mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: john stultz <johnstul@us.ibm.com>
To: lkml <linux-kernel@vger.kernel.org>
Subject: [RFC] [PATCH] linux-2.5.59_cyclone-fixes_A0
Date: 24 Jan 2003 11:37:44 -0800	[thread overview]
Message-ID: <1043437064.15683.187.camel@w-jstultz2.beaverton.ibm.com> (raw)

All, 
	In order for the timer_cyclone.c code to be enabled, the following
issues need to be remedied.

1) fast_gettimeoffset_quotient (initialized in timer_tsc->init()) is
used outside of timer_tsc.c Thus it either needs to be made static or
initialized in timer_cyclone.c

2) cpu_khz is only initialized in timer_tsc->init(). Either timer_tsc
needs to initialize in timer_tsc as well, or it needs to be initialized
outside the timer subsystem. 

Now I have more "proper" patches for these issues, which makes
fast_gettimeoffset_quotient static and initializes cpu_khz in
cpu/common.c (which could be later expanded to making cpu_khz per-cpu). 

However these patches move a reasonable amount of code around and touch
generic code in a number of places. So instead I've created this patch
as a "quick-fix" by duplicating some of the timer_tsc->init() code into
timer_cyclone->init(). This way we can still enable the timer_cyclone 
code w/o touching any generic code (well, I do have to un-static
calibrate_tsc())

Honestly, I'm not super happy about doing it this way, but I do realize
the slush needs to thicken. However, I will continue to push the cleanup
patches, but this way the cyclone code won't depend on them.  

Comments, suggestions and flames welcome.

thanks
-john
 

diff -Nru a/arch/i386/kernel/timers/timer_cyclone.c b/arch/i386/kernel/timers/timer_cyclone.c
--- a/arch/i386/kernel/timers/timer_cyclone.c	Wed Jan 22 13:35:09 2003
+++ b/arch/i386/kernel/timers/timer_cyclone.c	Wed Jan 22 13:35:09 2003
@@ -17,7 +17,7 @@
 #include <asm/fixmap.h>
 
 extern spinlock_t i8253_lock;
-
+extern unsigned long fast_gettimeoffset_quotient;
 /* Number of usecs that the last interrupt was delayed */
 static int delay_at_last_interrupt;
 
@@ -142,6 +142,28 @@
 			printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
 			cyclone_timer = 0;
 			return -ENODEV;
+		}
+	}
+
+	/* init fast_gettimeoffset_quotent and cpu_khz.
+	 * XXX - This should really be done elsewhere, 
+	 * 		and in a more generic fashion. -johnstul@us.ibm.com
+	 */
+	if (cpu_has_tsc) {
+		unsigned long tsc_quotient = calibrate_tsc();
+		if (tsc_quotient) {
+			fast_gettimeoffset_quotient = tsc_quotient;
+			/* report CPU clock rate in Hz.
+			 * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+			 * clock/second. Our precision is about 100 ppm.
+			 */
+			{	unsigned long eax=0, edx=1000;
+				__asm__("divl %2"
+		       		:"=a" (cpu_khz), "=d" (edx)
+        	       		:"r" (tsc_quotient),
+	                	"0" (eax), "1" (edx));
+				printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+			}
 		}
 	}
 
diff -Nru a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
--- a/arch/i386/kernel/timers/timer_tsc.c	Wed Jan 22 13:35:09 2003
+++ b/arch/i386/kernel/timers/timer_tsc.c	Wed Jan 22 13:35:09 2003
@@ -130,7 +130,7 @@
 #define CALIBRATE_LATCH	(5 * LATCH)
 #define CALIBRATE_TIME	(5 * 1000020/HZ)
 
-static unsigned long __init calibrate_tsc(void)
+unsigned long __init calibrate_tsc(void)
 {
        /* Set the Gate high, disable speaker */
 	outb((inb(0x61) & ~0x02) | 0x01, 0x61);




             reply	other threads:[~2003-01-24 19:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-01-24 19:37 john stultz [this message]
2003-01-24 19:38 ` [RFC] [PATCH] linux-2.5.59_enable-cyclone_A0 john stultz
2003-02-03 19:46 [RFC][PATCH] linux-2.5.59_cyclone-fixes_A0 john stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1043437064.15683.187.camel@w-jstultz2.beaverton.ibm.com \
    --to=johnstul@us.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®