Re: [PATCH v2] arm64: dts: qcom: shikra: Add WCN clock to wcn3988-pmu node

[Yepuri Siddu <yepuri.siddu@oss.qualcomm.com>]

On 10/1/2026 8:28 AM, Bjorn Andersson wrote:
> On Tue, Sep 29, 2026 at 03:31:29PM +0530, Yepuri Siddu wrote:
>> With RPMCC proxy vote removal, the WCN clock must be explicitly declared
>> so the wcn3988-pmu driver can vote for it during WCN power on/off.
>>
>> Place the clock in the wcn3988-pmu node since the PMU driver owns the
>> WCN power sequencing. CQM SOM uses RPM_SMD_RF_CLK2 while IQS SOM uses
>> RPM_SMD_RF_CLK1, reflecting the WCN clock assignments on each board
>> variant.
>>
>> Signed-off-by: Yepuri Siddu <yepuri.siddu@oss.qualcomm.com>
>> ---
> 
> Why do you have one problem description above and a different one below?
> 
> The information after "---" is not merged so the git history only
> contains the one above - and there's some interesting details in the
> description below. Perhaps this is the b4 "cover letter"?

Yes, the detailed description was in the b4 cover letter body which
gets placed below "---" in the email automatically and does not make
it into git history.

> Please revise the commit message above with some of these technical
> details.

Will fix in v3 by merging the technical details into the commit message.

Thanks,
Siddu
>> clk_smd_rpm_handoff() votes both active and sleep RPM resource states for
>> every clock, keeping them non-zero until a consumer takes over. On Shikra,
>> the BT WCN clock was surviving on these proxy votes. With proxy vote
>> removal on QCM2290 [1], the sleep vote is no longer held, which means the
>> WCN clock must be explicitly declared in DTS so the wcn3988-pmu driver
>> can manage it during power sequencing.
>>
>> The clock is added to the wcn3988-pmu node in Shikra DTS. CQM SOM uses
>> RPM_SMD_RF_CLK2 while IQS SOM uses RPM_SMD_RF_CLK1, reflecting the WCN
>> clock assignments on each board variant.
>>
>> Validations:
>> - BT enable/disable verified on Shikra CQM, CQS and IQS EVK boards.
>> - Confirmed WCN clock voted on BT enable and released on BT disable.
>>
>> [1] https://lore.kernel.org/all/20260910-clk-smd-rpm-skip-proxy-v1-1-1cb5694a99d9@oss.qualcomm.com/
>> ---
>> Changes in v2:
>> - Move clock property to wcn3988-pmu node instead of bluetooth node.
>> - Drop hci_qca driver changes; clock is managed by the PMU driver.
>> - Link to v1: https://patch.msgid.link/20260925-bt-wcn-clk-enable-v1-0-30bee88c4de4@oss.qualcomm.com
>> ---
>>   arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi | 2 ++
>>   arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi | 2 ++
>>   2 files changed, 4 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi b/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
>> index 8ac42ff625a0..48af2bb87cf3 100644
>> --- a/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
>> @@ -45,6 +45,8 @@ wcn3988-pmu {
>>   		vddrf-supply = <&pm4125_l10>;
>>   		vddch0-supply = <&pm4125_l22>;
>>   
>> +		clocks = <&rpmcc RPM_SMD_RF_CLK2>;
>> +
>>   		regulators {
>>   			vreg_pmu_io: ldo0 {
>>   				regulator-name = "vreg_pmu_io";
>> diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi b/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi
>> index 4ff97945274d..90aceaa6e1e3 100644
>> --- a/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi
>> @@ -52,6 +52,8 @@ wcn3988-pmu {
>>   		vddrf-supply = <&pm8150_l8>;
>>   		vddch0-supply = <&vreg_wcn_3p3>;
>>   
>> +		clocks = <&rpmcc RPM_SMD_RF_CLK1>;
>> +
>>   		regulators {
>>   			vreg_pmu_io: ldo0 {
>>   				regulator-name = "vreg_pmu_io";
>>
>> ---
>> base-commit: 165768bb70265b5c38cf0b73fafd75be235f8b14
>> change-id: 20260925-bt-wcn-clk-enable-9de068334aa1
>>
>> Best regards,
>> --
>> Yepuri Siddu <yepuri.siddu@oss.qualcomm.com>
>>