From: Neil Armstrong <neil.armstrong@linaro.org>
To: Konrad Dybcio <konrad.dybcio@somainline.org>,
~postmarketos/upstreaming@lists.sr.ht
Cc: martin.botka@somainline.org,
angelogioacchino.delregno@somainline.org,
marijn.suijten@somainline.org, jamipkettunen@somainline.org,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: msm8998-yoshino: Fix up SMD regulators formatting
Date: Wed, 21 Sep 2022 09:14:52 +0200 [thread overview]
Message-ID: <0f1cce61-b2f4-79f0-5432-9a5559e8bf5c@linaro.org> (raw)
In-Reply-To: <20220921004741.152765-1-konrad.dybcio@somainline.org>
On 21/09/2022 02:47, Konrad Dybcio wrote:
> Add a new line between each subnode and make the { } consistent.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
> .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 33 ++++++++++++++++++-
> 1 file changed, 32 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> index d08639082247..862d859af885 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> @@ -410,131 +410,162 @@ vreg_s3a_1p35: s3 {
> regulator-min-microvolt = <1352000>;
> regulator-max-microvolt = <1352000>;
> };
> +
> vreg_s4a_1p8: s4 {
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> regulator-system-load = <100000>;
> regulator-allow-set-load;
> };
> +
> vreg_s5a_2p04: s5 {
> regulator-min-microvolt = <1904000>;
> regulator-max-microvolt = <2032000>;
> };
> +
> vreg_s7a_1p025: s7 {
> regulator-min-microvolt = <900000>;
> regulator-max-microvolt = <1028000>;
> };
> +
> vreg_l1a_0p875: l1 {
> regulator-min-microvolt = <880000>;
> regulator-max-microvolt = <880000>;
> regulator-system-load = <73400>;
> regulator-allow-set-load;
> };
> +
> vreg_l2a_1p2: l2 {
> regulator-min-microvolt = <1200000>;
> regulator-max-microvolt = <1200000>;
> regulator-system-load = <12560>;
> regulator-allow-set-load;
> };
> +
> vreg_l3a_1p0: l3 {
> regulator-min-microvolt = <1000000>;
> regulator-max-microvolt = <1000000>;
> };
> +
> vreg_l5a_0p8: l5 {
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <800000>;
> };
> +
> vreg_l6a_1p8: l6 {
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
> +
> vreg_l7a_1p8: l7 {
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
> +
> vreg_l8a_1p2: l8 {
> regulator-min-microvolt = <1200000>;
> regulator-max-microvolt = <1200000>;
> };
> +
> vreg_l9a_1p8: l9 {
> regulator-min-microvolt = <1808000>;
> regulator-max-microvolt = <2960000>;
> };
> +
> vreg_l10a_1p8: l10 {
> regulator-min-microvolt = <1808000>;
> regulator-max-microvolt = <2960000>;
> };
> +
> vreg_l11a_1p0: l11 {
> regulator-min-microvolt = <1000000>;
> regulator-max-microvolt = <1000000>;
> };
> +
> vreg_l12a_1p8: l12 {
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
> +
> vreg_l13a_2p95: l13 {
> regulator-min-microvolt = <1808000>;
> regulator-max-microvolt = <2960000>;
> regulator-allow-set-load;
> };
> +
> vreg_l14a_1p85: l14 {
> regulator-min-microvolt = <1848000>;
> regulator-max-microvolt = <1856000>;
> regulator-system-load = <32000>;
> regulator-allow-set-load;
> };
> +
> vreg_l15a_1p8: l15 {
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
> +
> vreg_l16a_2p7: l16 {
> regulator-min-microvolt = <2704000>;
> regulator-max-microvolt = <2704000>;
> };
> +
> vreg_l17a_1p3: l17 {
> regulator-min-microvolt = <1304000>;
> regulator-max-microvolt = <1304000>;
> };
> - vreg_l18a_2p85: l18 {};
> +
> + vreg_l18a_2p85: l18 { };
> +
> vreg_l19a_2p7: l19 {
> regulator-min-microvolt = <2696000>;
> regulator-max-microvolt = <2704000>;
> };
> +
> vreg_l20a_2p95: l20 {
> regulator-min-microvolt = <2960000>;
> regulator-max-microvolt = <2960000>;
> regulator-system-load = <10000>;
> regulator-allow-set-load;
> };
> +
> vreg_l21a_2p95: l21 {
> regulator-min-microvolt = <2960000>;
> regulator-max-microvolt = <2960000>;
> regulator-system-load = <800000>;
> regulator-allow-set-load;
> };
> +
> vreg_l22a_2p85: l22 { };
> +
> vreg_l23a_3p3: l23 {
> regulator-min-microvolt = <3312000>;
> regulator-max-microvolt = <3312000>;
> };
> +
> vreg_l24a_3p075: l24 {
> regulator-min-microvolt = <3088000>;
> regulator-max-microvolt = <3088000>;
> };
> +
> vreg_l25a_3p3: l25 {
> regulator-min-microvolt = <3104000>;
> regulator-max-microvolt = <3312000>;
> };
> +
> vreg_l26a_1p2: l26 {
> regulator-min-microvolt = <1200000>;
> regulator-max-microvolt = <1200000>;
> regulator-allow-set-load;
> };
> +
> vreg_l28_3p0: l28 {
> regulator-min-microvolt = <3000000>;
> regulator-max-microvolt = <3000000>;
> };
> +
> vreg_lvs1a_1p8: lvs1 { };
> +
> vreg_lvs2a_1p8: lvs2 { };
> };
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
next prev parent reply other threads:[~2022-09-21 7:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-21 0:47 Konrad Dybcio
2022-09-21 7:14 ` Neil Armstrong [this message]
2022-09-21 9:05 ` Krzysztof Kozlowski
2022-10-18 3:05 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0f1cce61-b2f4-79f0-5432-9a5559e8bf5c@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=devicetree@vger.kernel.org \
--cc=jamipkettunen@somainline.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka@somainline.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®