Re: [PATCH 3/3] Documentation: devicetree: add PPMU events description

[Chanwoo Choi <cw00.choi@samsung.com>]

Hi Lukasz,

On 19. 4. 17. 오후 4:48, Lukasz Luba wrote:
> Extend the documenation by events description with new 'event-data-type'
> field. Add example how the event might be defined in DT.
> 
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
>  .../devicetree/bindings/devfreq/event/exynos-ppmu.txt  | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
> index 3e36c1d..47feb5f 100644
> --- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
> +++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
> @@ -145,3 +145,21 @@ Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below.
>  			reg = <0x104d0000 0x2000>;
>  			status = "disabled";
>  		};
> +
> +The 'event' type specified in the PPMU node defines 'event-name'
> +which also contains 'id' number and optionally 'event-data-type'.
> +
> +Example:
> +
> +		events {
> +			ppmu_leftbus_0: ppmu-event0-leftbus {
> +				event-name = "ppmu-event0-leftbus";
> +				event-data-type = <PPMU_RO_DATA_CNT>;
> +			};
> +		};
> +
> +The 'event-data-type' defines the type of data which shell be counted
> +by the counter. You can check include/dt-bindings/pmu/exynos_ppmu.h for

I replied about 'pmu' name on patch2. Please check it.

> +all possible type, i.e. count read requests, count write data in bytes,
> +etc. This field is optional and when it is missing, the driver code will
> +use default data type.
> 
Looks good to me.
But, If you want to add the new 'event-data-type' property,
you better to add 'event-data-type' to Exynos dts file including
PPMU device.

If the dts file contain the data type information,
I think it is easy to understand for the user
what is monitoring on PPMU device.


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics