Re: [PATCH v1] arm64: dts: qcom: ipq5424: add cooling maps for CPU thermal zones

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 10/23/25 6:38 AM, Manikanta Mylavarapu wrote:
> Add cooling-maps to the cpu1, cpu2, and cpu3 thermal zones to associate
> passive trip points with CPU cooling devices. This enables proper
> thermal mitigation by allowing the thermal framework to throttle CPUs
> based on temperature thresholds. Also, label the trip points to allow
> referencing them in the cooling maps.
> 
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> ---

[...]

>  		cpu1-thermal {
> @@ -1254,18 +1269,28 @@ cpu1-thermal {
>  			thermal-sensors = <&tsens 12>;
>  
>  			trips {
> -				cpu-critical {
> +				cpu1_crit: cpu-critical {
>  					temperature = <120000>;
>  					hysteresis = <9000>;
>  					type = "critical";
>  				};
>  
> -				cpu-passive {
> +				cpu1_alert: cpu-passive {
>  					temperature = <110000>;
>  					hysteresis = <9000>;
>  					type = "passive";
>  				};

This means "software will start throttling the cpufreq at 110C"

Is this what you want?

Also, is there nothing like LMH on this platform that throttles the
device way earlier, without OS intervention?

Konrad