From: Terje Eggestad <terje.eggestad@scali.com>
To: zxj@water.pku.edu.cn
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: how to balance interrupts between 2 CPUs?
Date: 10 Apr 2002 16:14:52 +0200 [thread overview]
Message-ID: <1018448092.1479.39.camel@pc-16.office.scali.no> (raw)
In-Reply-To: <b5926afe75.afe75b5926@water.pku.edu.cn>
That is wierd you should have 4 CPU's. However I remember that Alan made
a patch for hyperthreading I *belive* is not in any 2.4.7 kernel.
I've a dual P4 Xeon 1.8Ghz with Intel chipset and 2.4.18smp, and I've:
te gcle1 ~ 4> cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 117524 117823 117105 117564 IO-APIC-edge timer
1: 108 105 109 109 IO-APIC-edge
keyboard
2: 0 0 0 0 XT-PIC
cascade
4: 96 119 92 116 IO-APIC-edge serial
8: 1 0 0 0 IO-APIC-edge rtc
9: 0 0 0 0 IO-APIC-edge acpi
15: 2 1 1 0 IO-APIC-edge ide1
16: 0 0 0 0 IO-APIC-level
usb-uhci
17: 1554 1572 1499 1622 IO-APIC-level eth0
18: 0 0 0 0 IO-APIC-level
usb-uhci
19: 0 0 0 0 IO-APIC-level
usb-uhci
28: 4937 4915 4881 5053 IO-APIC-level
aic7xxx
29: 4 4 4 4 IO-APIC-level
aic7xxx
NMI: 0 0 0 0 te gcle1 ~ 4> cat
/proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 117524 117823 117105 117564 IO-APIC-edge timer
1: 108 105 109 109 IO-APIC-edge
keyboard
2: 0 0 0 0 XT-PIC
cascade
4: 96 119 92 116 IO-APIC-edge serial
8: 1 0 0 0 IO-APIC-edge rtc
9: 0 0 0 0 IO-APIC-edge acpi
15: 2 1 1 0 IO-APIC-edge ide1
16: 0 0 0 0 IO-APIC-level
usb-uhci
17: 1554 1572 1499 1622 IO-APIC-level eth0
18: 0 0 0 0 IO-APIC-level
usb-uhci
19: 0 0 0 0 IO-APIC-level
usb-uhci
28: 4937 4915 4881 5053 IO-APIC-level
aic7xxx
29: 4 4 4 4 IO-APIC-level
aic7xxx
NMI: 0 0 0 0
LOC: 469377 469403 469435 469433
PMC: 0 0 0 0
ERR: 0
MIS: 0
te gcle1 ~ 5>
LOC: 469377 469403 469435 469433
PMC: 0 0 0 0
ERR: 0
MIS: 0
te gcle1 ~ 5>
On Wed, 2002-04-10 at 14:23, zxj@water.pku.edu.cn wrote:
> Hello
>
> I am using two Intel Giga NICs in a DELL PowerEdge 4600
> with 2 Intel XEON 1.8GHz CPUs.
> The matherboard is ServerWorks GC-HE.
> The OS is RedHat 7.2, and the release of kernel is "2.4.7-10smp".
>
> The CPU0 has very heavy interrupt traffic,
> you can see the following information:
> >>>>>
> [root@giga root]# cat /proc/interrupts
> CPU0 CPU1
> 0: 395117 0 IO-APIC-edge timer
> 1: 653 0 IO-APIC-edge keyboard
> 2: 0 0 XT-PIC cascade
> 8: 1 0 IO-APIC-edge rtc
> 12: 23 0 IO-APIC-edge PS/2 Mouse
> 14: 2 0 IO-APIC-edge ide0
> 18: 30 0 IO-APIC-level aic7xxx
> 19: 86013 0 IO-APIC-level eth0
> 20: 10394 0 IO-APIC-level aic7xxx
> 21: 30 0 IO-APIC-level aic7xxx
> 27: 5480873 0 IO-APIC-level e1000
> 39: 164889152 0 IO-APIC-level e1000
> NMI: 0 0
> LOC: 395013 395012
> ERR: 0
> MIS: 0
> >>>>>
>
> The kernel's SMP option is enable, but the CPU1 is always idle.
> How to balance the interrpupts between two CPUs?
> If you are convenient, please give me some advice quickly.
>
> Thank you!
>
> Best regard
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
_________________________________________________________________________
Terje Eggestad mailto:terje.eggestad@scali.no
Scali Scalable Linux Systems http://www.scali.com
Olaf Helsets Vei 6 tel: +47 22 62 89 61 (OFFICE)
P.O.Box 150, Oppsal +47 975 31 574 (MOBILE)
N-0619 Oslo fax: +47 22 62 89 51
NORWAY
_________________________________________________________________________
next prev parent reply other threads:[~2002-04-10 14:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <b5926afe75.afe75b5926@water.pku.edu.cn>
2002-04-10 12:54 ` Philippe Amelant
2002-04-10 13:21 ` lm0re
2002-04-10 14:06 ` Tim Kay
2002-04-10 14:14 ` Terje Eggestad [this message]
2002-04-10 14:31 ` Martin J. Bligh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1018448092.1479.39.camel@pc-16.office.scali.no \
--to=terje.eggestad@scali.com \
--cc=linux-kernel@vger.kernel.org \
--cc=zxj@water.pku.edu.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®