2.5.9 -- Build error -- scsidrv.o: In function `ahc_linux_halt': undefined reference to `ahc_tailq'

[Miles Lane <miles@megapathdsl.net>]

I searched on http://marc.theaimsgroup.com/?l=linux-kernel
and didn't find this mentioned.

drivers/scsi/scsidrv.o: In function `ahc_linux_halt':
drivers/scsi/scsidrv.o(.text+0x78cd): undefined reference to `ahc_tailq'
drivers/scsi/scsidrv.o(.text+0x78e2): undefined reference to
`ahc_shutdown'
drivers/scsi/scsidrv.o: In function `ahc_linux_detect':
drivers/scsi/scsidrv.o(.text+0x7fb7): undefined reference to `ahc_tailq'
drivers/scsi/scsidrv.o: In function `ahc_linux_register_host':
drivers/scsi/scsidrv.o(.text+0x80c6): undefined reference to
`ahc_set_unit'
drivers/scsi/scsidrv.o(.text+0x8109): undefined reference to
`ahc_set_name'

and so on.

Excerpts from my .config file info:

CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y

CONFIG_MODULES=y
CONFIG_KMOD=y

CONFIG_MK7=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_HAVE_DEC_LOCK=y

CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_DEBUG=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y

CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y

CONFIG_IDE=y

#
# ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDESCSI=m

CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_IDEDMA_AUTO=y

CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_BLK_DEV_SR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y

CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y

#
# SCSI low-level drivers
#
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000

Gnu C                  3.0.4
Gnu make               3.79.1
binutils               2.11.90.0.8
util-linux             2.11f
mount                  2.11g
modutils               2.4.14
e2fsprogs              1.26
reiserfsprogs          3.x.0j
pcmcia-cs              3.1.22
PPP                    2.4.1
isdn4k-utils           3.1pre1
Linux C Library        2.2.4
Dynamic linker (ldd)   2.2.4
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.3.3
Sh-utils               2.0.11