Re: [PATCH 0/2] net: phy: relax error checking when creating sysfs link netdev->phydev

[Grygorii Strashko <grygorii.strashko@ti.com>]

On 03/16/2018 02:54 PM, Andrew Lunn wrote:
>> The phydrv->mdiodrv.flags can be accessible only after call to of_phy_connect()/phy_connect(),
> 
> You need to use a function like of_phy_find_device() to get the
> phydev, set the flag, and then call phy_connect_direct().


So, do you propose me to replace direct calls of of_phy_connect()/phy_connect() in
CPSW driver with buddies of the same functions? Right?

cpsw_slave_open()
{
....
	if (slave->data->phy_node) {
		phy = of_phy_connect(priv->ndev, slave->data->phy_node,
				 &cpsw_adjust_link, 0, slave->data->phy_if);
----- replace ^^^^ with below
{
	struct phy_device *phy = of_phy_find_device(phy_np);
	int ret;

	if (!phy)
		return NULL;

	phy->dev_flags = flags;

-----	[set flag in phydrv->mdiodrv.flags]

	ret = phy_connect_direct(dev, phy, hndlr, iface);

	/* refcount is held by phy_connect_direct() on success */
	put_device(&phy->mdio.dev);

	return ret ? NULL : phy;
}
-----
		if (!phy) {
			dev_err(priv->dev, "phy \"%pOF\" not found on slave %d\n",
				slave->data->phy_node,
				slave->slave_num);
			return;
		}
	} else {
		phy = phy_connect(priv->ndev, slave->data->phy_id,
				 &cpsw_adjust_link, slave->data->phy_if);
----- replace ^^^^ with below
{
	struct phy_device *phydev;
	struct device *d;
	int rc;

	/* Search the list of PHY devices on the mdio bus for the
	 * PHY with the requested name
	 */
	d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
	if (!d) {
		pr_err("PHY %s not found\n", bus_id);
		return ERR_PTR(-ENODEV);
	}
	phydev = to_phy_device(d);

-----	[set flag in phydrv->mdiodrv.flags]

	rc = phy_connect_direct(dev, phydev, handler, interface);
	put_device(d);
	if (rc)
		return ERR_PTR(rc);

	return phydev;
}
-----
		if (IS_ERR(phy)) {
			dev_err(priv->dev,
				"phy \"%s\" not found on slave %d, err %ld\n",
				slave->data->phy_id, slave->slave_num,
				PTR_ERR(phy));
			return;
		}
	}
}

and all above just to set a flag which will be used by just one driver as of now.

Hm. Is this some sort of punishment ;) Sry. I'll probably will take a pause.

-- 
regards,
-grygorii