ACPI / APM - Battery level not readable on HP Omnibook XE3

[Lars Duesing <ld@stud.fh-muenchen.de>]

Hi List,

I do have some nice problem.
I got a new Omnibook XE3/1066, and wanted to install Linux.
Problems are growing big :)

All information regards to kernel 2.5.0.

One of my Problems is: I cannot read battery-level trough either acpi
nor apm.
On acpi kernel tells me on cat /proc/acpi/battery/1/info:
Present:		yes
Design Capacity:	5400 mAh
Last Full Capacity:	5400 mAh
...
Model Number:		LIP9071
...
Battery Type:		LiON
OEM Info:		HP

so far so good.
cat /proc/acpi/battery/1/status:
Present:		yes
Error reading battery status (_BST)

ouch.
best thing - next cat /proc/acpi/battery/1/info:
Present:		yes
Error reading battery information (_BIF)

double ouch.

Using APM results are more or less the same.

any hints?

thanks

	Lars Duesing


-- 
======================================================================
This mail may contain private and/or confidential information. 
If you are not the intended recipient, please discard this mail 
immediately. Any unauthorized use of the information in this mail is 
prohibited by international law.