From: Scott White <scott@clubguide.com>
To: linux-kernel@vger.kernel.org
Subject: 2.4.14 doesn't compile: drivers/char/char.o(.text+0x13cb7): undefined reference to `register_serial'
Date: 06 Nov 2001 09:45:14 +0000 [thread overview]
Message-ID: <1005039914.5258.6.camel@lian> (raw)
I hope this is of use to you all. I am unable to compile 2.4.14 on my
system. I will start looking into it.
[root@lian linux]# make oldconfig
....
[root@lian linux]# make clean && make dep && make && make modules &&
make modules_install
....
gcc -D__KERNEL__ -I/usr/src/linux-2.4.14/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
-march=athlon -c -o mmx.o mmx.c
rm -f lib.a
ar rcs lib.a checksum.o old-checksum.o delay.o usercopy.o getuser.o
memcpy.o strstr.o mmx.o
make[2]: Leaving directory `/usr/src/linux-2.4.14/arch/i386/lib'
make[1]: Leaving directory `/usr/src/linux-2.4.14/arch/i386/lib'
ld -m elf_i386 -T /usr/src/linux-2.4.14/arch/i386/vmlinux.lds -e stext
arch/i386/kernel/head.o arch/i386/kernel/init_task.o init/main.o
init/version.o \
--start-group \
arch/i386/kernel/kernel.o arch/i386/mm/mm.o kernel/kernel.o mm/mm.o
fs/fs.o ipc/ipc.o \
drivers/char/char.o drivers/block/block.o drivers/misc/misc.o
drivers/net/net.o drivers/media/media.o drivers/char/drm/drm.o
drivers/ide/idedriver.o drivers/cdrom/driver.o
drivers/sound/sounddrivers.o drivers/pci/driver.o
drivers/net/pcmcia/pcmcia_net.o drivers/net/wireless/wireless_net.o
drivers/video/video.o \
net/network.o \
/usr/src/linux-2.4.14/arch/i386/lib/lib.a
/usr/src/linux-2.4.14/lib/lib.a
/usr/src/linux-2.4.14/arch/i386/lib/lib.a \
--end-group \
-o vmlinux
drivers/char/char.o: In function `register_serial_portandirq':
drivers/char/char.o(.text+0x13cb7): undefined reference to
`register_serial'
make: *** [vmlinux] Error 1
[root@lian linux]# uname -a
Linux lian 2.4.10-ac5 #2 Fri Oct 5 19:13:16 BST 2001 i686 unknown
[root@lian linux]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 10b9:1647 (Acer Laboratories Inc. [ALi])
(rev 2).
Prefetchable 32 bit memory at 0xf0000000 [0xf3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Acer Laboratories Inc. [ALi] M5247 (rev 0).
Master Capable. No bursts. Min Gnt=14.
Bus 0, device 2, function 0:
USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 3).
IRQ 10.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xdf001000 [0xdf001fff].
Bus 0, device 4, function 0:
IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev 196).
Master Capable. Latency=32. Min Gnt=2.Max Lat=4.
I/O at 0xd000 [0xd00f].
Bus 0, device 7, function 0:
ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV] (rev 0).
Bus 0, device 13, function 0:
Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink]
(rev 120).
IRQ 11.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0xd400 [0xd47f].
Non-prefetchable 32 bit memory at 0xdf000000 [0xdf00007f].
Bus 0, device 15, function 0:
Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
16).
IRQ 10.
Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
I/O at 0xd800 [0xd8ff].
Bus 0, device 16, function 0:
RAID bus controller: CMD Technology Inc PCI0649 (rev 2).
IRQ 10.
Master Capable. Latency=32. Min Gnt=2.Max Lat=4.
I/O at 0xdc00 [0xdc07].
I/O at 0xe000 [0xe003].
I/O at 0xe400 [0xe407].
I/O at 0xe800 [0xe803].
I/O at 0xec00 [0xec0f].
Bus 0, device 17, function 0:
Bridge: Acer Laboratories Inc. [ALi] M7101 PMU (rev 0).
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX)
(rev 178).
IRQ 5.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xdc000000 [0xdcffffff].
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
next reply other threads:[~2001-11-06 9:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-06 9:45 Scott White [this message]
2001-11-06 14:10 ` 2.4.14 doesn't compile: drivers/char/char.o(.text+0x13cb7):undefined " war
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1005039914.5258.6.camel@lian \
--to=scott@clubguide.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®