From: Adrian Hunter <adrian.hunter@intel.com>
To: Prathamesh Shete <pshete@nvidia.com>,
ulf.hansson@linaro.org, thierry.reding@gmail.com,
jonathanh@nvidia.com, p.zabel@pengutronix.de,
linux-mmc@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: anrao@nvidia.com
Subject: Re: [PATCH] mmc: sdhci-tegra: Add support to enumerate in HS400ES mode
Date: Thu, 2 Dec 2021 08:39:36 +0200 [thread overview]
Message-ID: <0a8368f9-8ca2-f01b-2f9e-0c91e3b946f5@intel.com> (raw)
In-Reply-To: <20211129111047.5299-1-pshete@nvidia.com>
On 29/11/2021 13:10, Prathamesh Shete wrote:
> When CMD13 is sent after switching to HS400 mode, the bus
> is operating at either MMC_HIGH_26_MAX_DTR or MMC_HIGH_52_MAX_DTR.
> To meet Tegra SDHCI requirement at HS400 mode, force SDHCI
> interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host
> controller CAR clock and the interface clock are rate matched.
This sounds like an issue with or without enhanced strobe?
Also it seems more like a fix than "adding support".
i.e. is this really "mmc: sdhci-tegra: Fix switch to HS400ES mode" ?
>
> Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
> ---
> drivers/mmc/host/sdhci-tegra.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index 387ce9cdbd7c..d800396d1112 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -123,6 +123,8 @@
> SDHCI_TRNS_BLK_CNT_EN | \
> SDHCI_TRNS_DMA)
>
> +static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
Please move one of the functions so that the forward declaration is not necessary.
> +
> struct sdhci_tegra_soc_data {
> const struct sdhci_pltfm_data *pdata;
> u64 dma_mask;
> @@ -369,6 +371,16 @@ static void tegra_sdhci_hs400_enhanced_strobe(struct mmc_host *mmc,
>
> sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
>
> + /*
> + * When CMD13 is sent after switching to HS400 mode, the bus
> + * is operating at either MMC_HIGH_26_MAX_DTR or
> + * MMC_HIGH_52_MAX_DTR.
> + * To meet Tegra SDHCI requirement at HS400 mode, force SDHCI
> + * interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host
> + * controller CAR clock and the interface clock are rate matched.
> + */
> + tegra_sdhci_set_clock(host, MMC_HS200_MAX_DTR);
This being done irrespective of ios->enhanced_strobe, which doesn't seem
right based on the comment?
> +
Please remove the blank line.
> }
>
> static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
>
next prev parent reply other threads:[~2021-12-02 6:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-29 11:10 Prathamesh Shete
2021-12-02 6:39 ` Adrian Hunter [this message]
2021-12-02 13:49 ` [PATCH v2] mmc: sdhci-tegra: Fix switch to " Prathamesh Shete
2021-12-02 14:35 ` Adrian Hunter
2021-12-06 14:05 ` [PATCH v3] " Prathamesh Shete
2021-12-14 6:01 ` Adrian Hunter
2021-12-14 11:36 ` [PATCH v4] " Prathamesh Shete
2021-12-14 12:06 ` Adrian Hunter
2021-12-14 20:37 ` Ulf Hansson
2021-12-14 11:38 ` [PATCH v3] " Prathamesh Shete
2021-12-06 14:06 ` [PATCH v2] " Prathamesh Shete
2021-12-02 13:50 ` [PATCH] mmc: sdhci-tegra: Add support to enumerate in " Prathamesh Shete
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0a8368f9-8ca2-f01b-2f9e-0c91e3b946f5@intel.com \
--to=adrian.hunter@intel.com \
--cc=anrao@nvidia.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pshete@nvidia.com \
--cc=thierry.reding@gmail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®