mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Macpaul Lin <macpaul.lin@mediatek.com>
To: "AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	"Bernhard Rosenkränzer" <bero@baylibre.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Cc: Bear Wang <bear.wang@mediatek.com>,
	Pablo Sun <pablo.sun@mediatek.com>,
	Macpaul Lin <macpaul@gmail.com>,
	Chris-QJ Chen <chris-qj.chen@mediatek.com>
Subject: Re: [PATCH v3 2/2] arm64: dts: mediatek: add device-tree for Genio 700 EVK board
Date: Fri, 15 Sep 2023 16:16:15 +0800	[thread overview]
Message-ID: <0f34d997-5464-f924-5f8a-b158ab13e7da@mediatek.com> (raw)
In-Reply-To: <8596fd5e-035b-b7be-3588-c07f27d1f38f@collabora.com>

On 9/14/23 18:02, AngeloGioacchino Del Regno wrote:
> Il 14/09/23 08:18, Macpaul Lin ha scritto:
>> Add basic device-tree for the Genio 700 EVK board. The
>> Genio 700 EVK is based on MediaTek MT8390 SoC.
>> MT8390 hardware register maps are identical to MT8188.
>>
>> The Genio 700 EVK has following features:
>>
>> - MT8390 SoC
>> - MT6365 PMIC
>> - MT6319 Buck IC
>> - 12V DC Jack
>> - 2x4GB LPDDR4X
>> - 64GB eMMC 5.1
>> - 64Mb SPI NOR
>> - M.2 Key A-E slot with PCIe Gen2 and USB 2.0
>> - 2x DSI LCM ports
>> - 2x touch sensor ports
>> - 2x MIPI-CSI, as camera daughter board slots
>> - USB 2 micro USB connector
>> - USB 3 with 1 to 2 hub:
>>    - M.2 Key B slot
>>    - Type-C connector, with DisplayPort over Type-C
>> - HDMI 2.0 TX port with Type A HDMI connector
>> - eDP port
>> - Gigabit Ethernet with RJ45 connector
>> - SD card slot
>> - Earphone Jack
>> - Analog Microphone
>> - 2x Digital Microphone
>> - 3x UART with serial-to-usb converters and micro USB connectors
>>
>> Signed-off-by: Chris-QJ Chen <chris-qj.chen@mediatek.com>
>> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
>> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
>> ---
>>   arch/arm64/boot/dts/mediatek/Makefile         |   1 +
>>   .../dts/mediatek/mt8390-genio-700-evk.dts     | 880 ++++++++++++++++++
>>   2 files changed, 881 insertions(+)
>>   create mode 100644 
>> arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
>>
>> dependencies for v1:
>>   - This patch should be applied after the following patch set
>>    - mt8365-gneio-350-evk's dts change (v4)
>>     - 
>> https://lore.kernel.org/linux-arm-kernel/20230912092444.31635-1-macpaul.lin@mediatek.com/T/ 
>>
>>    - mt8395-genio-1200-evk's dts basic support (v6)
>>     - 
>> https://lore.kernel.org/lkml/20230911115717.26184-1-macpaul.lin@mediatek.com/T/ 
>>
>>    - mt8188 platform's basic support
>>     - 
>> https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ 
>>
>>
>> changes for v2:
>>   - Fix gpio defines '0' to 'GPIO_ACTIVE_HIGH'.
>>   - Drop duplicate name: 'default' for I2C4.
>>   - Update dependencies
>>    - mt8365-gneio-350-evk's dts change (v5)
>>     - 
>> https://lore.kernel.org/lkml/20230913032226.4092-1-macpaul.lin@mediatek.com/ 
>>
>>    - mt8395-genio-1200-evk's dts basic support (v7)
>>     - 
>> https://lore.kernel.org/linux-arm-kernel/20230913032057.3197-1-macpaul.lin@mediatek.com/T/ 
>>
>>    - mt8188 platform's basic support (v4)
>>     - 
>> https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ 
>>
>>
>> changes for v3:
>>   - No change.
>>   - Update dependencies
>>    - mt8365-gneio-350-evk's dts change (v5)
>>     - 
>> https://lore.kernel.org/lkml/20230913032226.4092-1-macpaul.lin@mediatek.com/ 
>>
>>    - mt8395-genio-1200-evk's dts basic support (v8)
>>     - 
>> https://lore.kernel.org/lkml/20230914055145.16801-1-macpaul.lin@mediatek.com/T/ 
>>
>>    - mt8188 platform's basic support (v4)
>>     - 
>> https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/ 
>>
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile 
>> b/arch/arm64/boot/dts/mediatek/Makefile
>> index 22f362bbbdac..3262849c0f6b 100644
>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>> @@ -54,5 +54,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += 
>> mt8195-cherry-tomato-r3.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-genio-350-evk.dtb
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts 
>> b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
>> new file mode 100644
>> index 000000000000..ed6bbf0c15cc
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
>> @@ -0,0 +1,880 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * Copyright (C) 2023 MediaTek Inc.
>> + * Author: Chris Chen <chris-qj.chen@mediatek.com>
>> + *       Pablo Sun <pablo.sun@mediatek.com>
>> + *       Macpaul Lin <macpaul.lin@mediatek.com>
>> + */
>> +/dts-v1/;
>> +
>> +#include "mt8188.dtsi"
>> +#include "mt6359.dtsi"
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
>> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
>> +#include <dt-bindings/spmi/spmi.h>
>> +#include <dt-bindings/usb/pd.h>
>> +
>> +/ {
>> +    model = "MediaTek Genio-700 EVK";
>> +    compatible = "mediatek,mt8390-evk", "mediatek,mt8390",
>> +             "mediatek,mt8188";
>> +
> 
> ..snip..
> 
>> +
>> +&i2c0 {
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&i2c0_pins>;
>> +    clock-frequency = <400000>;
>> +    status = "okay";
>> +
>> +    touchscreen@5d {
>> +        compatible = "goodix,gt9271";
>> +        reg = <0x5d>;
>> +        interrupt-parent = <&pio>;
>> +        interrupts = <6 IRQ_TYPE_EDGE_RISING>;
> 
> interrupts-extended = <&pio 7 IRQ_TYPE_EDGE_RISING>;
> 
> after which:
> 
> Reviewed-by: AngeloGioacchino Del Regno 
> <angelogioacchino.delregno@collabora.com>
> 

Line 'interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;'
has been fixed in v4 patch.

Thanks!
Macpaul Lin

  reply	other threads:[~2023-09-15  8:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-14  6:18 [PATCH v3 1/2] dt-bindings: arm64: mediatek: add mt8390-evk board Macpaul Lin
2023-09-14  6:18 ` [PATCH v3 2/2] arm64: dts: mediatek: add device-tree for Genio 700 EVK board Macpaul Lin
2023-09-14 10:02   ` AngeloGioacchino Del Regno
2023-09-15  8:16     ` Macpaul Lin [this message]
2023-09-14 10:05 ` [PATCH v3 1/2] dt-bindings: arm64: mediatek: add mt8390-evk board AngeloGioacchino Del Regno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0f34d997-5464-f924-5f8a-b158ab13e7da@mediatek.com \
    --to=macpaul.lin@mediatek.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=bear.wang@mediatek.com \
    --cc=bero@baylibre.com \
    --cc=chris-qj.chen@mediatek.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=macpaul@gmail.com \
    --cc=matthias.bgg@gmail.com \
    --cc=pablo.sun@mediatek.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®