Re: [PATCH v2 8/9] arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes

[Wadim Egorov <w.egorov@phytec.de>]

Am 13.02.24 um 09:19 schrieb Francesco Dolcini:
> On Tue, Feb 13, 2024 at 06:07:28AM +0100, Wadim Egorov wrote:
>> Hi Judith,
>>
>> Am 13.02.24 um 01:24 schrieb Judith Mendez:
>>> Move bus-width property to *main.dtsi, above the OTAP/ITAP
>>> delay values. While there is no error with where it is
>>> currently at, it is easier to read the MMC node if the
>>> bus-width property is located above the OTAP/ITAP delay
>>> values consistently across MMC nodes.
>>>
>>> Add missing bus-width for MMC2 in k3-am62-main.
>>>
>>> Signed-off-by: Judith Mendez <jm@ti.com>
>>> ---
>>>    arch/arm64/boot/dts/ti/k3-am62-main.dtsi       | 5 +++--
>>>    arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 -
>>>    arch/arm64/boot/dts/ti/k3-am62a-main.dtsi      | 2 +-
>>>    arch/arm64/boot/dts/ti/k3-am64-main.dtsi       | 2 ++
>>>    arch/arm64/boot/dts/ti/k3-am642-evm.dts        | 2 --
>>>    arch/arm64/boot/dts/ti/k3-am642-sk.dts         | 1 -
>> I think you missed to update all non TI boards.
> Not sure which boards are you referring to.
>
> I would not change the verdin-am62 boards, the bus-width there is
> consistent with the schematics, it's just correct and in the right place
> IMO.

Ah, yes. Agree.


>
> Francesco
>