From: Samuel Flory <sflory@rackable.com>
To: Ernst Lehmann <lehmann@acheron.franken.de>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: Problems with Promise PDC 20265 and 2.4.19-rc1
Date: 16 Jul 2002 10:31:08 -0700 [thread overview]
Message-ID: <1026840669.2294.2723.camel@flory.corp.rackablelabs.com> (raw)
In-Reply-To: <1026818162.1039.19.camel@hadley>
Have you tried 2.4.19-rc1-ac(whatever # it is today)?
On Tue, 2002-07-16 at 04:16, Ernst Lehmann wrote:
> Hi,
>
> sorry, if this has been asked before, but I could not find any in the
> archives.
>
> I have a Gigabyte GA7DXR with a onboard Promise PDC20265 IDE-Controller.
>
> Attached to this Controller are 4 Maxtor 120 GB Disks.
>
> Booting with 2.4.18 works fine. The partitons of the disk are detecded,
> and I can access them.
>
> Booting with 2.4.19-rc1 hangs on bootup.
>
> The Promise is detected correctly.
>
> But when it comes to the partition-check the systems hangs:
>
> looks like this:
>
> ------snippel-------
> PDC20265: chipset revision 2
> PDC20265: not 100% native mode: will probe irqs later
> PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
> ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xc808-0xc80f, BIOS settings: hdg:DMA, hdh:DMA
> hda: IBM-DHEA-36481, ATA DISK drive
> hde: Maxtor 4G120J6, ATA DISK drive
> hdf: Maxtor 4G120J6, ATA DISK drive
> hdg: Maxtor 4G120J6, ATA DISK drive
> hdh: Maxtor 4G120J6, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide2 at 0xb800-0xb807,0xbc02 on irq 11
> ide3 at 0xc000-0xc007,0xc402 on irq 11
> hda: 12692736 sectors (6499 MB) w/472KiB Cache, CHS=790/255/63, UDMA(33)
> hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63,
> UDMA(100)
> hdf: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63,
> UDMA(100)
> hdg: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63,
> UDMA(100)
> hdh: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63,
> UDMA(100)
> Partition check:
> hda: hda1 hda2 hda3
> hde:
>
> --------------
>
> And here it hangs
>
>
> Because the patch between 2.4.18 and 2.4.19-rc1 is very big, there seem
> to be a lot of changes.
>
>
> Thanks in andvance for any help.....
>
>
>
>
> --
>
> Bye
>
> Ernst
> ---------
> Ernst Lehmann Email: lehmann@acheron.franken.de
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
prev parent reply other threads:[~2002-07-16 17:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-16 11:16 Ernst Lehmann
2002-07-16 17:31 ` Samuel Flory [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1026840669.2294.2723.camel@flory.corp.rackablelabs.com \
--to=sflory@rackable.com \
--cc=lehmann@acheron.franken.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®