Re: [PATCH] arm64: dts: imx8mp-phyboard-pollux-peb-av-10: Fix SAI master assignment

[Chancel Liu <chancel.liu@gmail.com>]

> The dailink_master label was incorrectly placed on the codec sub-node,
> causing simple-audio-card to configure TLV320AIC3007 as the I2S bitclock
> and frame master with SAI2 in consumer mode. This contradicts the SAI2
> node configuration (assigned-clock-parents, assigned-clock-rates,
> fsl,sai-mclk-direction-output) which requires provider/master mode.

Just a small question about the commit message. As far as I understand,
these SAI2 node configurations only describe SAI2 providing MCLK to the
codec. A topology where the SAI provides MCLK while the codec is the
bclk/fs provider is common. So the original configuration seems
self-consistent, not contradictory.

Regards,
Chancel Liu

> Restore dailink_master to the CPU sub-node so SAI2 drives BCLK and LRCLK
> with the codec operating as I2S slave. Also remove the spurious clocks
> property from the codec sub-node which had no effect in this topology.
> 
> This fixes the broken audio on PHYTEC phyBOARD-Pollux-i.MX8MP board with
> PEB-AV-10 Audio/Video expansion board.
> 
> Fixes: 7012f551081f ("arm64: dts: imx8mp pollux: add expansion board overlay")
> Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
> ---
>  .../boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi
> index bb740f845855..8957b24a7ad2 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi
> @@ -77,13 +77,12 @@ sound {
>  			"MIC3R", "Microphone Jack",
>  			"Microphone Jack", "Mic Bias";
>  
> -		simple-audio-card,cpu {
> +		dailink_master: simple-audio-card,cpu {
>  			sound-dai = <&sai2>;
>  		};
>  
> -		dailink_master: simple-audio-card,codec {
> +		simple-audio-card,codec {
>  			sound-dai = <&codec>;
> -			clocks = <&clk IMX8MP_CLK_SAI2>;
>  		};
>  	};
>  };