Linux version 2.4.19 (root@castaway.home.sv) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 Wed Oct 9 13:30:38 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. Advanced speculative caching feature not present On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=debug root=307 console=ttyS0,115200 Initializing CPU#0 Detected 1002.307 MHz processor. Console: colour VGA+ 80x60 Calibrating delay loop... 1998.84 BogoMIPS Memory: 256916k/262080k available (1170k kernel code, 4776k reserved, 298k data, 240k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09 Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:07.0 Applying VIA southbridge workaround. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx HPT370A: IDE controller on PCI bus 00 dev 70 PCI: Found IRQ 5 for device 00:0e.0 PCI: Sharing IRQ 5 with 00:09.0 HPT370A: chipset revision 4 HPT370A: not 100% native mode: will probe irqs later HPT370: using 33MHz PCI clock ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 34098H4, ATA DISK drive ide0 at 0xb000-0xb007,0xb402 on irq 5 hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=79408/16/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > PCI: Found IRQ 11 for device 00:0a.0 PCI: Sharing IRQ 11 with 00:07.5 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0a.0: 3Com PCI 3c905C Tornado at 0xac00. Vers LK1.1.16 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 03:07) ... Warning, log replay starting on readonly filesystem reiserfs: replayed 31 transactions in 2 seconds Using tea hash to sort names reiserfs: using 3.5.x disk format ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 240k freed Adding Swap: 393520k swap-space (priority -1) reiserfs: Unrecognized mount option errors reiserfs: Unrecognized mount option errors 8139too Fast Ethernet driver 0.9.25 CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 1.1.4.1 HiSax: Layer2 Revision 1.1.4.1 HiSax: TeiMgr Revision 1.1.4.1 HiSax: Layer3 Revision 1.1.4.1 HiSax: LinkLayer Revision 1.1.4.1 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: AVM PCI driver Rev. 1.1.4.1 FritzPCI: No PCI card found HiSax: Card AVM Fritz PnP/PCI not installed ! SCSI subsystem driver Revision: 1.00 parport0: PC-style at 0x378 [PCSPP,EPP] parport_pc: Via 686A parallel port: io=0x378 lp0: using parport0 (polling). Non-volatile memory driver v1.1 i2c-core.o: i2c core module i2c-algo-pcf.o: i2c pcf8584 algorithm module mice: PS/2 mouse device common for all mice GRE over IPv4 tunneling driver IPv4 over IPv4 tunneling driver isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled loop: loaded (max 8 devices) PCI: Found IRQ 5 for device 00:09.0 PCI: Sharing IRQ 5 with 00:0e.0 (scsi0) found at PCI 0/9/0 (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs (scsi0) Downloading sequencer code... 415 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0 Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 3605 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:0:3:1) Synchronous at 4.0 Mbyte/sec, offset 15. Vendor: TEAC Model: CD-R55S Rev: 1.0L Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 5, lun 0 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 (scsi0:0:5:0) Synchronous at 8.0 Mbyte/sec, offset 15. sr1: scsi-1 drive usb.c: registered new driver hub cs46xx: Unable to detect valid cs46xx device usb.c: registered new driver usb_mouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver Via 686a audio driver 1.9.1 PCI: Found IRQ 11 for device 00:07.5 PCI: Sharing IRQ 11 with 00:0a.0 ac97_codec: AC97 Audio codec, id: 0x4943:0x4511 (ICE1232) via82cxxx: board #1 at 0x9C00, IRQ 11 at 0x330 irq 11 dma 0,0 Enabled Via MIDI matroxfb: Matrox G400 (AGP) detected matroxfb: MTRR's turned on matroxfb: 640x480x8bpp (virtual: 640x26208) matroxfb: framebuffer at 0xD4000000, mapped to 0xd0a44000, size 33554432 Console: switching to colour frame buffer device 80x30 fb0: MATROX VGA frame buffer device I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 127 Linux I2O PCI support (c) 1999 Red Hat Software. i2o: Checking for PCI I2O controllers... Terminating i2o threads...waiting...exiting...done. I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 129 I2O Block Storage OSM v0.9 (c) Copyright 1999-2001 Red Hat Software. i2o_block: registered device at major 80 i2o_block: Checking for Boot device... i2o_block: Checking for I2O Block devices... I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software I2O LAN OSM (C) 1999 University of Helsinki. isdnloop-ISDN-driver Rev 1.1.4.1 [drm:drm_init] *ERROR* Cannot initialize the agpgart module. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize inserting floppy driver for 2.4.19 FDC 0 is a post-1991 82077 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: overridden by ACPI. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: overridden by ACPI. eth0: Setting promiscuous mode. device eth0 entered promiscuous mode