Linux version 2.4.13 (root@novalayer) (gcc version 2.95.4 20011006 (Debian prerelease)) #4 Sun Nov 4 16:43:12 EST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000eef0000 (usable) BIOS-e820: 000000000eef0000 - 000000000eeff000 (ACPI data) BIOS-e820: 000000000eeff000 - 000000000ef00000 (ACPI NVS) BIOS-e820: 000000000ef00000 - 000000000f000000 (usable) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) On node 0 totalpages: 61440 zone(0): 4096 pages. zone(1): 57344 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: root=/dev/hda3 ro Initializing CPU#0 Detected 896.925 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1789.13 BogoMIPS Memory: 236636k/245760k available (772k kernel code, 8668k reserved, 224k data, 204k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0383fbff c1c7fbff 00000000, vendor = 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1c7fbff 00000000 00000000 CPU: After generic, caps: 0383fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c7fbff 00000000 00000000 CPU: AMD Mobile AMD Duron(tm) Processor stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 896.8749 MHz. ..... host bus clock speed is 199.3054 MHz. cpu: 0, clocks: 1993054, slice: 996527 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: BIOS32 Service Directory structure at 0xc00f6d90 PCI: BIOS32 Service Directory entry at 0xfd690 PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=01 PCI: PCI BIOS revision 2.10 entry at 0xfd7ae, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: IDE base address fixup for 00:07.1 PCI: Scanning for ghost devices on bus 0 PCI: Scanning for ghost devices on bus 1 Unknown bridge resource 0: assuming transparent PCI: IRQ init PCI: Interrupt Routing Table found at 0xc00fdf50 00:09 slot=00 0:55/0010 1:57/0200 2:00/def8 3:00/def8 00:0b slot=00 0:56/0800 1:00/def8 2:00/def8 3:00/def8 00:0a slot=00 0:56/0800 1:00/def8 2:00/def8 3:00/def8 00:13 slot=00 0:55/0010 1:00/def8 2:00/def8 3:00/def8 00:00 slot=00 0:56/0020 1:00/def8 2:00/def8 3:00/def8 00:07 slot=00 0:55/0010 1:56/0800 2:56/0020 3:57/0200 00:01 slot=00 0:56/0020 1:00/def8 2:00/def8 3:00/def8 PCI: Attempting to find IRQ router for 1106:0596 PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI: IRQ fixup 00:0a.0: ignoring bogus IRQ 255 IRQ for 00:0a.0:0 -> PIRQ 56, mask 0800, excl 0000 -> newirq=0 ... failed PCI: Allocating resources PCI: Resource ec000000-efffffff (f=1208, d=0, p=0) PCI: Resource 00001840-0000184f (f=101, d=0, p=0) PCI: Resource 00001800-0000181f (f=101, d=0, p=0) PCI: Resource 00001000-000010ff (f=101, d=0, p=0) PCI: Resource 00001854-00001857 (f=105, d=0, p=0) PCI: Resource 00001850-00001853 (f=101, d=0, p=0) PCI: Resource e8000000-e800ffff (f=200, d=0, p=0) PCI: Resource 00001858-0000185f (f=109, d=0, p=0) PCI: Resource ffbfe000-ffbfefff (f=200, d=0, p=0) PCI: Resource 00001400-000014ff (f=101, d=0, p=0) PCI: Resource e8010000-e80100ff (f=200, d=0, p=0) PCI: Resource e8100000-e817ffff (f=200, d=0, p=0) PCI: Resource f0000000-f7ffffff (f=1208, d=0, p=0) PCI: Sorting device list... Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized devfs: v0.119 (20011009) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled block: 128 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3308 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done. Freeing initrd memory: 3308k freed VFS: Mounted root (cramfs filesystem). Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 42) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK2017GAP, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 39070080 sectors (20004 MB), CHS=38760/16/63 Partition check: /dev/ide/host0/bus0/target0/lun0: [PTBL] [2432/255/63] p1 p2 p3 cramfs: wrong magic VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=2 Freeing unused kernel memory: 204k freed spurious 8259A interrupt: IRQ7. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding Swap: 530136k swap-space (priority -1) Real Time Clock Driver v1.10e 8139too Fast Ethernet driver 0.9.20 IRQ for 00:0b.0:0 -> PIRQ 56, mask 0800, excl 0000 -> newirq=11 -> assigning IRQ 11 ... OK PCI: Assigned IRQ 11 for device 00:0b.0 IRQ routing conflict for 00:07.5, have irq 5, want irq 11 PCI: Sharing IRQ 11 with 00:0a.0 eth0: RealTek RTL8139 Fast Ethernet at 0xcf881000, 00:02:a5:a1:03:ee, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 IRQ for 00:07.2:3 -> PIRQ 57, mask 0200, excl 0000 -> newirq=9 -> assigning IRQ 9 ... OK PCI: Assigned IRQ 9 for device 00:07.2 uhci.c: USB UHCI at I/O 0x1800, IRQ 9 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Intel PCIC probe: not found. hub.c: USB new device connect on bus1/2, assigned device number 2 ds: no socket drivers loaded! usb.c: USB device 2 (vend/prod 0x46d/0xc00e) is not claimed by any active driver. mice: PS/2 mouse device common for all mice usb.c: registered new driver hiddev usb.c: registered new driver hid input0: USB HID v1.10 Mouse [Logitech Logitech] on usb1:2.0 hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers usb.c: registered new driver usb_mouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb-uhci.c: $Revision: 1.268 $ time 17:06:18 Nov 4 2001 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.268:USB Universal Host Controller Interface driver Via 686a audio driver 1.1.14b IRQ for 00:07.5:2 -> PIRQ 56, mask 0020, excl 0000 -> newirq=5 -> got IRQ 11 PCI: Found IRQ 11 for device 00:07.5 IRQ routing conflict for 00:07.5, have irq 5, want irq 11 PCI: Sharing IRQ 11 with 00:0a.0 PCI: Sharing IRQ 11 with 00:0b.0 via82cxxx: timeout while reading AC97 codec (0xAA0000) via82cxxx: timeout while reading AC97 codec (0xAA0000) via82cxxx: Codec rate locked at 48Khz via82cxxx: timeout while reading AC97 codec (0x800000) ac97_codec: AC97 codec, id: 0x4144:0x5361 (Unknown) via82cxxx: board #1 at 0x1000, IRQ 5