From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
To: Jun ASAKA <JunASAKA@zzy040330.moe>, Jes.Sorensen@gmail.com
Cc: kvalo@kernel.org, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] wifi: rtl8xxxu: fixing IQK failures for rtl8192eu
Date: Thu, 1 Dec 2022 17:55:06 +0200 [thread overview]
Message-ID: <0ebf9f47-16bd-aad0-309f-af7616292785@gmail.com> (raw)
In-Reply-To: <20221201145500.7832-1-JunASAKA@zzy040330.moe>
On 01/12/2022 16:55, Jun ASAKA wrote:
> Fixing "Path A RX IQK failed" and "Path B RX IQK failed"
> issues for rtl8192eu chips by replacing the arguments with
> the ones in the updated official driver as shown below.
> 1. https://github.com/Mange/rtl8192eu-linux-driver
> 2. vendor driver version: 5.6.4
>
> Tested-by: Jun ASAKA <JunASAKA@zzy040330.moe>
> Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
> ---
> v3:
> - add detailed info about the newer version this patch used.
> - no functional update.
> ---
> .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 76 +++++++++++++------
> 1 file changed, 54 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
> index b06508d0cd..82346500f2 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
> @@ -734,6 +734,12 @@ static int rtl8192eu_iqk_path_a(struct rtl8xxxu_priv *priv)
> */
> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00180);
> +
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0x07f77);
> +> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>
> /* Path A IQK setting */
> @@ -779,11 +785,16 @@ static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
> - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
> +
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf1173);
>
> /* PA/PAD control by 0x56, and set = 0x0 */
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980);
> - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x511e0);
>
> /* Enter IQK mode */
> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
> @@ -798,14 +809,14 @@ static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>
> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f);
> - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160c1f);
> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x8216031f);
> + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x6816031f);
>
> /* LO calibration setting */
> rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
>
> /* One shot, path A LOK & IQK */
> - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
> + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
> rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
>
> mdelay(10);
> @@ -836,11 +847,16 @@ static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
> - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ff2);
> +
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ff2);
>
> /* PA/PAD control by 0x56, and set = 0x0 */
> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980);
> - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x510e0);
>
> /* Enter IQK mode */
> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
> @@ -854,14 +870,14 @@ static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>
> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f);
> - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f);
> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821608ff);
> + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281608ff);
>
> /* LO calibration setting */
> rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891);
>
> /* One shot, path A LOK & IQK */
> - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
> + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
> rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
>
> mdelay(10);
> @@ -891,22 +907,28 @@ static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv)
>
> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00180);
> - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>
> - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x20000);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0x07f77);
> +
> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>
> + // rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
> + // rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
> +
This commented code is not needed.
> /* Path B IQK setting */
> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>
> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x821403e2);
> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140303);
> rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000);
>
> /* LO calibration setting */
> - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00492911);
> + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
>
> /* One shot, path A LOK & IQK */
> rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
> @@ -942,11 +964,16 @@ static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
> - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf117b);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf1173);
> +
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
>
> /* PA/PAD control by 0x56, and set = 0x0 */
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980);
> - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x511e0);
>
> /* Enter IQK mode */
> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
> @@ -961,8 +988,8 @@ static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>
> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82160c1f);
> - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160c1f);
> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x8216031f);
> + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x6816031f);
>
> /* LO calibration setting */
> rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
> @@ -1002,11 +1029,16 @@ static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
> - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ffa);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ff2);
> +
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ff2);
These four lines you added here should be using RF_A.
>
> /* PA/PAD control by 0x56, and set = 0x0 */
> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980);
> - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000);
> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x510e0);
>
> /* Enter IQK mode */
> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
> @@ -1020,8 +1052,8 @@ static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c);
>
> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f);
> - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f);
> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821608ff);
> + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281608ff);
>
> /* LO calibration setting */
> rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891);
The rest of your changes look okay to me.
next prev parent reply other threads:[~2022-12-01 15:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-01 14:55 Jun ASAKA
2022-12-01 15:55 ` Bitterblue Smith [this message]
2022-12-01 16:16 ` Jun ASAKA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0ebf9f47-16bd-aad0-309f-af7616292785@gmail.com \
--to=rtl8821cerfe2@gmail.com \
--cc=Jes.Sorensen@gmail.com \
--cc=JunASAKA@zzy040330.moe \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®