From: Daniel Egger <degger@fhm.edu>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.4.20-pre2-ac5 Promise PDC20269
Date: 22 Aug 2002 13:53:56 +0200 [thread overview]
Message-ID: <1030017237.5486.2.camel@sonja.de.interearth.com> (raw)
In-Reply-To: <1029942175.26411.83.camel@irongate.swansea.linux.org.uk>
[-- Attachment #1.1: Type: text/plain, Size: 232 bytes --]
Am Mit, 2002-08-21 um 17.02 schrieb Alan Cox:
> Please send me an lspci -v, the drive info and the dmesg. I can at least
> add it to the reports to find patters even if nothing else
Attached.
--
Servus,
Daniel
[-- Attachment #1.2: out --]
[-- Type: text/plain, Size: 9202 bytes --]
/dev/hda:
Model=IBM-DTLA-307015, FwRev=TX2OA50C, SerialNo=YF0YFT57413
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=30003120
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 2 3 4 5
Linux version 2.4.18-k6 (herbert@gondolin) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sun Apr 14 12:43:22 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=302 ide0=dma ide1=dma
Initializing CPU#0
Detected 801.443 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1599.07 BogoMIPS
Memory: 253560k/262080k available (799k kernel code, 8132k reserved, 220k data, 196k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2556 blocks [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\bdone.
Freeing initrd memory: 2556k freed
VFS: Mounted root (cramfs filesystem).
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DTLA-307015, ATA DISK drive
hdc: 24X10, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 30003120 sectors (15362 MB) w/1916KiB Cache, CHS=29765/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [1867/255/63] p1 p2 p3 p4 < p5 p6 >
cramfs: wrong magic
reiserfs: checking transaction log (device 03:02) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
change_root: old root has d_count=2
Freeing unused kernel memory: 196k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 136512k swap-space (priority -1)
Real Time Clock Driver v1.10e
Via 686a audio driver 1.9.1
PCI: Found IRQ 5 for device 00:07.5
ac97_codec: AC97 Audio codec, id: 0x414c:0x4325 (Unknown)
via82cxxx: Codec rate locked at 48Khz
via82cxxx: board #1 at 0xDC00, IRQ 5
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: ATAPI Model: CD-R/RW 24X10 Rev: P.MJ
Type: CD-ROM ANSI SCSI revision: 02
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 10 for device 00:09.0
eth0: RealTek RTL8139 Fast Ethernet at 0xd0a0f000, 00:e0:7d:94:e5:33, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)
Subsystem: Elitegroup Computer Systems: Unknown device 0979
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d2000000-d4ffffff
Capabilities: [80] Power Management version 2
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Bus Master IDE
Flags: bus master, medium devsel, latency 32
I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 10) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Subsystem: Elitegroup Computer Systems: Unknown device 0979
Flags: medium devsel, IRQ 3
Capabilities: [68] Power Management version 2
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20)
Subsystem: Avance Logic Inc.: Unknown device 10ec
Flags: medium devsel, IRQ 5
I/O ports at dc00 [size=256]
I/O ports at e000 [size=4]
I/O ports at e400 [size=4]
Capabilities: [c0] Power Management version 2
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at e800 [size=256]
Memory at d5000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Pro Turbo AGP 2X
Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at c000 [size=256]
Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
[-- Attachment #2: Dies ist ein digital signierter Nachrichtenteil --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
prev parent reply other threads:[~2002-08-22 11:46 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-21 2:11 Jason C. Pion
2002-08-21 2:40 ` Andre Hedrick
2002-08-21 3:15 ` Erik Andersen
2002-08-21 3:40 ` Andre Hedrick
2002-08-21 7:41 ` Andre Hedrick
2002-08-21 13:46 ` Alan Cox
2002-08-21 14:05 ` Daniel Egger
2002-08-21 15:02 ` Alan Cox
2002-08-22 11:53 ` Daniel Egger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1030017237.5486.2.camel@sonja.de.interearth.com \
--to=degger@fhm.edu \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®