From: "Sverdlin, Alexander" <alexander.sverdlin@siemens.com>
To: "lee@kernel.org" <lee@kernel.org>,
"tony@atomide.com" <tony@atomide.com>,
"jneanne@baylibre.com" <jneanne@baylibre.com>
Cc: "nm@ti.com" <nm@ti.com>, "msp@baylibre.com" <msp@baylibre.com>,
"afd@ti.com" <afd@ti.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"khilman@baylibre.com" <khilman@baylibre.com>
Subject: Re: [RESEND PATCH v3] mfd: tps65219: Add support for soft shutdown via sys-off API
Date: Fri, 15 Nov 2024 10:03:08 +0000 [thread overview]
Message-ID: <0a0faa2b1f9ee02d86823ba0fe9faab7577ac426.camel@siemens.com> (raw)
In-Reply-To: <cf051fe221d0d455b3d45c5610e1e31fea560c47.camel@siemens.com>
Hello all,
and sorry for spam,
On Fri, 2024-11-15 at 09:15 +0100, Alexander Sverdlin wrote:
> > Use new API for power-off mode support:
> > Link: https://lwn.net/Articles/894511/
> > Link: https://lore.kernel.org/all/7hfseqa7l0.fsf@baylibre.com/
> >
> > sys-off API allows support of shutdown handler and restart handler.
> >
> > Shutdown was not supported before that enhancement.
> > This is required for platform that are not using PSCI.
> >
> > Test:
> > - restart:
> > # reboot
> > Default is cold reset:
> > # cat /sys/kernel/reboot/mode
> > Switch boot mode to warm reset:
> > # echo warm > /sys/kernel/reboot/mode
> > - power-off:
> > # halt
> >
> > Tested on AM62-LP-SK board.
> >
> > Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
> > Suggested-by: Andrew Davis <afd@ti.com>
> > Reviewed-by: Andrew Davis <afd@ti.com>
> > ---
> >
> > Notes:
> > Change-log v3 to v2
> > v2: Link: https://lore.kernel.org/lkml/20230511122100.2225417-1-jneanne@baylibre.com/
> > Lee Jones Review:
> > nits: rm not needed line wraps and restore a cr deleted not related with the patch.
> >
> > Change-log v2 to v1
> > v1: Link: https://lore.kernel.org/all/20230203140150.13071-1-jneanne@baylibre.com/
> > Andrew Davis Review:
> > - Use new helpers devm_register_restart_handler and devm_register_power_off_handler
> > Vignesh Raghavendra:
> > - Fix typo on board name in commit message
> >
> > drivers/mfd/tps65219.c | 38 ++++++++++++++++++++++++++++----------
> > 1 file changed, 28 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/mfd/tps65219.c b/drivers/mfd/tps65219.c
> > index 0e402fda206b..3d9164491e20 100644
> > --- a/drivers/mfd/tps65219.c
> > +++ b/drivers/mfd/tps65219.c
> > @@ -25,13 +25,21 @@ static int tps65219_cold_reset(struct tps65219 *tps)
> > TPS65219_MFP_COLD_RESET_I2C_CTRL_MASK);
> > }
> >
> > -static int tps65219_restart(struct notifier_block *this,
> > - unsigned long reboot_mode, void *cmd)
> > +static int tps65219_soft_shutdown(struct tps65219 *tps)
> > {
> > - struct tps65219 *tps;
> > + return regmap_update_bits(tps->regmap, TPS65219_REG_MFP_CTRL,
> > + TPS65219_MFP_I2C_OFF_REQ_MASK,
> > + TPS65219_MFP_I2C_OFF_REQ_MASK);
>
> I suppose this is I2C access and is therefore a [potentially] sleeping call?
> Could this be an issue, see below...
I totally missed master_xfer_atomic = omap_i2c_xfer_polling in i2c-omap.c!
No issues here, I'm sorry!
> > +}
> >
> > - tps = container_of(this, struct tps65219, nb);
> > +static int tps65219_power_off_handler(struct sys_off_data *data)
> > +{
> > + tps65219_soft_shutdown(data->cb_data);
> > + return NOTIFY_DONE;
> > +}
> >
> > +static int tps65219_restart(struct tps65219 *tps, unsigned long reboot_mode)
> > +{
> > if (reboot_mode == REBOOT_WARM)
> > tps65219_warm_reset(tps);
> > else
> > @@ -40,10 +48,11 @@ static int tps65219_restart(struct notifier_block *this,
> > return NOTIFY_DONE;
> > }
> >
> > -static struct notifier_block pmic_rst_restart_nb = {
> > - .notifier_call = tps65219_restart,
> > - .priority = 200,
> > -};
> > +static int tps65219_restart_handler(struct sys_off_data *data)
> > +{
> > + tps65219_restart(data->cb_data, data->mode);
> > + return NOTIFY_DONE;
> > +}
> >
> > static const struct resource tps65219_pwrbutton_resources[] = {
> > DEFINE_RES_IRQ_NAMED(TPS65219_INT_PB_FALLING_EDGE_DETECT, "falling"),
> > @@ -269,13 +278,22 @@ static int tps65219_probe(struct i2c_client *client)
> > }
> > }
> >
> > - tps->nb = pmic_rst_restart_nb;
> > - ret = register_restart_handler(&tps->nb);
> > + ret = devm_register_restart_handler(tps->dev,
> > + tps65219_restart_handler,
> > + tps);
> > +
> > if (ret) {
> > dev_err(tps->dev, "cannot register restart handler, %d\n", ret);
> > return ret;
> > }
> >
> > + ret = devm_register_power_off_handler(tps->dev,
> > + tps65219_power_off_handler,
> > + tps);
>
> ... while this translates to
> return devm_register_sys_off_handler(dev,
> SYS_OFF_MODE_POWER_OFF,
> ... might this be an issue?
>
> enum sys_off_mode {
>
> []
> /**
> * @SYS_OFF_MODE_POWER_OFF:
> *
> * Handlers power-off system. Handlers are disallowed to sleep.
> */
> SYS_OFF_MODE_POWER_OFF,
>
>
> > + if (ret) {
> > + dev_err(tps->dev, "failed to register power-off handler: %d\n", ret);
> > + return ret;
> > + }
> > return 0;
> > }
>
--
Alexander Sverdlin
Siemens AG
www.siemens.com
prev parent reply other threads:[~2024-11-15 10:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-08 7:19 Jerome Neanne
2023-06-08 15:57 ` Lee Jones
2024-11-15 8:15 ` Sverdlin, Alexander
2024-11-15 10:03 ` Sverdlin, Alexander [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0a0faa2b1f9ee02d86823ba0fe9faab7577ac426.camel@siemens.com \
--to=alexander.sverdlin@siemens.com \
--cc=afd@ti.com \
--cc=jneanne@baylibre.com \
--cc=khilman@baylibre.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=msp@baylibre.com \
--cc=nm@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®