,
+ .custom_phy_initialization = tc_dwc_g210_config_20_bit,
+};
+
+static struct ufs_hba_variant_ops tc_dwc_g210_40bit_pltfm_hba_vops = {
+ .name = "tc-dwc-g210-pltfm",
+ .link_startup_notify = ufshcd_dwc_link_startup_notify,
+ .custom_phy_initialization = tc_dwc_g210_config_40_bit,
+};
+
+static const struct of_device_id tc_dwc_g210_pltfm_match[] = {
+ {
+ .compatible = "snps, g210-tc-6.00-20bit",
+ .data = &tc_dwc_g210_20bit_pltfm_hba_vops,
+ },
+ {
+ .compatible = "snps, g210-tc-6.00-40bit",
+ .data = &tc_dwc_g210_40bit_pltfm_hba_vops,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tc_dwc_g210_pltfm_match);
+
+/**
+ * tc_dwc_g210_pltfm_probe()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int tc_dwc_g210_pltfm_probe(struct platform_device *pdev)
+{
+ int err;
+ const struct of_device_id *of_id;
+ struct ufs_hba_variant_ops *vops;
+ struct device *dev = &pdev->dev;
+
+ of_id = of_match_node(tc_dwc_g210_pltfm_match, dev->of_node);
+ vops = (struct ufs_hba_variant_ops *)of_id->data;
+
+ /* Perform generic probe */
+ err = ufshcd_pltfrm_init(pdev, vops);
+ if (err)
+ dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+ return err;
+}
+
+/**
+ * tc_dwc_g210_pltfm_remove()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int tc_dwc_g210_pltfm_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&(pdev)->dev);
+ ufshcd_remove(hba);
+
+ return 0;
+}
+
+static const struct dev_pm_ops tc_dwc_g210_pltfm_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver tc_dwc_g210_pltfm_driver = {
+ .probe = tc_dwc_g210_pltfm_probe,
+ .remove = tc_dwc_g210_pltfm_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "tc-dwc-g210-pltfm",
+ .pm = &tc_dwc_g210_pltfm_pm_ops,
+ .of_match_table = of_match_ptr(tc_dwc_g210_pltfm_match),
+ },
+};
+
+module_platform_driver(tc_dwc_g210_pltfm_driver);
+
+MODULE_ALIAS("platform:tc-dwc-g210-pltfm");
+MODULE_DESCRIPTION("Synopsys Test Chip G210 platform glue driver");
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
+MODULE_LICENSE("Dual BSD/GPL");
--
1.8.1.5
next prev parent reply other threads:[~2016-03-07 12:10 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-04 17:22 [PATCH v10 0/6] add support for DWC UFS Controller Joao Pinto
2016-03-04 17:22 ` [PATCH v10 1/6] fixed typo in ufshcd-pltfrm Joao Pinto
2016-03-04 21:21 ` Arnd Bergmann
2016-03-04 17:22 ` [PATCH v10 2/6] added UFS 2.0 capabilities Joao Pinto
2016-03-04 21:08 ` Arnd Bergmann
2016-03-17 11:52 ` Rob Herring
2016-03-17 12:49 ` [RESEND] [PATCH v11 " Rob Herring
2016-03-29 10:41 ` Winkler, Tomas
2016-03-29 11:08 ` Joao Pinto
2016-03-29 11:33 ` Winkler, Tomas
2016-03-29 11:53 ` Joao Pinto
2016-03-04 17:22 ` [PATCH v10 3/6] added support for DesignWare Controller Joao Pinto
2016-03-04 21:09 ` Arnd Bergmann
2016-03-29 12:15 ` [RESEND] [PATCH v11 " Winkler, Tomas
2016-03-30 9:54 ` Joao Pinto
2016-03-04 17:22 ` [PATCH v10 4/6] added support for Synopsys G210 Test Chip Joao Pinto
2016-03-04 21:10 ` Arnd Bergmann
2016-03-04 17:22 ` [PATCH v10 5/6] add TC G210 platform driver Joao Pinto
2016-03-04 21:12 ` Arnd Bergmann
2016-03-07 10:02 ` Joao Pinto
2016-03-04 17:22 ` [PATCH v10 6/6] add TC G210 pci driver Joao Pinto
2016-03-04 21:17 ` Arnd Bergmann
2016-03-07 11:03 ` Joao Pinto
[not found] ` <f12dcbcb9b83881a5f71460e2d6e1ab0f1e326d8.1457352207.git.jpinto@synopsys.com>
2016-03-07 12:09 ` Joao Pinto [this message]
2016-03-17 14:55 ` [PATCH v11 5/6] add TC G210 platform driver Rob Herring
2016-03-07 12:09 ` [PATCH v11 6/6] add-TC-G210-pci-driver Joao Pinto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=09d60ef0a991150a2eba77f627f292f3c2c827fd.1457352207.git.jpinto@synopsys.com \
--to=joao.pinto@synopsys.com \
--cc=CARLOS.PALMINHA@synopsys.com \
--cc=akinobu.mita@gmail.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=gbroner@codeaurora.org \
--cc=hch@infradead.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=julian.calaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=subhashj@codeaurora.org \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®