00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64, cache line size 08

00:00.2 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

00:00.3 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

00:03.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller
	Subsystem: Compaq Computer Corporation: Unknown device b0f3
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 0
	Region 0: I/O ports at 1800 [size=256]
	Region 1: Memory at f7df0000 (32-bit, non-prefetchable) [size=256]

00:04.0 RAID bus controller: Symbios Logic Inc. (formerly NCR): Unknown device 0010 (rev 02)
	Subsystem: Compaq Computer Corporation: Unknown device 4040
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 192 (7500ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
	Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at <unassigned> [disabled] [size=512K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:05.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA])
	Subsystem: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min), cache line size 08
	Region 0: Memory at f3000000 (32-bit, prefetchable) [size=16M]
	Region 1: I/O ports at 2400 [size=256]
	Region 2: Memory at f4ff0000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [5c] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 51)
	Subsystem: ServerWorks OSB4 South Bridge
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller (prog-if 8a [Master SecP PriP])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 2800 [size=16]

01:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 3
	Region 0: I/O ports at 3000 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

01:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 3080 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

01:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 3
	Region 0: I/O ports at 3400 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

01:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 3480 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

02:05.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Controller (rev 12)
	Subsystem: Compaq Computer Corporation: Unknown device a2f8
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f7ef0000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000

02:06.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
	I/O behind bridge: 00004000-00004fff
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

02:08.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Bus: primary=02, secondary=04, subordinate=04, sec-latency=64
	I/O behind bridge: 00005000-00005fff
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

02:09.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Bus: primary=02, secondary=05, subordinate=05, sec-latency=64
	I/O behind bridge: 00006000-00006fff
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

03:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 4000 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

03:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 4080 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

03:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 4400 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

03:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 4480 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

04:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 5000 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

04:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 3
	Region 0: I/O ports at 5080 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

04:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 5400 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

04:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 3
	Region 0: I/O ports at 5480 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

05:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 6000 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

05:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 6080 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

05:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 6400 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

05:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 6480 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

07:05.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Controller (rev 12)
	Subsystem: Compaq Computer Corporation: Unknown device a2f9
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f7ff0000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000

07:07.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Bus: primary=07, secondary=08, subordinate=08, sec-latency=64
	I/O behind bridge: 00007000-00007fff
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

08:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 7000 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

08:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 7080 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

08:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 7400 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

08:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12)
	Subsystem: D-Link System Inc: Unknown device 1012
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 7480 [size=128]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-