From: Samuel Flory <sflory@rackable.com>
To: Alan Cox <alan@redhat.com>
Cc: linux-kernel@vger.kernel.org
Subject: OSB4 issues on 2.4.19-ac4
Date: 06 Aug 2002 11:55:21 -0700 [thread overview]
Message-ID: <1028660121.4771.1242.camel@flory.corp.rackablelabs.com> (raw)
It appears that the OSB4 ide controller isn't working on ac4. I have
a Tyan 2515, and 2518 which hang when dma is enabled.
The 2518 hangs on a "hdparm -t /dev/hda" after enabling dma:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SvrWks OSB4: IDE controller on PCI bus 00 dev 79
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 5T040H4, ATA DISK drive
hdc: Maxtor 5T040H4, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63
hdc: host protected area => 1
hdc: setmax LBA 80043264, native 78125000
hdc: 78125000 sectors (40000 MB) w/2048KiB Cache, CHS=77504/16/63
ide-floppy driver 0.99.newide
Partition check:
hda: unknown partition table
hdc: unknown partition table
2515 hangs on a "hdparm -t /dev/hda" after enabling dma:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PDC20267: IDE controller on PCI bus 00 dev 18
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: ROM enabled at 0xfeae0000
PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
ide2: BM-DMA at 0xdf00-0xdf07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdg:pio, hdh:pio
SvrWks OSB4: IDE controller on PCI bus 00 dev 79
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: ST320410A, ATA DISK drive
hdc: ST320410A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63
hdc: host protected area => 1
hdc: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
hdc: [PTBL] [2434/255/63] hdc1 hdc2 hdc3
next reply other threads:[~2002-08-06 18:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-06 18:55 Samuel Flory [this message]
2002-08-06 22:01 ` Alan Cox
2002-08-06 20:58 ` Jonathan Lundell
2002-08-06 22:37 ` Alan Cox
2002-08-06 22:39 ` Samuel Flory
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1028660121.4771.1242.camel@flory.corp.rackablelabs.com \
--to=sflory@rackable.com \
--cc=alan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®