Re: [PATCH v7 1/3] xhci: Add hub_control to xhci_driver_overrides

[Jon Hunter <jonathanh@nvidia.com>]

On 11/11/2022 10:18, Jim Lin wrote:
> Add a hub_control() callback to the xhci_driver_overrides structure to
> allow host drivers to override the default hub_control function. This
> is required for Tegra which requires device specific actions for power
> management to be executed during USB state transitions.
> 
> Signed-off-by: Jim Lin <jilin@nvidia.com>
> 
> ---
> v5: new change
> v6: adjust parameter alignment (xhci.h hub_control)
> v7: change commit message
> 
>   drivers/usb/host/xhci.c | 2 ++
>   drivers/usb/host/xhci.h | 2 ++
>   2 files changed, 4 insertions(+)
> 
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 902f410874e8..3c7bf0a0e0b4 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -5461,6 +5461,8 @@ void xhci_init_driver(struct hc_driver *drv,
>   			drv->check_bandwidth = over->check_bandwidth;
>   		if (over->reset_bandwidth)
>   			drv->reset_bandwidth = over->reset_bandwidth;
> +		if (over->hub_control)
> +			drv->hub_control = over->hub_control;
>   	}
>   }
>   EXPORT_SYMBOL_GPL(xhci_init_driver);
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 5a75fe563123..f51b674fc10c 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1943,6 +1943,8 @@ struct xhci_driver_overrides {
>   			     struct usb_host_endpoint *ep);
>   	int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
>   	void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
> +	int (*hub_control)(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
> +			   u16 wIndex, char *buf, u16 wLength);
>   };
>   
>   #define	XHCI_CFC_DELAY		10

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>

Thanks
Jon

-- 
nvpublic