Re: [PATCH v12 06/10] hwmon: sy7636a: Add temperature driver for sy7636a

[Guenter Roeck <linux@roeck-us.net>]

On 10/9/21 4:50 AM, Alistair Francis wrote:
> This is a multi-function device to interface with the sy7636a
> EPD PMIC chip from Silergy.
> 
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
>   arch/arm/configs/imx_v6_v7_defconfig |  1 +

That should be a separate patch.

>   drivers/hwmon/Kconfig                | 10 ++++
>   drivers/hwmon/Makefile               |  1 +
>   drivers/hwmon/sy7636a-hwmon.c        | 77 ++++++++++++++++++++++++++++

Documentation/hwmon/sy7636a-hwmon is missing.

>   4 files changed, 89 insertions(+)
>   create mode 100644 drivers/hwmon/sy7636a-hwmon.c
> 
> diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> index 8a54a4d0181a..b87adf823e44 100644
> --- a/arch/arm/configs/imx_v6_v7_defconfig
> +++ b/arch/arm/configs/imx_v6_v7_defconfig
> @@ -228,6 +228,7 @@ CONFIG_RN5T618_POWER=m
>   CONFIG_SENSORS_MC13783_ADC=y
>   CONFIG_SENSORS_GPIO_FAN=y
>   CONFIG_SENSORS_IIO_HWMON=y
> +CONFIG_SENSORS_SY7636A=y
>   CONFIG_THERMAL_STATISTICS=y
>   CONFIG_THERMAL_WRITABLE_TRIPS=y
>   CONFIG_CPU_THERMAL=y
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index c4578e8f34bb..59f358293202 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1651,6 +1651,16 @@ config SENSORS_SIS5595
>   	  This driver can also be built as a module. If so, the module
>   	  will be called sis5595.
>   
> +config SENSORS_SY7636A
> +	tristate "Silergy SY7636A"
> +	depends on I2C

That is an arbitrary dependency. The driver doesn't use I2C.

> +	help
> +	  If you say yes here you get support for the thermistor readout of
> +	  the Silergy SY7636A PMIC.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called sy7636a-hwmon.
> +
>   config SENSORS_DME1737
>   	tristate "SMSC DME1737, SCH311x and compatibles"
>   	depends on I2C && !PPC
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 162940270661..1355ffdb1481 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -181,6 +181,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
>   obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
>   obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
>   obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
> +obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
>   obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
>   obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
>   obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
> diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c
> new file mode 100644
> index 000000000000..e0204278339b
> --- /dev/null
> +++ b/drivers/hwmon/sy7636a-hwmon.c
> @@ -0,0 +1,77 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Functions to access SY3686A power management chip temperature
> + *
> + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
> + *
> + * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
> + *          Alistair Francis <alistair@alistair23.me>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/jiffies.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/err.h>
> +#include <linux/sysfs.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/sy7636a.h>
> +
Alphabetic include file order please, and drop the includes which
are not needed (I don't see a need for slab.h or jiffies.h).

On the other side, the include of regmap.h is missing.

> +static ssize_t show_temp(struct device *dev,
> +	struct device_attribute *attr, char *buf)

If you use continuation lines, please align with "(".

> +{
> +	unsigned int reg_val;
> +	struct regmap *regmap = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = regmap_read(regmap,
> +			SY7636A_REG_TERMISTOR_READOUT, &reg_val);

Line length limit is now 100, so this continuation line should not be needed.

> +	if (ret)
> +		return ret;
> +
> +	return snprintf(buf, PAGE_SIZE, "%d\n", reg_val);
> +}
> +
> +static SENSOR_DEVICE_ATTR(temp0, 0444, show_temp, NULL, 0);
> +
> +static struct attribute *sy7636a_attrs[] = {
> +	&sensor_dev_attr_temp0.dev_attr.attr,

FWIW, there is no "temp0" in the hwmon ABI. Temperature sensor
numbering starts with 1. Not that it matters,
devm_hwmon_device_register_with_info() creates attributes internally.

> +	NULL
> +};
> +
> +ATTRIBUTE_GROUPS(sy7636a);
> +
> +static int sy7636a_sensor_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
> +	struct device *hwmon_dev;
> +	int err;
> +
> +	if (!regmap)
> +		return -EPROBE_DEFER;
> +
> +	hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
> +			"sy7636a_temperature", regmap, sy7636a_groups);
> +

Please use devm_hwmon_device_register_with_info().

> +	if (IS_ERR(hwmon_dev)) {
> +		err = PTR_ERR(hwmon_dev);
> +		dev_err(&pdev->dev, "Unable to register hwmon device, returned %d", err);

I dislike driver noise, but if it is retained please add "\n".

> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static struct platform_driver sy7636a_sensor_driver = {
> +	.probe = sy7636a_sensor_probe,
> +	.driver = {
> +		.name = "sy7636a-temperature",
> +	},
> +};
> +module_platform_driver(sy7636a_sensor_driver);
> +
> +MODULE_DESCRIPTION("SY7636A sensor driver");
> +MODULE_LICENSE("GPL");
>