mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefan Wahren <wahrenst@gmx.net>
To: Lukasz Majewski <lukma@denx.de>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
	davem@davemloft.net, Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Richard Cochran <richardcochran@gmail.com>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [net-next v4 5/5] ARM: mxs_defconfig: Enable CONFIG_FEC_MTIP_L2SW to support MTIP L2 switch
Date: Thu, 10 Apr 2025 09:58:20 +0200	[thread overview]
Message-ID: <0afc4cc5-5402-4746-907a-6cd92aa8889a@gmx.net> (raw)
In-Reply-To: <20250410090122.0e4cadef@wsk>

Am 10.04.25 um 09:01 schrieb Lukasz Majewski:
> Hi Stefan,
>
>> Hi Lukasz,
>>
>> Am 07.04.25 um 16:51 schrieb Lukasz Majewski:
>>> This patch enables support for More Than IP switch available on some
>>> imx28[7] devices.
>>>
>>> Signed-off-by: Lukasz Majewski <lukma@denx.de>
>> thanks adding the driver to mxs_defconfig. Unfortunately it's not
>> possible for reviewers to identify the relevant changes,
> Could you be more specific here?
> As fair as I see - there is only 14 LOCs changed for review.
Yes, this is exactly the problem. The subject suggests enable one
driver, but the changes are not self-explaining.
> Please also be aware that MTIP L2 switch driver has some dependencies -
> on e.g. SWITCHDEV and BRIDGE, which had to be enabled to allow the
> former one to be active.
This should be part of the commit message.
>
>> also the
>> commit messages doesn't provide further information.
>>
> What kind of extra information shall I provide? IMHO the patch is
> self-explaining.
No, it is not. How should a reviewer know that

CONFIG_MTD_M25P80=y

should be dropped? This is completely unrelated to the change.
>
>> In general there are two approaches to solves this:
>> 1) prepend an additional patch which synchronizes mxs_defconfig with
>> current mainline
>> 2) manually create the relevant changes against mxs_defconfig
>>
>> The decision about the approaches is up to the maintainer.
> I took the linux-next's (or net-next) mxs defconfig (cp it to be
> .config)
>
> Then run CROSS_COMPILE= ... make ARCH=arm menuconfig
> Enabled all the relevant Kconfig options and run
>
> CROSS_COMPILE= ... make ARCH=arm savedefconfig
> and copy defconfig to mxs_defconfig.
> Then I used git to prepare the patch.
>
> Isn't the above procedure correct?
The problem here is that you send a patch for two steps. First is to
synchronize mxs_defconfig against current tree and the second is to
enable the driver.

Regards
>
>
>> Btw driver review will follow ...
>>
>> Regards
>>> ---
>>> Changes for v4:
>>> - New patch
>>> ---
>>>    arch/arm/configs/mxs_defconfig | 14 +++-----------
>>>    1 file changed, 3 insertions(+), 11 deletions(-)
>>>
>>> diff --git a/arch/arm/configs/mxs_defconfig
>>> b/arch/arm/configs/mxs_defconfig index d8a6e43c401e..4dc4306c035f
>>> 100644 --- a/arch/arm/configs/mxs_defconfig
>>> +++ b/arch/arm/configs/mxs_defconfig
>>> @@ -32,11 +32,10 @@ CONFIG_INET=y
>>>    CONFIG_IP_PNP=y
>>>    CONFIG_IP_PNP_DHCP=y
>>>    CONFIG_SYN_COOKIES=y
>>> -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
>>> -# CONFIG_INET_XFRM_MODE_TUNNEL is not set
>>> -# CONFIG_INET_XFRM_MODE_BEET is not set
>>>    # CONFIG_INET_DIAG is not set
>>>    # CONFIG_IPV6 is not set
>>> +CONFIG_BRIDGE=y
>>> +CONFIG_NET_SWITCHDEV=y
>>>    CONFIG_CAN=m
>>>    # CONFIG_WIRELESS is not set
>>>    CONFIG_DEVTMPFS=y
>>> @@ -45,7 +44,6 @@ CONFIG_MTD=y
>>>    CONFIG_MTD_CMDLINE_PARTS=y
>>>    CONFIG_MTD_BLOCK=y
>>>    CONFIG_MTD_DATAFLASH=y
>>> -CONFIG_MTD_M25P80=y
>>>    CONFIG_MTD_SST25L=y
>>>    CONFIG_MTD_RAW_NAND=y
>>>    CONFIG_MTD_NAND_GPMI_NAND=y
>>> @@ -56,11 +54,11 @@ CONFIG_EEPROM_AT24=y
>>>    CONFIG_SCSI=y
>>>    CONFIG_BLK_DEV_SD=y
>>>    CONFIG_NETDEVICES=y
>>> +CONFIG_FEC_MTIP_L2SW=y
>>>    CONFIG_ENC28J60=y
>>>    CONFIG_ICPLUS_PHY=y
>>>    CONFIG_MICREL_PHY=y
>>>    CONFIG_REALTEK_PHY=y
>>> -CONFIG_SMSC_PHY=y
>>>    CONFIG_CAN_FLEXCAN=m
>>>    CONFIG_USB_USBNET=y
>>>    CONFIG_USB_NET_SMSC95XX=y
>>> @@ -77,13 +75,11 @@ CONFIG_SERIAL_AMBA_PL011=y
>>>    CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
>>>    CONFIG_SERIAL_MXS_AUART=y
>>>    # CONFIG_HW_RANDOM is not set
>>> -# CONFIG_I2C_COMPAT is not set
>>>    CONFIG_I2C_CHARDEV=y
>>>    CONFIG_I2C_MXS=y
>>>    CONFIG_SPI=y
>>>    CONFIG_SPI_GPIO=m
>>>    CONFIG_SPI_MXS=y
>>> -CONFIG_GPIO_SYSFS=y
>>>    # CONFIG_HWMON is not set
>>>    CONFIG_WATCHDOG=y
>>>    CONFIG_STMP3XXX_RTC_WATCHDOG=y
>>> @@ -138,10 +134,6 @@ CONFIG_PWM_MXS=y
>>>    CONFIG_NVMEM_MXS_OCOTP=y
>>>    CONFIG_EXT4_FS=y
>>>    # CONFIG_DNOTIFY is not set
>>> -CONFIG_NETFS_SUPPORT=m
>>> -CONFIG_FSCACHE=y
>>> -CONFIG_FSCACHE_STATS=y
>>> -CONFIG_CACHEFILES=m
>>>    CONFIG_VFAT_FS=y
>>>    CONFIG_TMPFS=y
>>>    CONFIG_TMPFS_POSIX_ACL=y
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH,      Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de


      parent reply	other threads:[~2025-04-10  7:58 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-07 14:51 [net-next v4 0/5] net: mtip: Add support for MTIP imx287 L2 switch driver Lukasz Majewski
2025-04-07 14:51 ` [net-next v4 1/5] dt-bindings: net: Add MTIP L2 switch description Lukasz Majewski
2025-04-10 20:59   ` Rob Herring
2025-04-11 10:36     ` Lukasz Majewski
2025-04-07 14:51 ` [net-next v4 2/5] ARM: dts: nxp: mxs: Adjust the imx28.dtsi " Lukasz Majewski
2025-04-07 14:51 ` [net-next v4 3/5] ARM: dts: nxp: mxs: Adjust XEA board's DTS to support L2 switch Lukasz Majewski
2025-04-09 21:06   ` Andrew Lunn
2025-04-11 13:32   ` Fabio Estevam
2025-04-11 15:45     ` Lukasz Majewski
2025-04-07 14:51 ` [net-next v4 4/5] net: mtip: The L2 switch driver for imx287 Lukasz Majewski
2025-04-08 15:14   ` Simon Horman
2025-04-09 14:28     ` Lukasz Majewski
2025-04-11 12:54       ` Lukasz Majewski
2025-04-09 17:53   ` Stefan Wahren
2025-04-10 13:37     ` Lukasz Majewski
2025-04-11 13:29       ` Stefan Wahren
2025-04-11 16:23         ` Lukasz Majewski
2025-04-09 21:26   ` Andrew Lunn
2025-04-10  7:35     ` Lukasz Majewski
2025-04-07 14:51 ` [net-next v4 5/5] ARM: mxs_defconfig: Enable CONFIG_FEC_MTIP_L2SW to support MTIP L2 switch Lukasz Majewski
2025-04-09 16:01   ` Stefan Wahren
2025-04-10  7:01     ` Lukasz Majewski
2025-04-10  7:08       ` Krzysztof Kozlowski
2025-04-10  9:23         ` Lukasz Majewski
2025-04-10  7:58       ` Stefan Wahren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0afc4cc5-5402-4746-907a-6cd92aa8889a@gmx.net \
    --to=wahrenst@gmx.net \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukma@denx.de \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®