vortex-diag.c:v2.14 12/28/2002 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a 3CCFE575CT CardBus adapter at 0x1400.
 Station address 00:04:75:ab:6f:cc.
  Receive mode is 0x07: Normal unicast and all multicast.
The Vortex chip may be active, so FIFO registers will not be read.
To see all register values use the '-f' flag.
Initial window 7, registers values by window:
  Window 0: 0000 0000 0000 0000 5555 06ff ffff 0000.
  Window 1: FIFO FIFO 0000 0000 0000 0000 0000 2000.
  Window 2: 0400 ab75 cc6f 0000 0000 0000 4102 4000.
  Window 3: 0000 0060 05ea 0020 0040 1000 0800 6000.
  Window 4: 0000 0000 0000 0ce0 0003 a800 0000 8000.
  Window 5: 1ffc 0000 0000 0600 0807 06ce 06c6 a000.
  Window 6: 0000 0000 0000 0e00 0000 04ec 06ac c000.
  Window 7: 0000 0000 0000 0000 0000 0000 0000 e000.
Vortex chip registers at 0x1400
  0x1410: **FIFO** 00000000 0000001d *STATUS*
  0x1420: 00000020 00000000 00080000 00000004
  0x1430: 00000000 200cdff4 0f2e9170 00080004
  0x1440: 0076bb4f 00000000 00000000 00000000
  0x1450: 00000000 00000000 00000000 00000000
  0x1460: 00000000 00000000 00000000 00000000
  0x1470: 00000000 00000000 00200000 00000000
  DMA control register is 00000020.
   Tx list starts at 00000000.
   Tx FIFO thresholds: min. burst 256 bytes, priority with 128 bytes to empty.
   Rx FIFO thresholds: min. burst 256 bytes, priority with 128 bytes to full.
   Poll period Tx 00 ns.,  Rx 0 ns.
   Maximum burst recorded Tx 0,  Rx 32.
 Indication enable is 06c6, interrupt enable is 06ce.
 No interrupt sources are pending.
 Transceiver/media interfaces available:  MII.
Transceiver type in use:  MII.
 MAC settings: full-duplex.
 Station address set to 00:04:75:ab:6f:cc.
 Configuration options 4102.