Re: [PATCH 2/5] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: fix ov7251 lane properties

[Neil Armstrong <neil.armstrong@linaro.org>]

On 04/12/2024 12:05, Dmitry Baryshkov wrote:
> On Wed, Dec 04, 2024 at 11:56:54AM +0100, Neil Armstrong wrote:
>> Bindings documents data-lanes as a single entry with a separate
>> clock-lanes property, but DT uses 2 entries in data-lanes.
>>
>> This would suggest clock-lanes is missing, fix the DT using the
>> bindings example.
>>
>> This fixes:
>> sdm845-db845c-navigation-mezzanine.dtso: camera@60: port:endpoint:data-lanes: [0, 1] is too long
>> 	from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml#
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso | 3 ++-
>>   1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
>> index 0a87df806cafc8e726aacc07a772ca478d0ee3df..5a16f4c2b346b314af3d614266e1ca034057e643 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
>> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
>> @@ -115,7 +115,8 @@ camera@60 {
>>   
>>   		port {
>>   			ov7251_ep: endpoint {
>> -				data-lanes = <0 1>;
>> +				clock-lanes = <1>;
>> +				data-lanes = <0>;
> 
> Is it really this way or the other way around, clock = <0>, data = <1>?

No idea actually, on the schematics the lanes from the DB845 are :

CSI0_P/N -> OV7251_CSI3_LANE0_P/N -> MIPI_CSI3_LANE0_P -> SoC
and
CLKP/N -> OV7251_CSI3_CLK_P/N -> MIPI_CSI3_CLK_P/N -> SoC

So I assume the data-lane is 0, for clock-lane I just used
the example, but I found nothing in the code using those assignments

Neil

> 
>>   /*				remote-endpoint = <&csiphy3_ep>; */
>>   			};
>>   		};
>>
>> -- 
>> 2.34.1
>>
>