From: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org>
To: Maxime Chevallier <maxime.chevallier@bootlin.com>,
davem@davemloft.net, Andrew Lunn <andrew@lunn.ch>,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Marek Behún" <kabel@kernel.org>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Nicolò Veronese" <nicveronese@gmail.com>,
"Simon Horman" <horms@kernel.org>,
mwojtas@chromium.org,
"Romain Gantois" <romain.gantois@bootlin.com>,
"Daniel Golle" <daniel@makrotopia.org>,
"Dimitri Fedrau" <dimitri.fedrau@liebherr.com>,
"Frank Wunderlich" <frank.wunderlich@linux.dev>,
"Pietro Ameruoso" <p.ameruoso@live.it>,
"Aleksei Sviridkin" <f@lex.la>
Subject: Re: [PATCH net-next v18 08/10] netlink: specs: Add ethernet port listing with ethtool
Date: Mon, 28 Sep 2026 11:47:05 +0200 [thread overview]
Message-ID: <0ac92f47-5347-4fa6-bb1c-9a47e1f21413@kernel.org> (raw)
In-Reply-To: <20260927133619.955236-9-maxime.chevallier@bootlin.com>
Le 27/09/2026 à 15:36, Maxime Chevallier a écrit :
> Ethernet network interfaces may have more than one front-facing port.
> The phy_port infrastructure was introduced to keep track of
> these ports, and allow userspace to know about the presence and
> capability of these ports. Add a ethnl netlink message to report this
> information.
>
> Tested-by: Aleksei Sviridkin <f@lex.la>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
I'm not an expert in documentation language, but the content makes sense
and looks consistant.
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
> ---
> Documentation/netlink/specs/ethtool.yaml | 55 +++++++++++++++++++
> Documentation/networking/ethtool-netlink.rst | 36 ++++++++++++
> .../uapi/linux/ethtool_netlink_generated.h | 22 ++++++++
> 3 files changed, 113 insertions(+)
>
> diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
> index 5dd4d1b5d94b..35e028c0be29 100644
> --- a/Documentation/netlink/specs/ethtool.yaml
> +++ b/Documentation/netlink/specs/ethtool.yaml
> @@ -210,6 +210,11 @@ definitions:
> -
> name: discard
> value: 31
> + -
> + name: port-type
> + doc: type of physical connector
> + type: enum
> + entries: [mdi, sfp]
>
> attribute-sets:
> -
> @@ -1905,6 +1910,32 @@ attribute-sets:
> name: link
> type: nest
> nested-attributes: mse-snapshot
> + -
> + name: port
> + attr-cnt-name: --ethtool-a-port-cnt
> + attributes:
> + -
> + name: header
> + type: nest
> + nested-attributes: header
> + -
> + name: id
> + type: u32
> + -
> + name: supported-modes
> + type: nest
> + nested-attributes: bitset
> + -
> + name: supported-interfaces
> + type: nest
> + nested-attributes: bitset
> + -
> + name: type
> + type: u32
> + enum: port-type
> + -
> + name: upstream-port
> + type: u32
>
> operations:
> enum-model: directional
> @@ -2859,6 +2890,30 @@ operations:
> - worst-channel
> - link
> dump: *mse-get-op
> + -
> + name: port-get
> + doc: Get ports attached to an interface
> +
> + attribute-set: port
> +
> + do:
> + request:
> + attributes:
> + - header
> + - id
> + reply: &port-get-op-reply
> + attributes:
> + - header
> + - id
> + - supported-modes
> + - supported-interfaces
> + - type
> + - upstream-port
> + dump:
> + request:
> + attributes:
> + - header
> + reply: *port-get-op-reply
>
> mcast-groups:
> list:
> diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
> index 393f2b6d3863..eba226c79ec3 100644
> --- a/Documentation/networking/ethtool-netlink.rst
> +++ b/Documentation/networking/ethtool-netlink.rst
> @@ -247,6 +247,7 @@ Userspace to kernel:
> ``ETHTOOL_MSG_RSS_CREATE_ACT`` create an additional RSS context
> ``ETHTOOL_MSG_RSS_DELETE_ACT`` delete an additional RSS context
> ``ETHTOOL_MSG_MSE_GET`` get MSE diagnostic data
> + ``ETHTOOL_MSG_PORT_GET`` get port information
> ===================================== =================================
>
> Kernel to userspace:
> @@ -305,6 +306,7 @@ Kernel to userspace:
> ``ETHTOOL_MSG_RSS_CREATE_NTF`` additional RSS context created
> ``ETHTOOL_MSG_RSS_DELETE_NTF`` additional RSS context deleted
> ``ETHTOOL_MSG_MSE_GET_REPLY`` MSE diagnostic data
> + ``ETHTOOL_MSG_PORT_GET_REPLY`` port information
> ======================================== =================================
>
> ``GET`` requests are sent by userspace applications to retrieve device
> @@ -2537,6 +2539,39 @@ Within each channel nest, only the metrics supported by the PHY will be present.
> See ``struct phy_mse_snapshot`` kernel documentation in
> ``include/linux/phy.h``.
>
> +PORT_GET
> +========
> +
> +Retrieve information about the physical connection points of a network device,
> +referred to as "ports". User needs to specify a PORT_ID for the DO operation,
> +in which case the DO request returns information about that specific port.
> +
> +As there can be more than one port, the DUMP operation can be used to list the
> +ports present on a given interface, by passing an interface index or name in
> +the dump request.
> +
> +Request contents:
> +
> + ===================================== ====== ===============================
> + ``ETHTOOL_A_PORT_HEADER`` nested request header
> + ``ETHTOOL_A_PORT_ID`` u32 port id
> + ===================================== ====== ===============================
> +
> +Kernel response contents:
> +
> + ======================================= ====== =============================
> + ``ETHTOOL_A_PORT_HEADER`` nested request header
> + ``ETHTOOL_A_PORT_ID`` u32 the port's unique identifier,
> + per netdevice.
> + ``ETHTOOL_A_PORT_SUPPORTED_MODES`` bitset bitset of supported linkmodes
> + ``ETHTOOL_A_PORT_SUPPORTED_INTERFACES`` bitset bitset of supported MII
> + interfaces
> + ``ETHTOOL_A_PORT_TYPE`` u32 the port type
> + ``ETHTOOL_A_PORT_UPSTREAM_PORT`` u32 If any, the index of the MII
> + port that feeds into this
> + port.
> + ======================================= ====== =============================
> +
> Request translation
> ===================
>
> @@ -2647,4 +2682,5 @@ are netlink only.
> n/a ``ETHTOOL_MSG_PHY_GET``
> ``SIOCGHWTSTAMP`` ``ETHTOOL_MSG_TSCONFIG_GET``
> ``SIOCSHWTSTAMP`` ``ETHTOOL_MSG_TSCONFIG_SET``
> + n/a ``ETHTOOL_MSG_PORT_GET``
> =================================== =====================================
> diff --git a/include/uapi/linux/ethtool_netlink_generated.h b/include/uapi/linux/ethtool_netlink_generated.h
> index 8134baf7860f..660e0c08a766 100644
> --- a/include/uapi/linux/ethtool_netlink_generated.h
> +++ b/include/uapi/linux/ethtool_netlink_generated.h
> @@ -78,6 +78,14 @@ enum ethtool_pse_event {
> ETHTOOL_PSE_EVENT_SW_PW_CONTROL_ERROR = 64,
> };
>
> +/*
> + * type of physical connector
> + */
> +enum ethtool_port_type {
> + ETHTOOL_PORT_TYPE_MDI,
> + ETHTOOL_PORT_TYPE_SFP,
> +};
> +
> enum {
> ETHTOOL_A_HEADER_UNSPEC,
> ETHTOOL_A_HEADER_DEV_INDEX,
> @@ -840,6 +848,18 @@ enum {
> ETHTOOL_A_MSE_MAX = (__ETHTOOL_A_MSE_CNT - 1)
> };
>
> +enum {
> + ETHTOOL_A_PORT_HEADER = 1,
> + ETHTOOL_A_PORT_ID,
> + ETHTOOL_A_PORT_SUPPORTED_MODES,
> + ETHTOOL_A_PORT_SUPPORTED_INTERFACES,
> + ETHTOOL_A_PORT_TYPE,
> + ETHTOOL_A_PORT_UPSTREAM_PORT,
> +
> + __ETHTOOL_A_PORT_CNT,
> + ETHTOOL_A_PORT_MAX = (__ETHTOOL_A_PORT_CNT - 1)
> +};
> +
> enum {
> ETHTOOL_MSG_USER_NONE = 0,
> ETHTOOL_MSG_STRSET_GET = 1,
> @@ -893,6 +913,7 @@ enum {
> ETHTOOL_MSG_RSS_CREATE_ACT,
> ETHTOOL_MSG_RSS_DELETE_ACT,
> ETHTOOL_MSG_MSE_GET,
> + ETHTOOL_MSG_PORT_GET,
>
> __ETHTOOL_MSG_USER_CNT,
> ETHTOOL_MSG_USER_MAX = (__ETHTOOL_MSG_USER_CNT - 1)
> @@ -954,6 +975,7 @@ enum {
> ETHTOOL_MSG_RSS_CREATE_NTF,
> ETHTOOL_MSG_RSS_DELETE_NTF,
> ETHTOOL_MSG_MSE_GET_REPLY,
> + ETHTOOL_MSG_PORT_GET_REPLY,
>
> __ETHTOOL_MSG_KERNEL_CNT,
> ETHTOOL_MSG_KERNEL_MAX = (__ETHTOOL_MSG_KERNEL_CNT - 1)
next prev parent reply other threads:[~2026-09-28 9:47 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 13:36 [PATCH net-next v18 00/10] net: phy_port: SFP modules representation and phy_port listing Maxime Chevallier
2026-09-27 13:36 ` [PATCH net-next v18 01/10] net: phy: phy_link_topology: Add a helper for opportunistic alloc Maxime Chevallier
2026-09-28 9:36 ` Christophe Leroy (CS GROUP)
2026-09-27 13:36 ` [PATCH net-next v18 02/10] net: phy: phy_link_topology: Track ports in phy_link_topology Maxime Chevallier
2026-09-28 9:37 ` Christophe Leroy (CS GROUP)
2026-09-27 13:36 ` [PATCH net-next v18 03/10] net: phylink: Register a phy_port for MAC-driven SFP cages Maxime Chevallier
2026-09-28 9:38 ` Christophe Leroy (CS GROUP)
2026-09-27 13:36 ` [PATCH net-next v18 04/10] net: phy: Create SFP phy_port before registering upstream Maxime Chevallier
2026-09-28 9:40 ` Christophe Leroy (CS GROUP)
2026-09-27 13:36 ` [PATCH net-next v18 05/10] net: phy: Represent PHY-less SFP modules with phy_port Maxime Chevallier
2026-09-28 9:42 ` Christophe Leroy (CS GROUP)
2026-09-27 13:36 ` [PATCH net-next v18 06/10] net: phy: phy_port: Store information about a port's upstream Maxime Chevallier
2026-09-28 9:43 ` Christophe Leroy (CS GROUP)
2026-09-27 13:36 ` [PATCH net-next v18 07/10] net: phy: phy_link_topology: Add a helper to retrieve ports Maxime Chevallier
2026-09-28 9:43 ` Christophe Leroy (CS GROUP)
2026-09-27 13:36 ` [PATCH net-next v18 08/10] netlink: specs: Add ethernet port listing with ethtool Maxime Chevallier
2026-09-28 9:47 ` Christophe Leroy (CS GROUP) [this message]
2026-09-27 13:36 ` [PATCH net-next v18 09/10] net: ethtool: Introduce ethtool command to list ports Maxime Chevallier
2026-09-28 9:48 ` Christophe Leroy (CS GROUP)
2026-09-27 13:36 ` [PATCH net-next v18 10/10] Documentation: networking: Update the phy_port infrastructure description Maxime Chevallier
2026-09-28 10:07 ` Christophe Leroy (CS GROUP)
2026-09-28 17:31 ` [PATCH net-next v18 00/10] net: phy_port: SFP modules representation and phy_port listing Christophe Leroy (CS GROUP)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0ac92f47-5347-4fa6-bb1c-9a47e1f21413@kernel.org \
--to=chleroy@kernel.org \
--cc=andrew@lunn.ch \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=dimitri.fedrau@liebherr.com \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=f@lex.la \
--cc=frank.wunderlich@linux.dev \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kabel@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maxime.chevallier@bootlin.com \
--cc=mwojtas@chromium.org \
--cc=netdev@vger.kernel.org \
--cc=nicveronese@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=p.ameruoso@live.it \
--cc=pabeni@redhat.com \
--cc=romain.gantois@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®