mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joao Pinto <Joao.Pinto@synopsys.com>
To: Rayagond Kokatanur <rayagond@vayavyalabs.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>
Cc: David Miller <davem@davemloft.net>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	<linux-kernel@vger.kernel.org>, netdev <netdev@vger.kernel.org>
Subject: Re: [PATCH] stmmac: adding EEE to GMAC4
Date: Fri, 20 Jan 2017 15:58:38 +0000	[thread overview]
Message-ID: <0e624bc6-655d-5ec0-bd1f-3fd7251673d9@synopsys.com> (raw)
In-Reply-To: <CAJ3bTp7XHNd+oc9QsX25iX_umARFjSveehPY_a+quJBnj-okkA@mail.gmail.com>


Sorry, please ignore, wrong patch file.

Joao Pinto

Às 6:01 AM de 1/19/2017, Rayagond Kokatanur escreveu:
> On Thu, Dec 29, 2016 at 10:40 PM, Joao Pinto <Joao.Pinto@synopsys.com> wrote:
>> This patch adds Energy Efficiency Ethernet to GMAC4.
>>
>> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
>> ---
>>  drivers/net/ethernet/stmicro/stmmac/dwmac4.h      | 12 +++++
>>  drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 59 +++++++++++++++++++++++
>>  2 files changed, 71 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
>> index b524598..73d1dab 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
>> @@ -90,6 +90,18 @@ enum power_event {
>>         power_down = 0x00000001,
>>  };
>>
>> +/* Energy Efficient Ethernet (EEE) for GMAC4
>> + *
>> + * LPI status, timer and control register offset
>> + */
>> +#define GMAC4_LPI_CTRL_STATUS  0xd0
>> +#define GMAC4_LPI_TIMER_CTRL   0xd4
>> +
>> +/* LPI control and status defines */
>> +#define GMAC4_LPI_CTRL_STATUS_LPITXA   BIT(19) /* Enable LPI TX Automate */
>> +#define GMAC4_LPI_CTRL_STATUS_PLS      BIT(17) /* PHY Link Status */
>> +#define GMAC4_LPI_CTRL_STATUS_LPIEN    BIT(16) /* LPI Enable */
>> +
>>  /* MAC Debug bitmap */
>>  #define GMAC_DEBUG_TFCSTS_MASK         GENMASK(18, 17)
>>  #define GMAC_DEBUG_TFCSTS_SHIFT                17
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
>> index ecfbf57..02eab79 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
>> @@ -137,6 +137,61 @@ static void dwmac4_get_umac_addr(struct mac_device_info *hw,
>>                                    GMAC_ADDR_LOW(reg_n));
>>  }
>>
>> +static void dwmac4_set_eee_mode(struct mac_device_info *hw)
>> +{
>> +       void __iomem *ioaddr = hw->pcsr;
>> +       u32 value;
>> +
>> +       /* Enable the link status receive on RGMII, SGMII ore SMII
>> +        * receive path and instruct the transmit to enter in LPI
>> +        * state.
>> +        */
>> +       value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
>> +       value |= GMAC4_LPI_CTRL_STATUS_LPIEN | GMAC4_LPI_CTRL_STATUS_LPITXA;
>> +
>> +       writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
>> +}
>> +
>> +static void dwmac4_reset_eee_mode(struct mac_device_info *hw)
>> +{
>> +       void __iomem *ioaddr = hw->pcsr;
>> +       u32 value;
>> +
>> +       value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
>> +       value &= ~(GMAC4_LPI_CTRL_STATUS_LPIEN | GMAC4_LPI_CTRL_STATUS_LPITXA);
>> +       writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
>> +}
>> +
>> +static void dwmac4_set_eee_pls(struct mac_device_info *hw, int link)
>> +{
>> +       void __iomem *ioaddr = hw->pcsr;
>> +       u32 value;
>> +
>> +       value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
>> +
>> +       if (link)
>> +               value |= GMAC4_LPI_CTRL_STATUS_PLS;
>> +       else
>> +               value &= ~GMAC4_LPI_CTRL_STATUS_PLS;
>> +
>> +       writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
>> +}
>> +
>> +static void dwmac4_set_eee_timer(struct mac_device_info *hw, int ls, int tw)
>> +{
>> +       void __iomem *ioaddr = hw->pcsr;
>> +       int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16);
> 
> If I am not wrong, LS field is 10 bits wide not 11 bits, hence we
> should AND 0x3ff.
> 
> int value = ((tw & 0xffff)) | ((ls & 0x3ff) << 16);
> 
>> +
>> +       /* Program the timers in the LPI timer control register:
>> +        * LS: minimum time (ms) for which the link
>> +        *  status from PHY should be ok before transmitting
>> +        *  the LPI pattern.
>> +        * TW: minimum time (us) for which the core waits
>> +        *  after it has stopped transmitting the LPI pattern.
>> +        */
>> +       writel(value, ioaddr + GMAC4_LPI_TIMER_CTRL);
>> +}
>> +
>>  static void dwmac4_set_filter(struct mac_device_info *hw,
>>                               struct net_device *dev)
>>  {
>> @@ -410,6 +465,10 @@ static const struct stmmac_ops dwmac4_ops = {
>>         .pmt = dwmac4_pmt,
>>         .set_umac_addr = dwmac4_set_umac_addr,
>>         .get_umac_addr = dwmac4_get_umac_addr,
>> +       .set_eee_mode = dwmac4_set_eee_mode,
>> +       .reset_eee_mode = dwmac4_reset_eee_mode,
>> +       .set_eee_timer = dwmac4_set_eee_timer,
>> +       .set_eee_pls = dwmac4_set_eee_pls,
>>         .pcs_ctrl_ane = dwmac4_ctrl_ane,
>>         .pcs_rane = dwmac4_rane,
>>         .pcs_get_adv_lp = dwmac4_get_adv_lp,
>> --
>> 2.9.3
>>
> 
> 
> 

  parent reply	other threads:[~2017-01-20 16:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-29 17:10 Joao Pinto
2016-12-29 20:14 ` David Miller
2017-01-19  6:01 ` Rayagond Kokatanur
2017-01-20 15:49   ` Joao Pinto
2017-01-20 15:58   ` Joao Pinto [this message]
  -- strict thread matches above, loose matches on Subject: below --
2016-12-28 13:04 Joao Pinto
2016-12-29 16:54 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0e624bc6-655d-5ec0-bd1f-3fd7251673d9@synopsys.com \
    --to=joao.pinto@synopsys.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=rayagond@vayavyalabs.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®