Re: [PATCH v2 2/2] ARM: dts: imx6q: Add Variscite MX6 Custom board support

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 20/07/2023 00:41, James Hilliard wrote:
> This patch adds support for the Variscite MX6 SoM Carrier Board.
> 
> This Carrier-Board has the following :
> - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display
> - HDMI Connector
> - USB Host + USB OTG Connector
> - 10/100/1000 Mbps Ethernet
> - miniPCI-Express slot
> - SD Card connector
> - Audio Headphone/Line In jack connectors
> - S-ATA
> - On-board DMIC
> - RS485 Header
> - CAN bus header
> - SPI header
> - Camera Interfaces header
> - OnBoard RTC with Coin Backup battery socket
> - RS232 Debug Header (IDC10)
> - RS232 DTE
> 
> Product Page : https://www.variscite.com/product/single-board-computers/var-mx6customboard
> 
> The dts file based on the ones provided by Variscite on their own
> kernel, but adapted for mainline.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
> ---
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +

Please run scripts/checkpatch.pl and fix reported warnings. Some
warnings can be ignored, but the code here looks like it needs a fix.
Feel free to get in touch if the warning is not clear.

>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../arm/boot/dts/imx6q-var-mx6customboard.dts | 279 ++++++++++++++++++
>  3 files changed, 281 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6q-var-mx6customboard.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 15d411084065..0f583852de8a 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -298,6 +298,7 @@ properties:
>                - udoo,imx6q-udoo           # Udoo i.MX6 Quad Board
>                - uniwest,imx6q-evi         # Uniwest Evi
>                - variscite,dt6customboard
> +              - variscite,mx6customboard
>                - wand,imx6q-wandboard      # Wandboard i.MX6 Quad Board
>                - ysoft,imx6q-yapp4-crux    # i.MX6 Quad Y Soft IOTA Crux board
>                - ysoft,imx6q-yapp4-pegasus # i.MX6 Quad Y Soft IOTA Pegasus board
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 59829fc90315..9cfc3d3e91ea 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -665,6 +665,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6q-udoo.dtb \
>  	imx6q-utilite-pro.dtb \
>  	imx6q-var-dt6customboard.dtb \
> +	imx6q-var-mx6customboard.dtb \
>  	imx6q-vicut1.dtb \
>  	imx6q-wandboard.dtb \
>  	imx6q-wandboard-revb1.dtb \
> diff --git a/arch/arm/boot/dts/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/imx6q-var-mx6customboard.dts
> new file mode 100644
> index 000000000000..66047dff11ec
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-var-mx6customboard.dts
> @@ -0,0 +1,279 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Support for Variscite MX6 Carrier-board
> + *
> + * Copyright 2016 Variscite, Ltd. All Rights Reserved
> + * Copyright 2022 Bootlin
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6qdl-var-som.dtsi"
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	model = "Variscite i.MX6 QUAD/DUAL VAR-SOM-MX6 Custom Board";
> +	compatible = "variscite,mx6customboard", "fsl,imx6q";

Where is the SoM compatible?

Best regards,
Krzysztof