From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263718AbTDDMfW (for ); Fri, 4 Apr 2003 07:35:22 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263715AbTDDMfW (for ); Fri, 4 Apr 2003 07:35:22 -0500 Received: from [213.187.222.25] ([213.187.222.25]:31666 "EHLO palpatine.ludvika.nu") by vger.kernel.org with ESMTP id S263729AbTDDM2c (for ); Fri, 4 Apr 2003 07:28:32 -0500 Subject: RE: Promise TX4 100: neither IDE port enabled From: Adam Johansson To: Jonathan Vardy Cc: linux-kernel@vger.kernel.org In-Reply-To: <73300040777B0F44B8CE29C87A0782E101FA9875@exchange.explainerdc.com> References: <73300040777B0F44B8CE29C87A0782E101FA9875@exchange.explainerdc.com> Content-Type: text/plain Organization: Message-Id: <1049459997.1851.4.camel@dgc.madsci.se> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.2.1Rubber Turnip Date: 04 Apr 2003 14:39:57 +0200 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, I can confirm with my experiences with both Ultra and Fasttrak under recent 2.4.20+ kernels fail detecting more than UDMA33 on these cards. Without knowing the cause or fix for it I instead run ac-patches. The card(s) are than configured correctly. I now run 2.4.21pre5ac3 and I remember 2.4.21pre4ac4 also worked fine. Cheers! Adam Johansson On Fri, 2003-04-04 at 12:56, Jonathan Vardy wrote: > I've rebooted using the orignal Red Hat kernel (2.4.20) and it > recongnizes the Promise card. Here are the details: > > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > PIIX4: IDE controller at PCI slot 00:04.1 > PIIX4: chipset revision 1 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio > PDC20270: IDE controller at PCI slot 02:01.0 > PDC20270: chipset revision 2 > PDC20270: not 100% native mode: will probe irqs later > ide2: BM-DMA at 0x9040-0x9047, BIOS settings: hde:pio, hdf:pio > ide3: BM-DMA at 0x9048-0x904f, BIOS settings: hdg:pio, hdh:pio > ide4: BM-DMA at 0x90c0-0x90c7, BIOS settings: hdi:pio, hdj:pio > ide5: BM-DMA at 0x90c8-0x90cf, BIOS settings: hdk:pio, hdl:pio > hda: Maxtor 2B020H1, ATA DISK drive > blk: queue c0453420, I/O limit 4095Mb (mask 0xffffffff) > hdc: WDC WD1200BB-00CAA1, ATA DISK drive > blk: queue c04538a0, I/O limit 4095Mb (mask 0xffffffff) > hde: WDC WD1200BB-60CJA1, ATA DISK drive > blk: queue c0453d20, I/O limit 4095Mb (mask 0xffffffff) > hdg: WDC WD1200BB-60CJA1, ATA DISK drive > blk: queue c04541a0, I/O limit 4095Mb (mask 0xffffffff) > hdi: WDC WD1200BB-60CJA1, ATA DISK drive > blk: queue c0454620, I/O limit 4095Mb (mask 0xffffffff) > hdk: WDC WD1200BB-60CJA1, ATA DISK drive > blk: queue c0454aa0, I/O limit 4095Mb (mask 0xffffffff) > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ide2 at 0x9000-0x9007,0x9012 on irq 19 > ide3 at 0x9020-0x9027,0x9032 on irq 19 > ide4 at 0x9080-0x9087,0x9092 on irq 19 > ide5 at 0x90a0-0x90a7,0x90b2 on irq 19 > hda: host protected area => 1 > hda: 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=2431/255/63, > UDMA(33) > hdc: host protected area => 1 > hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, > UDMA(33) > hde: host protected area => 1 > hde: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, > UDMA(100) > hdg: host protected area => 1 > hdg: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, > UDMA(100) > hdi: host protected area => 1 > hdi: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, > UDMA(100) > hdk: host protected area => 1 > hdk: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, > UDMA(100) > > > Better results but doen anybody know why 2.4.21pre6 can't detect it > right? > > > > > ide: Assuming 33MHz system bus speed for PIO modes; override > > with idebus=xx > > PIIX4: IDE controller at PCI slot 00:04.1 > > PIIX4: chipset revision 1 > > PIIX4: not 100% native mode: will probe irqs later > > ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio > > ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio > > PDC20270: IDE controller at PCI slot 02:01.0 > > PDC20270: chipset revision 2 > > PDC20270: not 100% native mode: will probe irqs later > > PDC20270: neither IDE port enabled (BIOS) > > PDC20270: neither IDE port enabled (BIOS) > > hda: Maxtor 2B020H1, ATA DISK drive > > blk: queue c0395860, I/O limit 4095Mb (mask 0xffffffff) > > hdc: WDC WD1200BB-00CAA1, ATA DISK drive > > blk: queue c0395cd0, I/O limit 4095Mb (mask 0xffffffff) > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > hda: host protected area => 1 > > hda: 39062500 sectors (20000 MB) w/2048KiB Cache, > > CHS=2431/255/63, UDMA(33) > > hdc: host protected area => 1 > > hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, > > CHS=232581/16/63, UDMA(33) > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ >