From: Asutosh Das <asutoshd@codeaurora.org>
To: subhashj@codeaurora.org, cang@codeaurora.org,
vivek.gautam@codeaurora.org, rnayak@codeaurora.org,
vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
martin.petersen@oracle.com, asutoshd@codeaurora.org,
linux-mmc@vger.kernel.org
Cc: linux-scsi@vger.kernel.org,
Vijay Viswanath <vviswana@codeaurora.org>,
linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2 10/10] scsi: ufs: Add clock ungating to a separate workqueue
Date: Thu, 3 May 2018 16:37:22 +0530 [thread overview]
Message-ID: <0bfae28dbfb4cf86e80435639b92c7f4023041dc.1525343531.git.asutoshd@codeaurora.org> (raw)
In-Reply-To: <cover.1525341340.git.asutoshd@codeaurora.org>
In-Reply-To: <cover.1525343531.git.asutoshd@codeaurora.org>
From: Vijay Viswanath <vviswana@codeaurora.org>
UFS driver can receive a request during memory reclaim by kswapd.
So when ufs driver puts the ungate work in queue, and if there are no
idle workers, kthreadd is invoked to create a new kworker. Since
kswapd task holds a mutex which kthreadd also needs, this can cause
a deadlock situation. So ungate work must be done in a separate
work queue with WQ_MEM_RECLAIM flag enabled.
Such a workqueue will have a rescue thread which will be called
when the above deadlock condition is possible.
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 11 ++++++++++-
drivers/scsi/ufs/ufshcd.h | 1 +
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 557d538..3be61b7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1483,7 +1483,8 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
hba->clk_gating.state = REQ_CLKS_ON;
trace_ufshcd_clk_gating(dev_name(hba->dev),
hba->clk_gating.state);
- schedule_work(&hba->clk_gating.ungate_work);
+ queue_work(hba->clk_gating.clk_gating_workq,
+ &hba->clk_gating.ungate_work);
/*
* fall through to check if we should wait for this
* work to be done or not.
@@ -1669,6 +1670,8 @@ static ssize_t ufshcd_clkgate_enable_store(struct device *dev,
static void ufshcd_init_clk_gating(struct ufs_hba *hba)
{
+ char wq_name[sizeof("ufs_clk_gating_00")];
+
if (!ufshcd_is_clkgating_allowed(hba))
return;
@@ -1676,6 +1679,11 @@ static void ufshcd_init_clk_gating(struct ufs_hba *hba)
INIT_DELAYED_WORK(&hba->clk_gating.gate_work, ufshcd_gate_work);
INIT_WORK(&hba->clk_gating.ungate_work, ufshcd_ungate_work);
+ snprintf(wq_name, ARRAY_SIZE(wq_name), "ufs_clk_gating_%d",
+ hba->host->host_no);
+ hba->clk_gating.clk_gating_workq = alloc_ordered_workqueue(wq_name,
+ WQ_MEM_RECLAIM);
+
hba->clk_gating.is_enabled = true;
hba->clk_gating.delay_attr.show = ufshcd_clkgate_delay_show;
@@ -1703,6 +1711,7 @@ static void ufshcd_exit_clk_gating(struct ufs_hba *hba)
device_remove_file(hba->dev, &hba->clk_gating.enable_attr);
cancel_work_sync(&hba->clk_gating.ungate_work);
cancel_delayed_work_sync(&hba->clk_gating.gate_work);
+ destroy_workqueue(hba->clk_gating.clk_gating_workq);
}
/* Must be called with host lock acquired */
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 76c31d5..2e6bdc0 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -361,6 +361,7 @@ struct ufs_clk_gating {
struct device_attribute enable_attr;
bool is_enabled;
int active_reqs;
+ struct workqueue_struct *clk_gating_workq;
};
struct ufs_saved_pwr_info {
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2018-05-03 11:15 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1525341340.git.asutoshd@codeaurora.org>
[not found] ` <cover.1525343531.git.asutoshd@codeaurora.org>
2018-05-03 11:07 ` [PATCH v2 01/10] scsi: ufs: Allowing power mode change Asutosh Das
2018-05-16 21:09 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 02/10] scsi: ufs-qcom: Enable UFSHCD_QUIRK_BROKEN_PWR_MODE_CHANGE quirk Asutosh Das
2018-05-16 21:10 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 03/10] scsi: ufs: Add LCC quirk for host and device Asutosh Das
2018-05-16 21:11 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 04/10] scsi: ufs: fix exception event handling Asutosh Das
2018-05-16 21:12 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 05/10] scsi: ufshcd: fix possible unclocked register access Asutosh Das
2018-05-16 21:12 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 06/10] scsi: ufs: add reference counting for scsi block requests Asutosh Das
2018-05-16 21:13 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 07/10] scsi: ufs-qcom: remove broken hci version quirk Asutosh Das
2018-05-16 21:13 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 08/10] scsi: ufs: make sure all interrupts are processed Asutosh Das
2018-05-16 21:14 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 09/10] scsi: ufs: fix irq return code Asutosh Das
2018-06-28 22:26 ` Subhash Jadavani
2018-05-03 11:07 ` Asutosh Das [this message]
2018-05-16 21:14 ` [PATCH v2 10/10] scsi: ufs: Add clock ungating to a separate workqueue Subhash Jadavani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0bfae28dbfb4cf86e80435639b92c7f4023041dc.1525343531.git.asutoshd@codeaurora.org \
--to=asutoshd@codeaurora.org \
--cc=cang@codeaurora.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=rnayak@codeaurora.org \
--cc=subhashj@codeaurora.org \
--cc=vinholikatti@gmail.com \
--cc=vivek.gautam@codeaurora.org \
--cc=vviswana@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®