Re: [PATCH net-next v2 5/7] net: phy: microchip_t1s: add support for Microchip's LAN867X Rev.C1

[<Parthiban.Veerasooran@microchip.com>]

Hi Simon,

On 03/09/24 1:00 pm, Simon Horman wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Mon, Sep 02, 2024 at 08:04:56PM +0530, Parthiban Veerasooran wrote:
>> This patch adds support for LAN8670/1/2 Rev.C1 as per the latest
>> configuration note AN1699 released (Revision E (DS60001699F - June 2024))
>> https://www.microchip.com/en-us/application-notes/an1699
>>
>> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
> 
> ...
> 
>> diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c
> 
> ...
> 
>> @@ -290,6 +291,58 @@ static int lan867x_check_reset_complete(struct phy_device *phydev)
>>        return 0;
>>   }
>>
>> +static int lan867x_revc1_config_init(struct phy_device *phydev)
>> +{
>> +     s8 offsets[2];
>> +     int ret;
>> +
>> +     ret = lan867x_check_reset_complete(phydev);
>> +     if (ret)
>> +             return ret;
>> +
>> +     ret = lan865x_generate_cfg_offsets(phydev, offsets);
>> +     if (ret)
>> +             return ret;
>> +
>> +     /* LAN867x Rev.C1 configuration settings are equal to the first 9
>> +      * configuration settings and all the sqi fixup settings from LAN865x
>> +      * Rev.B0/B1. So the same fixup registers and values from LAN865x
>> +      * Rev.B0/B1 are used for LAN867x Rev.C1 to avoid duplication.
>> +      * Refer the below links for the comparision.
> 
> nit: comparison
> 
>       Flagged by checkpatch.pl --codespell
Ah yes, will correct it in the next version.

Best regards,
Parthiban V
> 
>> +      * https://www.microchip.com/en-us/application-notes/an1760
>> +      * Revision F (DS60001760G - June 2024)
>> +      * https://www.microchip.com/en-us/application-notes/an1699
>> +      * Revision E (DS60001699F - June 2024)
>> +      */