From: Steven Cole <elenstev@mesatop.com>
To: Dave Jones <davej@suse.de>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] 2.5.7-dj1 add 5 help texts to arch/cris/Config.help
Date: 25 Mar 2002 18:42:45 -0700 [thread overview]
Message-ID: <1017106967.2680.5.camel@localhost.localdomain> (raw)
This patch adds 5 help texts to arch/cris/Config.help.
The texts were obtained from ESR's v2.97 Configure.help.
Steven
--- linux-2.5.7-dj1/arch/cris/Config.help.orig Mon Mar 25 13:53:25 2002
+++ linux-2.5.7-dj1/arch/cris/Config.help Mon Mar 25 13:53:59 2002
@@ -392,3 +392,26 @@
CONFIG_ETRAX_RESCUE_SER3
Use serial port 3 as the rescue port.
+CONFIG_ETRAX_POWERBUTTON_BIT
+ Configure where power button is connected.
+
+CONFIG_ETRAX_ROOT_DEVICE
+ Specifies the device that should be mounted as root file system
+ when booting from flash. The axisflashmap driver adds an additional
+ mtd partition for the appended root file system image, so this option
+ should normally be the mtdblock device for the partition after the
+ last partition in the partition table.
+
+CONFIG_ETRAX_SHUTDOWN_BIT
+ Configure what pin on CSPO-port that is used for controlling power
+ supply.
+
+CONFIG_ETRAX_SOFT_SHUTDOWN
+ Enable this if Etrax is used with a power-supply that can be turned
+ off and on with PS_ON signal. Gives the possibility to detect
+ powerbutton and then do a power off after unmounting disks.
+
+CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ By enabling this you make sure that the watchdog does not bite while
+ printing oopses. Recommended for development systems but not for
+ production releases.
reply other threads:[~2002-03-26 1:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1017106967.2680.5.camel@localhost.localdomain \
--to=elenstev@mesatop.com \
--cc=davej@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®