Linux version 2.4.19 (root@ixodes.goop.org) (gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-108.7.2)) #8 Sat Aug 3 20:56:51 PDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffec000 (usable) BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data) BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262124 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32748 pages. Kernel command line: ro root=/dev/hda3 Found and enabled local APIC! Initializing CPU#0 Detected 1817.926 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3630.69 BogoMIPS Memory: 1033496k/1048496k available (1374k kernel code, 14612k reserved, 388k data, 244k init, 130992k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1817.9218 MHz. ..... host bus clock speed is 100.9955 MHz. cpu: 0, clocks: 1009955, slice: 504977 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1e90, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces Journalled Block Device driver loaded devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH4: (ide_setup_pci_device:) Could not enable device. hda: IBM-DTLA-307030, ATA DISK drive hdb: WDC WD400AW-00BYK0, ATA DISK drive hdc: ATAPI 48X CDROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 hdc: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > /dev/ide/host0/bus0/target1/lun0: p1 p2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) PCI: Found IRQ 9 for device 02:0a.0 tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. tulip0: MII transceiver #0 config 1000 status 782d advertising 01e1. eth0: Digital DS21140 Tulip rev 34 at 0xb400, 00:40:05:A1:8A:22, IRQ 9. SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 09:29:25 Aug 3 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:1d.1 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 10 for device 00:1d.2 PCI: Sharing IRQ 10 with 00:1f.1 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 244k freed hub.c: USB new device connect on bus2/1, assigned device number 2 usb-uhci.c: interrupt, status 2, frame# 555 usb.c: USB device not accepting new address=2 (error=-110) hub.c: USB new device connect on bus2/1, assigned device number 3 usb.c: USB device not accepting new address=3 (error=-110) hub.c: USB new device connect on bus2/2, assigned device number 4 input0,hiddev0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb2:4.0 Adding Swap: 524624k swap-space (priority -1) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,66), internal journal EXT3-fs: mounted filesystem with ordered data mode. /dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name: build-1790 $ /dev/vmmon: Module vmmon: initialized parport0: PC-style at 0x378 [PCSPP(,...)] /dev/vmnet: open called by PID 714 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: up bridge-eth0: attached /dev/vmnet: open called by PID 737 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 1125 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 1126 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 1153 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 1154 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2960 Tue May 14 07:41:42 PDT 2002 Creative EMU10K1 PCI Audio Driver, version 0.19, 09:32:44 Aug 3 2002 PCI: Found IRQ 9 for device 02:0c.0 emu10k1: EMU10K1 rev 7 model 0x8026 found, IO at 0xb000-0xb01f, IRQ 9 ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)