From: Peter Senna Tschudin <peter.senna@collabora.com>
To: peter.senna@gmail.com, airlied@linux.ie, architt@codeaurora.org,
akpm@linux-foundation.org, daniel.vetter@ffwll.ch,
davem@davemloft.net, devicetree@vger.kernel.org,
dri-devel@lists.freedesktop.org, enric.balletbo@collabora.com,
eballetbo@gmail.com, galak@codeaurora.org,
gregkh@linuxfoundation.org, heiko@sntech.de,
ijc+devicetree@hellion.org.uk, javier@dowhile0.org,
jslaby@suse.cz, kernel@pengutronix.de,
linux-arm-kernel@lists.infradead.org, linux@armlinux.org.uk,
linux-kernel@vger.kernel.org, linux@roeck-us.net,
mark.rutland@arm.com, martin.donnelly@ge.com,
martyn.welch@collabora.co.uk, mchehab@osg.samsung.com,
pawel.moll@arm.com, peter.senna@collabora.com,
p.zabel@pengutronix.de, thierry.reding@gmail.com,
rmk+kernel@armlinux.org.uk, robh+dt@kernel.org,
shawnguo@kernel.org, tiwai@suse.com, treding@nvidia.com,
ykk@rock-chips.com, laurent.pinchart@ideasonboard.com
Cc: Rob Herring <robh@kernel.org>,
Fabio Estevam <fabio.estevam@nxp.com>,
Rask Ingemann Lambertsen <ccc94453@vip.cybercity.dk>
Subject: [PATCH 1/4] Documentation/devicetree/bindings/video/bridge: megachips-stdpxxxx-ge-b850v3-fw
Date: Sat, 28 Jan 2017 15:21:30 +0100 [thread overview]
Message-ID: <0d72b822a603b729fa9fa1103daa336430cd2d1a.1485611969.git.peter.senna@collabora.com> (raw)
In-Reply-To: <cover.1485611969.git.peter.senna@collabora.com>
In-Reply-To: <cover.1485611969.git.peter.senna@collabora.com>
Devicetree binding documentation for the second video output
of the GE B850v3:
STDP4028-ge-b850v3-fw bridges (LVDS-DP)
STDP2690-ge-b850v3-fw bridges (DP-DP++)
Added entry for MegaChips at:
Documentation/devicetree/bindings/vendor-prefixes.txt
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
---
.../devicetree/bindings/vendor-prefixes.txt | 1 +
.../bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | 92 ++++++++++++++++++++++
2 files changed, 93 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 1ef148d..b4c2f5c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -175,6 +175,7 @@ maxim Maxim Integrated Products
mcube mCube
meas Measurement Specialties
mediatek MediaTek Inc.
+megachips MegaChips
melexis Melexis N.V.
melfas MELFAS Inc.
memsic MEMSIC Inc.
diff --git a/Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
new file mode 100644
index 0000000..471db27
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -0,0 +1,92 @@
+Drivers for the second video output of the GE B850v3:
+ STDP4028-ge-b850v3-fw bridges (LVDS-DP)
+ STDP2690-ge-b850v3-fw bridges (DP-DP++)
+
+The video processing pipeline on the second output on the GE B850v3:
+
+ Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+Each bridge has a dedicated flash containing firmware for supporting the custom
+design. The result is that, in this design, neither the STDP4028 nor the
+STDP2690 behave as the stock bridges would. The compatible strings include the
+suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
+the firmware specific for the GE B850v3.
+
+The driver is powerless to control the video processing pipeline, as the two
+bridges behaves as a single one. The driver is only needed for telling the host
+about EDID / HPD, and for giving the host powers to ack interrupts.
+
+Required properties:
+ - compatible : should be "megachips,stdp4028-ge-b850v3-fw" or
+ "megachips,stdp2690-ge-b850v3-fw".
+ - reg : should contain the main address which is used to communicate with
+ the bridge over i2c.
+ - interrupt-parent : phandle of the interrupt controller that services
+ interrupts to the device (stdp4028-ge-b850v3-fw)
+ - interrupts : one interrupt should be described here, as in
+ <0 IRQ_TYPE_LEVEL_HIGH> (stdp4028-ge-b850v3-fw)
+ - ports : should describe the video signal connection between the host
+ and the bridges.
+
+Example:
+
+&mux2_i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ stdp4028@73 {
+ compatible = "megachips,stdp4028-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x73>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp4028_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ stdp4028_out: endpoint {
+ remote-endpoint = <&stdp2690_in>;
+ };
+ };
+ };
+ };
+
+ stdp2690@72 {
+ compatible = "megachips,stdp2690-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x72>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp2690_in: endpoint {
+ remote-endpoint = <&stdp4028_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ stdp2690_out: endpoint {
+ /* Connector for external display */
+ };
+ };
+ };
+ };
+};
--
2.5.5
next prev parent reply other threads:[~2017-01-28 14:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-28 14:21 [PATCH 0/4] megachips-stdpxxxx-ge-b850v3-fw (was V7 GE B850v3 LVDS/DP++ Bridge) Peter Senna Tschudin
2017-01-28 14:21 ` Peter Senna Tschudin [this message]
2017-02-01 15:57 ` [PATCH 1/4] Documentation/devicetree/bindings/video/bridge: megachips-stdpxxxx-ge-b850v3-fw Rob Herring
2017-01-28 14:21 ` [PATCH 2/4] MAINTAINERS: Add entry for megachips-stdpxxxx-ge-b850v3-fw Peter Senna Tschudin
2017-01-28 14:21 ` [PATCH 3/4] drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++) Peter Senna Tschudin
2017-02-01 10:47 ` Archit Taneja
2017-02-27 13:40 ` Peter Senna Tschudin
2017-02-28 3:17 ` Archit Taneja
2017-01-28 14:21 ` [PATCH 4/4] dts/imx6q-b850v3: Use megachips-stdpxxxx-ge-b850v3-fw bridges (LVDS-DP++) Peter Senna Tschudin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0d72b822a603b729fa9fa1103daa336430cd2d1a.1485611969.git.peter.senna@collabora.com \
--to=peter.senna@collabora.com \
--cc=airlied@linux.ie \
--cc=akpm@linux-foundation.org \
--cc=architt@codeaurora.org \
--cc=ccc94453@vip.cybercity.dk \
--cc=daniel.vetter@ffwll.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eballetbo@gmail.com \
--cc=enric.balletbo@collabora.com \
--cc=fabio.estevam@nxp.com \
--cc=galak@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=javier@dowhile0.org \
--cc=jslaby@suse.cz \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=martin.donnelly@ge.com \
--cc=martyn.welch@collabora.co.uk \
--cc=mchehab@osg.samsung.com \
--cc=p.zabel@pengutronix.de \
--cc=pawel.moll@arm.com \
--cc=peter.senna@gmail.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
--cc=treding@nvidia.com \
--cc=ykk@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®